- Home
- Collections
- K-Tuned Brand
- Honda
K-Tuned Brand
K-TUNED TIMING CHAIN TENSIONER FOR K SERIES ENGINES
Applications: All K-Series engines except K24Z series. NOTE: It is recommended to u...
Applications: All K-Series engines except K24Z series. NOTE: It is recommended to use a new chain with install. You want to avoid reusing an old stretched chain. The K-Tuned Timing Chain Tensioner was designed in conjunction with an oem parts manufacturer and features an upgraded internal spring to support the use of higher lift cams in modified K engines. We have also built the tensioner with reduced overall travel, which will keep it tight against the chain at all times...
{"id":10592290504,"title":"K-TUNED TIMING CHAIN TENSIONER FOR K SERIES ENGINES","handle":"ktd-ten-009","description":"\u003cbody\u003e\n \u003cp\u003e\n \u003cspan style=\"color: red;\"\u003eApplications:\u003c\/span\u003e All K-Series engines except K24Z series.\u003cbr\u003e\n \u003cbr\u003e\n \u003cspan style=\"color: red;\"\u003eNOTE:\u003c\/span\u003e It is recommended to use a new chain with install. You want to avoid reusing an old stretched chain.\u003cbr\u003e\n \u003cbr\u003e\n The K-Tuned Timing Chain Tensioner was designed in conjunction with an oem parts manufacturer and features an upgraded internal spring to support the use of higher lift cams in modified K engines. We have also built the tensioner with reduced overall travel, which will keep it tight against the chain at all times and won't allow it to back off as much as the stock unit. After reviewing some of the past and present designs, we are even backing up our K-Tuned Chain Tensioners with a no-hassle rebuild warranty. If you see any questionable wear or have any question on the internal condition of the tensioner, simply send it back to K-Tuned for a $60 rebuild. We can even offer this service to racers who do not want to risk possible failure of their high dollar engines to a failed tensioner. This service will allow racers to change the tensioner out at frequent intervals or as needed.\u003c\/p\u003e\n \u003c\/body\u003e","published_at":"2017-08-25T13:46:07-07:00","created_at":"2017-08-25T13:46:08-07:00","vendor":"VEX Motorsports","type":"Engine Accessories","tags":["Acura","Honda"],"price":19900,"price_min":19900,"price_max":19900,"available":true,"price_varies":false,"compare_at_price":24875,"compare_at_price_min":24875,"compare_at_price_max":24875,"compare_at_price_varies":false,"variants":[{"id":44657569672,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ktdKTD-TEN-009","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-TUNED TIMING CHAIN TENSIONER FOR K SERIES ENGINES","public_title":null,"options":["Default Title"],"price":19900,"weight":454,"compare_at_price":24875,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/ktd-ten-009.jpg?v=1676688783"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/ktd-ten-009.jpg?v=1676688783","options":["Title"],"media":[{"alt":null,"id":27910140985502,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/vexms.com\/cdn\/shop\/products\/ktd-ten-009.jpg?v=1676688783"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/ktd-ten-009.jpg?v=1676688783","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e\n \u003cp\u003e\n \u003cspan style=\"color: red;\"\u003eApplications:\u003c\/span\u003e All K-Series engines except K24Z series.\u003cbr\u003e\n \u003cbr\u003e\n \u003cspan style=\"color: red;\"\u003eNOTE:\u003c\/span\u003e It is recommended to use a new chain with install. You want to avoid reusing an old stretched chain.\u003cbr\u003e\n \u003cbr\u003e\n The K-Tuned Timing Chain Tensioner was designed in conjunction with an oem parts manufacturer and features an upgraded internal spring to support the use of higher lift cams in modified K engines. We have also built the tensioner with reduced overall travel, which will keep it tight against the chain at all times and won't allow it to back off as much as the stock unit. After reviewing some of the past and present designs, we are even backing up our K-Tuned Chain Tensioners with a no-hassle rebuild warranty. If you see any questionable wear or have any question on the internal condition of the tensioner, simply send it back to K-Tuned for a $60 rebuild. We can even offer this service to racers who do not want to risk possible failure of their high dollar engines to a failed tensioner. This service will allow racers to change the tensioner out at frequent intervals or as needed.\u003c\/p\u003e\n \u003c\/body\u003e"} [{"id":481971336,"handle":"k-tuned-brand","title":"K-Tuned Brand","updated_at":"2023-03-21T12:55:22-07:00","body_html":"","published_at":"2017-09-15T00:42:50-07:00","sort_order":"best-selling","template_suffix":"","disjunctive":false,"rules":[{"column":"title","relation":"starts_with","condition":"K-tuned"}],"published_scope":"global","image":{"created_at":"2017-09-15T00:43:10-07:00","alt":"","width":270,"height":270,"src":"\/\/vexms.com\/cdn\/shop\/collections\/ktuned.jpg?v=1505461390"}}]
$199.00
$248.75
K-TUNED STREET SPEC OEM SHIFTER CABLE KIT FOR K SERIES 1988-2000 HONDA CIVIC
Shifter cables have been a high demand part in the K-Series community for a few years now....
Shifter cables have been a high demand part in the K-Series community for a few years now. If you are putting together a K-swapped car and didn't get the shifter cable set with your engine, you can either try to find them used or get them brand new from a local Honda/Acura dealer. The problem with the dealership is they can be expensive and occasionally they are on backorder which means there is a wait time to get them in hand. K-Tuned OEM-Spec / Street Shifter Cables are a strong and ...
{"id":10592290376,"title":"K-TUNED STREET SPEC OEM SHIFTER CABLE KIT FOR K SERIES 1988-2000 HONDA CIVIC","handle":"sft-cab-oem","description":"\u003cbody\u003e \u003cp\u003e Shifter cables have been a high demand part in the K-Series community for a few years now. If you are putting together a K-swapped car and didn't get the shifter cable set with your engine, you can either try to find them used or get them brand new from a local Honda\/Acura dealer. The problem with the dealership is they can be expensive and occasionally they are on backorder which means there is a wait time to get them in hand. K-Tuned OEM-Spec \/ Street Shifter Cables are a strong and cost effective replacement for all OEM 2002-2006 RSX cables. Fitment and overall length is identical to OEM which makes them compatible with all OEM and K-Tuned shifter boxes, as well as many other aftermarket shifter box options.\u003c\/p\u003e \u003cp\u003e These OEM-Spec Shifter Cables are made entirely of high quality materials and they were designed to meet or exceed the OEM units in all areas of construction. The transmission side of the cables features our 6061 billet aluminum shifter bushings at both connections. The unique design of these bushings allows for slight flexibility at the joint which is critical for precise shifting. These bushings improve shift feel and accuracy when compared to the factory rubber bushings. K-Tuned also offer their Billet Shifter Cable Bushings separately for anyone that already has OEM cables and may want to upgrade. K-Tuned cable set is sold complete with all hardware for installation. This includes 4 reusable \"hairpin style\" cotter pins for all cable end connections, and 3 cable retaining clips. Note that 1 of the connections uses a self-locking setup on the shifter side. Our OEM-Spec Shifter Cables are priced right, made to last and work flawlessly. Race car owners may also want to check out K-Tuned Race-Spec Shifter Cables, they are the best shifter cables available for your K-Series powered car.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2017-08-25T13:46:06-07:00","created_at":"2017-08-25T13:46:07-07:00","vendor":"VEX Motorsports","type":"Short Shifter","tags":["Acura","Honda"],"price":25199,"price_min":25199,"price_max":25199,"available":true,"price_varies":false,"compare_at_price":31499,"compare_at_price_min":31499,"compare_at_price_max":31499,"compare_at_price_varies":false,"variants":[{"id":44657567752,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KTDSFT-CAB-OEM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-TUNED STREET SPEC OEM SHIFTER CABLE KIT FOR K SERIES 1988-2000 HONDA CIVIC","public_title":null,"options":["Default Title"],"price":25199,"weight":1814,"compare_at_price":31499,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/s-l1600.jpg?v=1676458144"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/s-l1600.jpg?v=1676458144","options":["Title"],"media":[{"alt":null,"id":27890431066270,"position":1,"preview_image":{"aspect_ratio":1.0,"height":80,"width":80,"src":"\/\/vexms.com\/cdn\/shop\/products\/s-l1600.jpg?v=1676458144"},"aspect_ratio":1.0,"height":80,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/s-l1600.jpg?v=1676458144","width":80}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e Shifter cables have been a high demand part in the K-Series community for a few years now. If you are putting together a K-swapped car and didn't get the shifter cable set with your engine, you can either try to find them used or get them brand new from a local Honda\/Acura dealer. The problem with the dealership is they can be expensive and occasionally they are on backorder which means there is a wait time to get them in hand. K-Tuned OEM-Spec \/ Street Shifter Cables are a strong and cost effective replacement for all OEM 2002-2006 RSX cables. Fitment and overall length is identical to OEM which makes them compatible with all OEM and K-Tuned shifter boxes, as well as many other aftermarket shifter box options.\u003c\/p\u003e \u003cp\u003e These OEM-Spec Shifter Cables are made entirely of high quality materials and they were designed to meet or exceed the OEM units in all areas of construction. The transmission side of the cables features our 6061 billet aluminum shifter bushings at both connections. The unique design of these bushings allows for slight flexibility at the joint which is critical for precise shifting. These bushings improve shift feel and accuracy when compared to the factory rubber bushings. K-Tuned also offer their Billet Shifter Cable Bushings separately for anyone that already has OEM cables and may want to upgrade. K-Tuned cable set is sold complete with all hardware for installation. This includes 4 reusable \"hairpin style\" cotter pins for all cable end connections, and 3 cable retaining clips. Note that 1 of the connections uses a self-locking setup on the shifter side. Our OEM-Spec Shifter Cables are priced right, made to last and work flawlessly. Race car owners may also want to check out K-Tuned Race-Spec Shifter Cables, they are the best shifter cables available for your K-Series powered car.\u003c\/p\u003e \u003c\/body\u003e"} [{"id":481971336,"handle":"k-tuned-brand","title":"K-Tuned Brand","updated_at":"2023-03-21T12:55:22-07:00","body_html":"","published_at":"2017-09-15T00:42:50-07:00","sort_order":"best-selling","template_suffix":"","disjunctive":false,"rules":[{"column":"title","relation":"starts_with","condition":"K-tuned"}],"published_scope":"global","image":{"created_at":"2017-09-15T00:43:10-07:00","alt":"","width":270,"height":270,"src":"\/\/vexms.com\/cdn\/shop\/collections\/ktuned.jpg?v=1505461390"}},{"id":450802376,"handle":"shifter-kits","title":"Shifter Kits Interior","updated_at":"2024-04-24T10:13:38-07:00","body_html":"","published_at":"2017-07-22T00:16:42-07:00","sort_order":"best-selling","template_suffix":"","disjunctive":false,"rules":[{"column":"title","relation":"contains","condition":"shifter"}],"published_scope":"global"}]
$251.99
$314.99
K-TUNED STEEL OIL PAN W/ HARDWARE & MAGNETIC DRAIN PLUG FOR HONDA/ACURA K SERIES
Applications: Direct replacement for all K20A, K20A2 and K20Z1 engines. Plus K20A3, K...
Applications: Direct replacement for all K20A, K20A2 and K20Z1 engines. Plus K20A3, K24A1, K24A4 engines which originally had a steel oil pan. May fit other hybrid applications where an RSX Type-S oil pump is used. Please inquire with us before ordering if you are uncertain about fitment. When switching to a steel you can purchase a flywheel cover (Inspection Cover) from Honda, part number 21351-PNA-000. If you have been playing around with the Ho...
{"id":10592320968,"title":"K-TUNED STEEL OIL PAN W\/ HARDWARE \u0026 MAGNETIC DRAIN PLUG FOR HONDA\/ACURA K SERIES","handle":"ktd-olp-kit","description":"\u003cbody\u003e \u003cdiv class=\"r-tabs-panel r-tabs-state-active\" id=\"tab-1\" style=\"display: block;\"\u003e \u003cdiv class=\"item\" itemprop=\"description\"\u003e \u003cspan style=\"color: red;\"\u003eApplications:\u003c\/span\u003e Direct replacement for all K20A, K20A2 and K20Z1 engines. Plus K20A3, K24A1, K24A4 engines which originally had a steel oil pan. May fit other hybrid applications where an RSX Type-S oil pump is used. Please inquire with us before ordering if you are uncertain about fitment. \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e When switching to a steel you can purchase a flywheel cover (Inspection Cover) from Honda, part number 21351-PNA-000. \u003cbr\u003e \u003cbr\u003e If you have been playing around with the Honda K-Series engine long enough chances are you have seen a broken oil pan or two. Part of the problem is that a K20A, A2 or Z1 engine mounted in a K-swapped car (EG\/DC2\/EK) sits approx. 3\/4\" lower when compared to the older B engine. The other problem is the oil pan on these engines is made of cast aluminum which does not hold up well if it is hit by something hard. The result is usually a crack or even worse, the pan shatters and takes off a piece of the block girdle with it.\u003cbr\u003e \u003cbr\u003e K-Tuned Oil Pans are made with thick gauge powdercoated steel which will more than likely just dent if they get hit. Choose to buy our complete kit with oil pan, magnetic drain plug with K logo and a set of 16 bolts which are needed if installing on a K20A\/A2 or Z1 engine. Most people forget or don't know that the original bolts for the aluminum pan are longer and will not work with the steel pan. The other option is to buy the pan only with no drain plug or bolts, which is perfect for guys replacing an existing damaged pan or who are building a new engine. To ensure the pan is sealed properly, we recommend using either Hondabond or Permatex Ultra Grey Sealer, part number 82194.\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cp\u003e \u003c\/p\u003e \u003c\/body\u003e","published_at":"2017-08-25T13:55:11-07:00","created_at":"2017-08-25T13:55:12-07:00","vendor":"VEX Motorsports","type":"Engine Accessories","tags":["Acura","Honda"],"price":11999,"price_min":11999,"price_max":11999,"available":true,"price_varies":false,"compare_at_price":14999,"compare_at_price_min":14999,"compare_at_price_max":14999,"compare_at_price_varies":false,"variants":[{"id":44658127560,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ktdKTD-OLP-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-TUNED STEEL OIL PAN W\/ HARDWARE \u0026 MAGNETIC DRAIN PLUG FOR HONDA\/ACURA K SERIES","public_title":null,"options":["Default Title"],"price":11999,"weight":2268,"compare_at_price":14999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/l_ktd-olp-kit.jpg?v=1676663689"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/l_ktd-olp-kit.jpg?v=1676663689","options":["Title"],"media":[{"alt":null,"id":27908672716958,"position":1,"preview_image":{"aspect_ratio":1.509,"height":477,"width":720,"src":"\/\/vexms.com\/cdn\/shop\/products\/l_ktd-olp-kit.jpg?v=1676663689"},"aspect_ratio":1.509,"height":477,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/l_ktd-olp-kit.jpg?v=1676663689","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cdiv class=\"r-tabs-panel r-tabs-state-active\" id=\"tab-1\" style=\"display: block;\"\u003e \u003cdiv class=\"item\" itemprop=\"description\"\u003e \u003cspan style=\"color: red;\"\u003eApplications:\u003c\/span\u003e Direct replacement for all K20A, K20A2 and K20Z1 engines. Plus K20A3, K24A1, K24A4 engines which originally had a steel oil pan. May fit other hybrid applications where an RSX Type-S oil pump is used. Please inquire with us before ordering if you are uncertain about fitment. \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e When switching to a steel you can purchase a flywheel cover (Inspection Cover) from Honda, part number 21351-PNA-000. \u003cbr\u003e \u003cbr\u003e If you have been playing around with the Honda K-Series engine long enough chances are you have seen a broken oil pan or two. Part of the problem is that a K20A, A2 or Z1 engine mounted in a K-swapped car (EG\/DC2\/EK) sits approx. 3\/4\" lower when compared to the older B engine. The other problem is the oil pan on these engines is made of cast aluminum which does not hold up well if it is hit by something hard. The result is usually a crack or even worse, the pan shatters and takes off a piece of the block girdle with it.\u003cbr\u003e \u003cbr\u003e K-Tuned Oil Pans are made with thick gauge powdercoated steel which will more than likely just dent if they get hit. Choose to buy our complete kit with oil pan, magnetic drain plug with K logo and a set of 16 bolts which are needed if installing on a K20A\/A2 or Z1 engine. Most people forget or don't know that the original bolts for the aluminum pan are longer and will not work with the steel pan. The other option is to buy the pan only with no drain plug or bolts, which is perfect for guys replacing an existing damaged pan or who are building a new engine. To ensure the pan is sealed properly, we recommend using either Hondabond or Permatex Ultra Grey Sealer, part number 82194.\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cp\u003e \u003c\/p\u003e \u003c\/body\u003e"} [{"id":481971336,"handle":"k-tuned-brand","title":"K-Tuned Brand","updated_at":"2023-03-21T12:55:22-07:00","body_html":"","published_at":"2017-09-15T00:42:50-07:00","sort_order":"best-selling","template_suffix":"","disjunctive":false,"rules":[{"column":"title","relation":"starts_with","condition":"K-tuned"}],"published_scope":"global","image":{"created_at":"2017-09-15T00:43:10-07:00","alt":"","width":270,"height":270,"src":"\/\/vexms.com\/cdn\/shop\/collections\/ktuned.jpg?v=1505461390"}}]
$119.99
$149.99
K-TUNED STEEL OIL PAN FOR HONDA AND ACURA K SERIES ENGINES
DOES NOT COME WITH DRAIN PLUG Applications: Direct replacement for all K20A, K20A2 and...
DOES NOT COME WITH DRAIN PLUG Applications: Direct replacement for all K20A, K20A2 and K20Z1 engines. Plus K20A3, K24A1, K24A4 engines which originally had a steel oil pan. May fit other hybrid applications where an RSX Type-S oil pump is used. Please inquire with us before ordering if you are uncertain about fitment. When switching to a steel you can purchase a flywheel cover (Inspection Cover) from Honda, part number 21351-PNA-000. If you have be...
{"id":10592290312,"title":"K-TUNED STEEL OIL PAN FOR HONDA AND ACURA K SERIES ENGINES","handle":"ktd-olp-pan","description":"DOES NOT COME WITH DRAIN PLUG\u003cbr\u003e\u003cbr\u003e \u003cdiv class=\"r-tabs-panel r-tabs-state-active\" id=\"tab-1\" style=\"display: block;\"\u003e \u003cdiv class=\"item\" itemprop=\"description\"\u003e \u003cspan style=\"color: red;\"\u003eApplications:\u003c\/span\u003e Direct replacement for all K20A, K20A2 and K20Z1 engines. Plus K20A3, K24A1, K24A4 engines which originally had a steel oil pan. May fit other hybrid applications where an RSX Type-S oil pump is used. Please inquire with us before ordering if you are uncertain about fitment. \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e When switching to a steel you can purchase a flywheel cover (Inspection Cover) from Honda, part number 21351-PNA-000. \u003cbr\u003e \u003cbr\u003e If you have been playing around with the Honda K-Series engine long enough chances are you have seen a broken oil pan or two. Part of the problem is that a K20A, A2 or Z1 engine mounted in a K-swapped car (EG\/DC2\/EK) sits approx. 3\/4\" lower when compared to the older B engine. The other problem is the oil pan on these engines is made of cast aluminum which does not hold up well if it is hit by something hard. The result is usually a crack or even worse, the pan shatters and takes off a piece of the block girdle with it.\u003cbr\u003e \u003cbr\u003e K-Tuned Oil Pans are made with thick gauge powdercoated steel which will more than likely just dent if they get hit. Choose to buy our complete kit with oil pan, magnetic drain plug with K logo and a set of 16 bolts which are needed if installing on a K20A\/A2 or Z1 engine. Most people forget or don't know that the original bolts for the aluminum pan are longer and will not work with the steel pan. The other option is to buy the pan only with no drain plug or bolts, which is perfect for guys replacing an existing damaged pan or who are building a new engine. To ensure the pan is sealed properly, we recommend using either Hondabond or Permatex Ultra Grey Sealer, part number 82194.\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cp\u003e \u003c\/p\u003e","published_at":"2017-08-25T13:46:05-07:00","created_at":"2017-08-25T13:46:06-07:00","vendor":"VEX Motorsports","type":"Engine Accessories","tags":["Acura","Honda"],"price":11900,"price_min":11900,"price_max":11900,"available":true,"price_varies":false,"compare_at_price":14875,"compare_at_price_min":14875,"compare_at_price_max":14875,"compare_at_price_varies":false,"variants":[{"id":44657567688,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ktdKTD-OLP-PAN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-TUNED STEEL OIL PAN FOR HONDA AND ACURA K SERIES ENGINES","public_title":null,"options":["Default Title"],"price":11900,"weight":2268,"compare_at_price":14875,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/57.jpg?v=1676670043"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/57.jpg?v=1676670043","options":["Title"],"media":[{"alt":null,"id":27909059739806,"position":1,"preview_image":{"aspect_ratio":1.512,"height":529,"width":800,"src":"\/\/vexms.com\/cdn\/shop\/products\/57.jpg?v=1676670043"},"aspect_ratio":1.512,"height":529,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/57.jpg?v=1676670043","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"DOES NOT COME WITH DRAIN PLUG\u003cbr\u003e\u003cbr\u003e \u003cdiv class=\"r-tabs-panel r-tabs-state-active\" id=\"tab-1\" style=\"display: block;\"\u003e \u003cdiv class=\"item\" itemprop=\"description\"\u003e \u003cspan style=\"color: red;\"\u003eApplications:\u003c\/span\u003e Direct replacement for all K20A, K20A2 and K20Z1 engines. Plus K20A3, K24A1, K24A4 engines which originally had a steel oil pan. May fit other hybrid applications where an RSX Type-S oil pump is used. Please inquire with us before ordering if you are uncertain about fitment. \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e When switching to a steel you can purchase a flywheel cover (Inspection Cover) from Honda, part number 21351-PNA-000. \u003cbr\u003e \u003cbr\u003e If you have been playing around with the Honda K-Series engine long enough chances are you have seen a broken oil pan or two. Part of the problem is that a K20A, A2 or Z1 engine mounted in a K-swapped car (EG\/DC2\/EK) sits approx. 3\/4\" lower when compared to the older B engine. The other problem is the oil pan on these engines is made of cast aluminum which does not hold up well if it is hit by something hard. The result is usually a crack or even worse, the pan shatters and takes off a piece of the block girdle with it.\u003cbr\u003e \u003cbr\u003e K-Tuned Oil Pans are made with thick gauge powdercoated steel which will more than likely just dent if they get hit. Choose to buy our complete kit with oil pan, magnetic drain plug with K logo and a set of 16 bolts which are needed if installing on a K20A\/A2 or Z1 engine. Most people forget or don't know that the original bolts for the aluminum pan are longer and will not work with the steel pan. The other option is to buy the pan only with no drain plug or bolts, which is perfect for guys replacing an existing damaged pan or who are building a new engine. To ensure the pan is sealed properly, we recommend using either Hondabond or Permatex Ultra Grey Sealer, part number 82194.\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cp\u003e \u003c\/p\u003e"} [{"id":481971336,"handle":"k-tuned-brand","title":"K-Tuned Brand","updated_at":"2023-03-21T12:55:22-07:00","body_html":"","published_at":"2017-09-15T00:42:50-07:00","sort_order":"best-selling","template_suffix":"","disjunctive":false,"rules":[{"column":"title","relation":"starts_with","condition":"K-tuned"}],"published_scope":"global","image":{"created_at":"2017-09-15T00:43:10-07:00","alt":"","width":270,"height":270,"src":"\/\/vexms.com\/cdn\/shop\/collections\/ktuned.jpg?v=1505461390"}}]
$119.00
$148.75
K-TUNED PRO SERIES TRACTION BAR FOR 1988-1991 HONDA CIVIC & 1988-1991 HONDA CRX
Key Features: Fits with all motor swaps: B series, D series, ZC swaps Pro Series Gen 3 B...
Key Features: Fits with all motor swaps: B series, D series, ZC swaps Pro Series Gen 3 Bars, fully new design to completely eliminate any failures Aluminum Swaged radius arms (stronger and better) Tig and Mig welded for the best strength New double rod end (heim joints) on each end of the radius arm Control arm mounting tabs Full mounting hardware package included New ultra tough powder coating, the strongest and thickest ever New high quality packaging so it gets to you in ti...
{"id":10592290120,"title":"K-TUNED PRO SERIES TRACTION BAR FOR 1988-1991 HONDA CIVIC \u0026 1988-1991 HONDA CRX","handle":"8891-tb-101","description":"\u003cbody\u003e \u003ctable border=\"0\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e \u003cp\u003e \u003cspan style=\"font-weight: bold;\"\u003eKey Features:\u003c\/span\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Fits with all motor swaps: B series, D series, ZC swaps\u003c\/li\u003e \u003cli\u003e Pro Series Gen 3 Bars, fully new design to completely eliminate any failures\u003c\/li\u003e \u003cli\u003e Aluminum Swaged radius arms (stronger and better)\u003c\/li\u003e \u003cli\u003e Tig and Mig welded for the best strength\u003c\/li\u003e \u003cli\u003e New double rod end (heim joints) on each end of the radius arm\u003c\/li\u003e \u003cli\u003e Control arm mounting tabs\u003c\/li\u003e \u003cli\u003e Full mounting hardware package included\u003c\/li\u003e \u003cli\u003e New ultra tough powder coating, the strongest and thickest ever\u003c\/li\u003e \u003cli\u003e New high quality packaging so it gets to you in tip top condition!\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd\u003e \u003cp\u003e \u003cspan style=\"font-weight: bold;\"\u003eFits:\u003c\/span\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 88-91 Civic EF\u003c\/li\u003e \u003cli\u003e 88-91 CRX\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e \u003cspan style=\"font-weight: bold;\"\u003eThese bars are the strongest ETD makes and the best in the industry. We use only the best high-grade steel and chromoly in the construction and the strongest hardware money can buy. These bars are designed for high hp street and track dedicated cars.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e Engineered from extensive track testing and racing, ETD Racing Traction bars are developed to improve traction and handling. ETD Racing Traction Bars bolts on to your factory tow hook mounting locations. We don’t just sell these bars we use them on our race cars.\u003cbr\u003e \u003cbr\u003e Components are CNC machined and laser cut from 1\/4\" steel and finished with a durable powder coating. The radius arms are thick walled polished aluminum to ensure a strong and solid arm to prevent from fatigue and breakage. With the versatility of the radius arms, fitment is perfect every time and adjustability is only a twist away. The Main bar is made from \u003cspan style=\"font-weight: bold;\"\u003eChromoly\u003c\/span\u003e and the end plates from the best high-grade steel available.\u003cbr\u003e \u003cbr\u003e - Does not interfere with stock rad points.\u003cbr\u003e - Full Bolt on installation\u003cbr\u003e - Eliminates Front Crash mount which is not needed and reduces overall weight\u003cbr\u003e - Perfect for Street cars\u003c\/p\u003e \u003c\/body\u003e","published_at":"2017-08-25T13:46:01-07:00","created_at":"2017-08-25T13:46:03-07:00","vendor":"VEX Motorsports","type":"Traction Bar","tags":["Honda"],"price":31499,"price_min":31499,"price_max":31499,"available":true,"price_varies":false,"compare_at_price":39374,"compare_at_price_min":39374,"compare_at_price_max":39374,"compare_at_price_varies":false,"variants":[{"id":44657566600,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ktd8891-TB-101","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-TUNED PRO SERIES TRACTION BAR FOR 1988-1991 HONDA CIVIC \u0026 1988-1991 HONDA CRX","public_title":null,"options":["Default Title"],"price":31499,"weight":6804,"compare_at_price":39374,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/8891-tb-101.jpg?v=1676477758"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/8891-tb-101.jpg?v=1676477758","options":["Title"],"media":[{"alt":null,"id":27893454143646,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/vexms.com\/cdn\/shop\/products\/8891-tb-101.jpg?v=1676477758"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/8891-tb-101.jpg?v=1676477758","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003ctable border=\"0\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e \u003cp\u003e \u003cspan style=\"font-weight: bold;\"\u003eKey Features:\u003c\/span\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e Fits with all motor swaps: B series, D series, ZC swaps\u003c\/li\u003e \u003cli\u003e Pro Series Gen 3 Bars, fully new design to completely eliminate any failures\u003c\/li\u003e \u003cli\u003e Aluminum Swaged radius arms (stronger and better)\u003c\/li\u003e \u003cli\u003e Tig and Mig welded for the best strength\u003c\/li\u003e \u003cli\u003e New double rod end (heim joints) on each end of the radius arm\u003c\/li\u003e \u003cli\u003e Control arm mounting tabs\u003c\/li\u003e \u003cli\u003e Full mounting hardware package included\u003c\/li\u003e \u003cli\u003e New ultra tough powder coating, the strongest and thickest ever\u003c\/li\u003e \u003cli\u003e New high quality packaging so it gets to you in tip top condition!\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd\u003e \u003cp\u003e \u003cspan style=\"font-weight: bold;\"\u003eFits:\u003c\/span\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e 88-91 Civic EF\u003c\/li\u003e \u003cli\u003e 88-91 CRX\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e \u003cspan style=\"font-weight: bold;\"\u003eThese bars are the strongest ETD makes and the best in the industry. We use only the best high-grade steel and chromoly in the construction and the strongest hardware money can buy. These bars are designed for high hp street and track dedicated cars.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e Engineered from extensive track testing and racing, ETD Racing Traction bars are developed to improve traction and handling. ETD Racing Traction Bars bolts on to your factory tow hook mounting locations. We don’t just sell these bars we use them on our race cars.\u003cbr\u003e \u003cbr\u003e Components are CNC machined and laser cut from 1\/4\" steel and finished with a durable powder coating. The radius arms are thick walled polished aluminum to ensure a strong and solid arm to prevent from fatigue and breakage. With the versatility of the radius arms, fitment is perfect every time and adjustability is only a twist away. The Main bar is made from \u003cspan style=\"font-weight: bold;\"\u003eChromoly\u003c\/span\u003e and the end plates from the best high-grade steel available.\u003cbr\u003e \u003cbr\u003e - Does not interfere with stock rad points.\u003cbr\u003e - Full Bolt on installation\u003cbr\u003e - Eliminates Front Crash mount which is not needed and reduces overall weight\u003cbr\u003e - Perfect for Street cars\u003c\/p\u003e \u003c\/body\u003e"} [{"id":481971336,"handle":"k-tuned-brand","title":"K-Tuned Brand","updated_at":"2023-03-21T12:55:22-07:00","body_html":"","published_at":"2017-09-15T00:42:50-07:00","sort_order":"best-selling","template_suffix":"","disjunctive":false,"rules":[{"column":"title","relation":"starts_with","condition":"K-tuned"}],"published_scope":"global","image":{"created_at":"2017-09-15T00:43:10-07:00","alt":"","width":270,"height":270,"src":"\/\/vexms.com\/cdn\/shop\/collections\/ktuned.jpg?v=1505461390"}},{"id":479434248,"handle":"traction-bar","title":"Traction Bar","updated_at":"2024-04-22T14:26:34-07:00","body_html":"","published_at":"2017-08-25T12:54:54-07:00","sort_order":"best-selling","template_suffix":"","disjunctive":false,"rules":[{"column":"title","relation":"contains","condition":"traction bar"}],"published_scope":"global","image":{"created_at":"2017-08-25T12:56:20-07:00","alt":"","width":1024,"height":768,"src":"\/\/vexms.com\/cdn\/shop\/collections\/tractionbar.jpg?v=1503690980"}}]
$314.99
$393.74
K-TUNED NO CUT K SWAP SHIFTER FOR 1988-2000 HONDA CIVIC & 90-01 ACURA INTEGRA
Application: EG/DC2/EK/EF/DA Note: This shifter is NOT recommended for race use. If...
Application: EG/DC2/EK/EF/DA Note: This shifter is NOT recommended for race use. If you plan on racing you car please look into the Billet RSX Shifter or Race-Spec Billet RSX Shifter. After a long wait we are happy to announce that the K-Tuned No-Cut K-Swap Shifter is now available. This shifter is designed to be used in all EF, DA, EG, DC2 and EK chassis and of course, as the title states, this unit installs with absolutely no cutting of the exhaust tunnel and allows you...
{"id":10592320584,"title":"K-TUNED NO CUT K SWAP SHIFTER FOR 1988-2000 HONDA CIVIC \u0026 90-01 ACURA INTEGRA","handle":"ktd-nc-sft","description":"\u003cbody\u003e \u003cp\u003e \u003cstrong\u003eApplication\u003c\/strong\u003e: EG\/DC2\/EK\/EF\/DA\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e This shifter is \u003cstrong\u003eNOT\u003c\/strong\u003e recommended for race use. If you plan on racing you car please look into the Billet RSX Shifter or Race-Spec Billet RSX Shifter.\u003cbr\u003e \u003cbr\u003e After a long wait we are happy to announce that the K-Tuned No-Cut K-Swap Shifter is now available. This shifter is designed to be used in all EF, DA, EG, DC2 and EK chassis and of course, as the title states, this unit installs with absolutely no cutting of the exhaust tunnel and allows you to keep your stock center console in place. It can be used with all OEM and aftermarket 02-04 RSX shifter cables. 05-06 RSX shifter cables will work with but with slight modification. Construction is 90% billet aluminum with mix of stainless steel, brass and delrin. All materials used were chosen to create a strong and reliable shifter with outstanding feel. The shifter has three pivot points that were made for long term wear. However, the shifter can be rebuilt easily with replacement bushings. There are 2 settings for the front to back throw that are easily made at the top section of the shifter. A progressive rate neutral return spring is used just like the ones that are used in the OEM design. To install the shifter on a manual transmission chassis use the OEM rear shifter holes and simply drill 2 more holes up front, thats it. The aluminum mechanism for the shifter will then bolt in place up top and the arms will pass down through the factory shifter hole. The bottom section where the cables are connected is fully sealed and 100% leak-free unlike some other designs where water and exhaust gases can actually get inside the shifter and the cabin. Our No-Cut Shifter was on the design table here at K-Tuned for almost 5 years. Despite making a handful of prototypes, most of them never met our high expectations. This part was challenging to make due to space constraints. Trying to fit a handful of moving parts in the confined space under the Honda center console without cutting anything was the first hurdle. The second and most important to us, was still keeping all those moving parts strong and reliable enough to avoid failures. We are very confident that our No-Cut Shifter is superior to our competitors short-term design.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2017-08-25T13:55:09-07:00","created_at":"2017-08-25T13:55:10-07:00","vendor":"VEX Motorsports","type":"Short Shifter","tags":["Acura","Honda"],"price":33299,"price_min":33299,"price_max":33299,"available":true,"price_varies":false,"compare_at_price":41624,"compare_at_price_min":41624,"compare_at_price_max":41624,"compare_at_price_varies":false,"variants":[{"id":44658115656,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ktdKTD-NC-SFT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-TUNED NO CUT K SWAP SHIFTER FOR 1988-2000 HONDA CIVIC \u0026 90-01 ACURA INTEGRA","public_title":null,"options":["Default Title"],"price":33299,"weight":2268,"compare_at_price":41624,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/ktd-nc-sft__1.jpg?v=1676673401"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/ktd-nc-sft__1.jpg?v=1676673401","options":["Title"],"media":[{"alt":null,"id":27909316673694,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/vexms.com\/cdn\/shop\/products\/ktd-nc-sft__1.jpg?v=1676673401"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/ktd-nc-sft__1.jpg?v=1676673401","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cp\u003e \u003cstrong\u003eApplication\u003c\/strong\u003e: EG\/DC2\/EK\/EF\/DA\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e This shifter is \u003cstrong\u003eNOT\u003c\/strong\u003e recommended for race use. If you plan on racing you car please look into the Billet RSX Shifter or Race-Spec Billet RSX Shifter.\u003cbr\u003e \u003cbr\u003e After a long wait we are happy to announce that the K-Tuned No-Cut K-Swap Shifter is now available. This shifter is designed to be used in all EF, DA, EG, DC2 and EK chassis and of course, as the title states, this unit installs with absolutely no cutting of the exhaust tunnel and allows you to keep your stock center console in place. It can be used with all OEM and aftermarket 02-04 RSX shifter cables. 05-06 RSX shifter cables will work with but with slight modification. Construction is 90% billet aluminum with mix of stainless steel, brass and delrin. All materials used were chosen to create a strong and reliable shifter with outstanding feel. The shifter has three pivot points that were made for long term wear. However, the shifter can be rebuilt easily with replacement bushings. There are 2 settings for the front to back throw that are easily made at the top section of the shifter. A progressive rate neutral return spring is used just like the ones that are used in the OEM design. To install the shifter on a manual transmission chassis use the OEM rear shifter holes and simply drill 2 more holes up front, thats it. The aluminum mechanism for the shifter will then bolt in place up top and the arms will pass down through the factory shifter hole. The bottom section where the cables are connected is fully sealed and 100% leak-free unlike some other designs where water and exhaust gases can actually get inside the shifter and the cabin. Our No-Cut Shifter was on the design table here at K-Tuned for almost 5 years. Despite making a handful of prototypes, most of them never met our high expectations. This part was challenging to make due to space constraints. Trying to fit a handful of moving parts in the confined space under the Honda center console without cutting anything was the first hurdle. The second and most important to us, was still keeping all those moving parts strong and reliable enough to avoid failures. We are very confident that our No-Cut Shifter is superior to our competitors short-term design.\u003c\/p\u003e \u003c\/body\u003e"} [{"id":481971336,"handle":"k-tuned-brand","title":"K-Tuned Brand","updated_at":"2023-03-21T12:55:22-07:00","body_html":"","published_at":"2017-09-15T00:42:50-07:00","sort_order":"best-selling","template_suffix":"","disjunctive":false,"rules":[{"column":"title","relation":"starts_with","condition":"K-tuned"}],"published_scope":"global","image":{"created_at":"2017-09-15T00:43:10-07:00","alt":"","width":270,"height":270,"src":"\/\/vexms.com\/cdn\/shop\/collections\/ktuned.jpg?v=1505461390"}},{"id":450802376,"handle":"shifter-kits","title":"Shifter Kits Interior","updated_at":"2024-04-24T10:13:38-07:00","body_html":"","published_at":"2017-07-22T00:16:42-07:00","sort_order":"best-selling","template_suffix":"","disjunctive":false,"rules":[{"column":"title","relation":"contains","condition":"shifter"}],"published_scope":"global"}]
$332.99
$416.24
K-TUNED FUEL FILTER 30 MICRON -6AN FITS HONDA CIVIC AND ACURA INTEGRA UNIVERSAL
K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves...
K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum. OEM shifter cables are made with rubber bushings at the cable ends, which can be responsible for “mushy” or “soft” feeling gear changes. This is because the rubber material can wear out and deteriorate over time. In some cases, f...
{"id":10592320264,"title":"K-TUNED FUEL FILTER 30 MICRON -6AN FITS HONDA CIVIC AND ACURA INTEGRA UNIVERSAL","handle":"ktd-ff-06","description":"\u003cbody\u003e \u003cdiv id=\"stcpDiv\" style=\"position: absolute; top: -1999px; left: -1988px;\"\u003e \u003cp\u003e K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum.\u003c\/p\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e OEM shifter cables are made with rubber bushings at the cable ends, which can be responsible for “mushy” or “soft” feeling gear changes. This is because the rubber material can wear out and deteriorate over time. In some cases, failure at these connections can even lead to transmission synchronizer and gear damage. We have even seen damaged shift selector parts on occasion.\u003c\/div\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e The unique dual O-ring design of these billet bushings allows for very slight flexibility at the joint which is critical for precise shifting. Without this movement, binding can occur. Both bushings are clear anodized to protect them from corrosion and we include all hardware needed for installation. With this kit, you’ll get 2 reusable “hairpin style” cotter pins for both cable end connections, and 2 bushing retaining clips.\u003c\/div\u003e - See more at: http:\/\/www.velocityshop.com\/product\/k-tuned-shifter-cable-bushings-07-11-civic-si_1912.html#sthash.YyeUnBCr.dpuf\u003c\/div\u003e \u003cdiv id=\"stcpDiv\" style=\"position: absolute; top: -1999px; left: -1988px;\"\u003e \u003cp\u003e K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum.\u003c\/p\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e OEM shifter cables are made with rubber bushings at the cable ends, which can be responsible for “mushy” or “soft” feeling gear changes. This is because the rubber material can wear out and deteriorate over time. In some cases, failure at these connections can even lead to transmission synchronizer and gear damage. We have even seen damaged shift selector parts on occasion.\u003c\/div\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e The unique dual O-ring design of these billet bushings allows for very slight flexibility at the joint which is critical for precise shifting. Without this movement, binding can occur. Both bushings are clear anodized to protect them from corrosion and we include all hardware needed for installation. With this kit, you’ll get 2 reusable “hairpin style” cotter pins for both cable end connections, and 2 bushing retaining clips.\u003c\/div\u003e - See more at: http:\/\/www.velocityshop.com\/product\/k-tuned-shifter-cable-bushings-07-11-civic-si_1912.html#sthash.YyeUnBCr.dpuf\u003cbr\u003e \u003cdiv id=\"stcpDiv\" style=\"position: absolute; top: -1999px; left: -1988px;\"\u003e \u003cp\u003e K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum.\u003c\/p\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e OEM shifter cables are made with rubber bushings at the cable ends, which can be responsible for “mushy” or “soft” feeling gear changes. This is because the rubber material can wear out and deteriorate over time. In some cases, failure at these connections can even lead to transmission synchronizer and gear damage. We have even seen damaged shift selector parts on occasion.\u003c\/div\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e The unique dual O-ring design of these billet bushings allows for very slight flexibility at the joint which is critical for precise shifting. Without this movement, binding can occur. Both bushings are clear anodized to protect them from corrosion and we include all hardware needed for installation. With this kit, you’ll get 2 reusable “hairpin style” cotter pins for both cable end connections, and 2 bushing retaining clips.\u003c\/div\u003e - See more at: http:\/\/www.velocityshop.com\/product\/k-tuned-shifter-cable-bushings-07-11-civic-si_1912.html#sthash.YyeUnBCr.dpuf\u003c\/div\u003e \u003c\/div\u003e \u003cdiv id=\"stcpDiv\" style=\"position: absolute; top: -1999px; left: -1988px;\"\u003e \u003cp\u003e K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum.\u003c\/p\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e OEM shifter cables are made with rubber bushings at the cable ends, which can be responsible for “mushy” or “soft” feeling gear changes. This is because the rubber material can wear out and deteriorate over time. In some cases, failure at these connections can even lead to transmission synchronizer and gear damage. We have even seen damaged shift selector parts on occasion.\u003c\/div\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e The unique dual O-ring design of these billet bushings allows for very slight flexibility at the joint which is critical for precise shifting. Without this movement, binding can occur. Both bushings are clear anodized to protect them from corrosion and we include all hardware needed for installation. With this kit, you’ll get 2 reusable “hairpin style” cotter pins for both cable end connections, and 2 bushing retaining clips.\u003c\/div\u003e - See more at: http:\/\/www.velocityshop.com\/product\/k-tuned-shifter-cable-bushings-07-11-civic-si_1912.html#sthash.YyeUnBCr.dpuf\u003c\/div\u003e \u003cdiv id=\"stcpDiv\" style=\"position: absolute; top: -1999px; left: -1988px;\"\u003e \u003cp\u003e K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum.\u003c\/p\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e OEM shifter cables are made with rubber bushings at the cable ends, which can be responsible for “mushy” or “soft” feeling gear changes. This is because the rubber material can wear out and deteriorate over time. In some cases, failure at these connections can even lead to transmission synchronizer and gear damage. We have even seen damaged shift selector parts on occasion.\u003c\/div\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e The unique dual O-ring design of these billet bushings allows for very slight flexibility at the joint which is critical for precise shifting. Without this movement, binding can occur. Both bushings are clear anodized to protect them from corrosion and we include all hardware needed for installation. With this kit, you’ll get 2 reusable “hairpin style” cotter pins for both cable end connections, and 2 bushing retaining clips.\u003c\/div\u003e - See more at: http:\/\/www.velocityshop.com\/product\/k-tuned-shifter-cable-bushings-07-11-civic-si_1912.html#sthash.YyeUnBCr.dpuf\u003c\/div\u003e \u003cdiv id=\"stcpDiv\" style=\"position: absolute; top: -1999px; left: -1988px;\"\u003e \u003cp\u003e K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum.\u003c\/p\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e OEM shifter cables are made with rubber bushings at the cable ends, which can be responsible for “mushy” or “soft” feeling gear changes. This is because the rubber material can wear out and deteriorate over time. In some cases, failure at these connections can even lead to transmission synchronizer and gear damage. We have even seen damaged shift selector parts on occasion.\u003c\/div\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e The unique dual O-ring design of these billet bushings allows for very slight flexibility at the joint which is critical for precise shifting. Without this movement, binding can occur. Both bushings are clear anodized to protect them from corrosion and we include all hardware needed for installation. With this kit, you’ll get 2 reusable “hairpin style” cotter pins for both cable end connections, and 2 bushing retaining clips.\u003c\/div\u003e - See more at: http:\/\/www.velocityshop.com\/product\/k-tuned-shifter-cable-bushings-07-11-civic-si_1912.html#sthash.YyeUnBCr.dpuf\u003c\/div\u003e \u003cp\u003e universal fitment\u003cbr\u003e \u003cbr\u003e Our 30 micron Inline fuel filter can be used universally. Can be disassembled for cleaning which is recommend every year depending on how much the car is driven.\u003c\/p\u003e \u003c\/body\u003e","published_at":"2017-08-25T13:55:07-07:00","created_at":"2017-08-25T13:55:08-07:00","vendor":"VEX Motorsports","type":"Fuel","tags":["Acura","Honda"],"price":3450,"price_min":3450,"price_max":3450,"available":true,"price_varies":false,"compare_at_price":4313,"compare_at_price_min":4313,"compare_at_price_max":4313,"compare_at_price_varies":false,"variants":[{"id":44658109512,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ktdKTD-FF-06","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-TUNED FUEL FILTER 30 MICRON -6AN FITS HONDA CIVIC AND ACURA INTEGRA UNIVERSAL","public_title":null,"options":["Default Title"],"price":3450,"weight":907,"compare_at_price":4313,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/ktuned_fuelfilter_01.jpg?v=1676671150"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/ktuned_fuelfilter_01.jpg?v=1676671150","options":["Title"],"media":[{"alt":null,"id":27909159649438,"position":1,"preview_image":{"aspect_ratio":1.677,"height":461,"width":773,"src":"\/\/vexms.com\/cdn\/shop\/products\/ktuned_fuelfilter_01.jpg?v=1676671150"},"aspect_ratio":1.677,"height":461,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/ktuned_fuelfilter_01.jpg?v=1676671150","width":773}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e \u003cdiv id=\"stcpDiv\" style=\"position: absolute; top: -1999px; left: -1988px;\"\u003e \u003cp\u003e K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum.\u003c\/p\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e OEM shifter cables are made with rubber bushings at the cable ends, which can be responsible for “mushy” or “soft” feeling gear changes. This is because the rubber material can wear out and deteriorate over time. In some cases, failure at these connections can even lead to transmission synchronizer and gear damage. We have even seen damaged shift selector parts on occasion.\u003c\/div\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e The unique dual O-ring design of these billet bushings allows for very slight flexibility at the joint which is critical for precise shifting. Without this movement, binding can occur. Both bushings are clear anodized to protect them from corrosion and we include all hardware needed for installation. With this kit, you’ll get 2 reusable “hairpin style” cotter pins for both cable end connections, and 2 bushing retaining clips.\u003c\/div\u003e - See more at: http:\/\/www.velocityshop.com\/product\/k-tuned-shifter-cable-bushings-07-11-civic-si_1912.html#sthash.YyeUnBCr.dpuf\u003c\/div\u003e \u003cdiv id=\"stcpDiv\" style=\"position: absolute; top: -1999px; left: -1988px;\"\u003e \u003cp\u003e K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum.\u003c\/p\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e OEM shifter cables are made with rubber bushings at the cable ends, which can be responsible for “mushy” or “soft” feeling gear changes. This is because the rubber material can wear out and deteriorate over time. In some cases, failure at these connections can even lead to transmission synchronizer and gear damage. We have even seen damaged shift selector parts on occasion.\u003c\/div\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e The unique dual O-ring design of these billet bushings allows for very slight flexibility at the joint which is critical for precise shifting. Without this movement, binding can occur. Both bushings are clear anodized to protect them from corrosion and we include all hardware needed for installation. With this kit, you’ll get 2 reusable “hairpin style” cotter pins for both cable end connections, and 2 bushing retaining clips.\u003c\/div\u003e - See more at: http:\/\/www.velocityshop.com\/product\/k-tuned-shifter-cable-bushings-07-11-civic-si_1912.html#sthash.YyeUnBCr.dpuf\u003cbr\u003e \u003cdiv id=\"stcpDiv\" style=\"position: absolute; top: -1999px; left: -1988px;\"\u003e \u003cp\u003e K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum.\u003c\/p\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e OEM shifter cables are made with rubber bushings at the cable ends, which can be responsible for “mushy” or “soft” feeling gear changes. This is because the rubber material can wear out and deteriorate over time. In some cases, failure at these connections can even lead to transmission synchronizer and gear damage. We have even seen damaged shift selector parts on occasion.\u003c\/div\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e The unique dual O-ring design of these billet bushings allows for very slight flexibility at the joint which is critical for precise shifting. Without this movement, binding can occur. Both bushings are clear anodized to protect them from corrosion and we include all hardware needed for installation. With this kit, you’ll get 2 reusable “hairpin style” cotter pins for both cable end connections, and 2 bushing retaining clips.\u003c\/div\u003e - See more at: http:\/\/www.velocityshop.com\/product\/k-tuned-shifter-cable-bushings-07-11-civic-si_1912.html#sthash.YyeUnBCr.dpuf\u003c\/div\u003e \u003c\/div\u003e \u003cdiv id=\"stcpDiv\" style=\"position: absolute; top: -1999px; left: -1988px;\"\u003e \u003cp\u003e K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum.\u003c\/p\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e OEM shifter cables are made with rubber bushings at the cable ends, which can be responsible for “mushy” or “soft” feeling gear changes. This is because the rubber material can wear out and deteriorate over time. In some cases, failure at these connections can even lead to transmission synchronizer and gear damage. We have even seen damaged shift selector parts on occasion.\u003c\/div\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e The unique dual O-ring design of these billet bushings allows for very slight flexibility at the joint which is critical for precise shifting. Without this movement, binding can occur. Both bushings are clear anodized to protect them from corrosion and we include all hardware needed for installation. With this kit, you’ll get 2 reusable “hairpin style” cotter pins for both cable end connections, and 2 bushing retaining clips.\u003c\/div\u003e - See more at: http:\/\/www.velocityshop.com\/product\/k-tuned-shifter-cable-bushings-07-11-civic-si_1912.html#sthash.YyeUnBCr.dpuf\u003c\/div\u003e \u003cdiv id=\"stcpDiv\" style=\"position: absolute; top: -1999px; left: -1988px;\"\u003e \u003cp\u003e K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum.\u003c\/p\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e OEM shifter cables are made with rubber bushings at the cable ends, which can be responsible for “mushy” or “soft” feeling gear changes. This is because the rubber material can wear out and deteriorate over time. In some cases, failure at these connections can even lead to transmission synchronizer and gear damage. We have even seen damaged shift selector parts on occasion.\u003c\/div\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e The unique dual O-ring design of these billet bushings allows for very slight flexibility at the joint which is critical for precise shifting. Without this movement, binding can occur. Both bushings are clear anodized to protect them from corrosion and we include all hardware needed for installation. With this kit, you’ll get 2 reusable “hairpin style” cotter pins for both cable end connections, and 2 bushing retaining clips.\u003c\/div\u003e - See more at: http:\/\/www.velocityshop.com\/product\/k-tuned-shifter-cable-bushings-07-11-civic-si_1912.html#sthash.YyeUnBCr.dpuf\u003c\/div\u003e \u003cdiv id=\"stcpDiv\" style=\"position: absolute; top: -1999px; left: -1988px;\"\u003e \u003cp\u003e K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum.\u003c\/p\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e OEM shifter cables are made with rubber bushings at the cable ends, which can be responsible for “mushy” or “soft” feeling gear changes. This is because the rubber material can wear out and deteriorate over time. In some cases, failure at these connections can even lead to transmission synchronizer and gear damage. We have even seen damaged shift selector parts on occasion.\u003c\/div\u003e \u003cdiv\u003e \u003c\/div\u003e \u003cdiv\u003e The unique dual O-ring design of these billet bushings allows for very slight flexibility at the joint which is critical for precise shifting. Without this movement, binding can occur. Both bushings are clear anodized to protect them from corrosion and we include all hardware needed for installation. With this kit, you’ll get 2 reusable “hairpin style” cotter pins for both cable end connections, and 2 bushing retaining clips.\u003c\/div\u003e - See more at: http:\/\/www.velocityshop.com\/product\/k-tuned-shifter-cable-bushings-07-11-civic-si_1912.html#sthash.YyeUnBCr.dpuf\u003c\/div\u003e \u003cp\u003e universal fitment\u003cbr\u003e \u003cbr\u003e Our 30 micron Inline fuel filter can be used universally. Can be disassembled for cleaning which is recommend every year depending on how much the car is driven.\u003c\/p\u003e \u003c\/body\u003e"} [{"id":480152392,"handle":"fuel","title":"Fuel","updated_at":"2024-05-03T06:24:01-07:00","body_html":"","published_at":"2017-08-29T15:10:18-07:00","sort_order":"best-selling","template_suffix":"test","disjunctive":true,"rules":[{"column":"title","relation":"contains","condition":"fuel"}],"published_scope":"global"},{"id":481971336,"handle":"k-tuned-brand","title":"K-Tuned Brand","updated_at":"2023-03-21T12:55:22-07:00","body_html":"","published_at":"2017-09-15T00:42:50-07:00","sort_order":"best-selling","template_suffix":"","disjunctive":false,"rules":[{"column":"title","relation":"starts_with","condition":"K-tuned"}],"published_scope":"global","image":{"created_at":"2017-09-15T00:43:10-07:00","alt":"","width":270,"height":270,"src":"\/\/vexms.com\/cdn\/shop\/collections\/ktuned.jpg?v=1505461390"}}]
$34.50
$43.13
K-TUNED BILLET SHIFTER CABLE FOR 02-06 ACURA RSX & 02-11 HONDA CIVIC SI
Application: RSX (All Models and Years), EP3 Civic, 2006-2011 Civic SI (K20Z3) ...
Application: RSX (All Models and Years), EP3 Civic, 2006-2011 Civic SI (K20Z3) with 2002-2006 RSX-S Shift Selector We have had the idea to make a nice replacement Shifter Cable Bracket for quite some time now. While we were developing our Billet RSX Shifter and our Race Shifter Cables, it made sense for us to work on a cable bracket at the same time. After testing a few prototypes of different materials, we couldnÍt get the bracket to look the way we wanted. In the...
{"id":10592290056,"title":"K-TUNED BILLET SHIFTER CABLE FOR 02-06 ACURA RSX \u0026 02-11 HONDA CIVIC SI","handle":"ktd-cab-bkt","description":"\u003cbody\u003e\n \u003cdiv class=\"r-tabs-panel r-tabs-state-active\" id=\"tab-1\" style=\"display: block;\"\u003e\n \u003cdiv class=\"item\" itemprop=\"description\"\u003e\n \u003cp class=\"p1\"\u003e\n \u003cspan style=\"font-weight: bold; \"\u003eApplication:\u003c\/span\u003e RSX (All Models and Years), EP3 Civic, 2006-2011 Civic SI (K20Z3) with 2002-2006 RSX-S Shift Selector\u003c\/p\u003e\n \u003cp class=\"p1\"\u003e\n We have had the idea to make a nice replacement Shifter Cable Bracket for quite some time now. While we were developing our Billet RSX Shifter and our Race Shifter Cables, it made sense for us to work on a cable bracket at the same time. After testing a few prototypes of different materials, we couldnÍt get the bracket to look the way we wanted. In the end, we decided to get it made with 6061 billet aluminum on the CNC machine. The bracket can be mounted on all RSX, EP3 and Civic SI transmissions. It is designed to be used with any oem or aftermarket 2002-2004 RSX-S shifter and cables. The bracket can even be used on the newer 2006-2011 Civic SI (K20Z3) 6 speed transmission as long as a 2002-2006 RSX-S shift selector is also being used. Included with the bracket is 3 spacers needed for some of the different transmission options and 3 mounting bolts. Now you can replace the rusted out factory bracket with a nice anodized billet bracket that will last.\u003c\/p\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e\n \u003c\/body\u003e","published_at":"2017-08-25T13:45:59-07:00","created_at":"2017-08-25T13:46:01-07:00","vendor":"VEX Motorsports","type":"Short Shifter","tags":["Acura","Honda"],"price":8499,"price_min":8499,"price_max":8499,"available":true,"price_varies":false,"compare_at_price":10624,"compare_at_price_min":10624,"compare_at_price_max":10624,"compare_at_price_varies":false,"variants":[{"id":44657563848,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ktdKTD-CAB-BKT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"K-TUNED BILLET SHIFTER CABLE FOR 02-06 ACURA RSX \u0026 02-11 HONDA CIVIC SI","public_title":null,"options":["Default Title"],"price":8499,"weight":2268,"compare_at_price":10624,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/ktd-cab-bkt.jpg?v=1676681050"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/ktd-cab-bkt.jpg?v=1676681050","options":["Title"],"media":[{"alt":null,"id":27909735284894,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/vexms.com\/cdn\/shop\/products\/ktd-cab-bkt.jpg?v=1676681050"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/ktd-cab-bkt.jpg?v=1676681050","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbody\u003e\n \u003cdiv class=\"r-tabs-panel r-tabs-state-active\" id=\"tab-1\" style=\"display: block;\"\u003e\n \u003cdiv class=\"item\" itemprop=\"description\"\u003e\n \u003cp class=\"p1\"\u003e\n \u003cspan style=\"font-weight: bold; \"\u003eApplication:\u003c\/span\u003e RSX (All Models and Years), EP3 Civic, 2006-2011 Civic SI (K20Z3) with 2002-2006 RSX-S Shift Selector\u003c\/p\u003e\n \u003cp class=\"p1\"\u003e\n We have had the idea to make a nice replacement Shifter Cable Bracket for quite some time now. While we were developing our Billet RSX Shifter and our Race Shifter Cables, it made sense for us to work on a cable bracket at the same time. After testing a few prototypes of different materials, we couldnÍt get the bracket to look the way we wanted. In the end, we decided to get it made with 6061 billet aluminum on the CNC machine. The bracket can be mounted on all RSX, EP3 and Civic SI transmissions. It is designed to be used with any oem or aftermarket 2002-2004 RSX-S shifter and cables. The bracket can even be used on the newer 2006-2011 Civic SI (K20Z3) 6 speed transmission as long as a 2002-2006 RSX-S shift selector is also being used. Included with the bracket is 3 spacers needed for some of the different transmission options and 3 mounting bolts. Now you can replace the rusted out factory bracket with a nice anodized billet bracket that will last.\u003c\/p\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e\n \u003c\/body\u003e"} [{"id":481971336,"handle":"k-tuned-brand","title":"K-Tuned Brand","updated_at":"2023-03-21T12:55:22-07:00","body_html":"","published_at":"2017-09-15T00:42:50-07:00","sort_order":"best-selling","template_suffix":"","disjunctive":false,"rules":[{"column":"title","relation":"starts_with","condition":"K-tuned"}],"published_scope":"global","image":{"created_at":"2017-09-15T00:43:10-07:00","alt":"","width":270,"height":270,"src":"\/\/vexms.com\/cdn\/shop\/collections\/ktuned.jpg?v=1505461390"}},{"id":450802376,"handle":"shifter-kits","title":"Shifter Kits Interior","updated_at":"2024-04-24T10:13:38-07:00","body_html":"","published_at":"2017-07-22T00:16:42-07:00","sort_order":"best-selling","template_suffix":"","disjunctive":false,"rules":[{"column":"title","relation":"contains","condition":"shifter"}],"published_scope":"global"}]
$84.99
$106.24