DRIVESHAFT SHOP RIGHT 500HP LEVEL 2.9 V2 AXLE FOR 00-08 HONDA S2000 RA2001X2-V2
THIS IS FOR A SINGLE AXLE New S2000 500HP Level 2.9 Axles. We here at The Driveshaft Shop a...
THIS IS FOR A SINGLE AXLE New S2000 500HP Level 2.9 Axles. We here at The Driveshaft Shop are always looking to improve our axles and shafts. Over the years the inner CV on the S2000 has been an problem with the stock axles. The factory tripod bearing just isn't up to the task and will wear into the inner CV housing. The tripod has only 3 points in where it makes contact and will dig right into the housing causing the part to wear, creating noise, vibration and eventually failure. We ha...
DRIVESHAFT SHOP REAR AXLE/HUB KIT FOR 01-07 EVO MI49
THIS IS FOR A SINGLE AXLE This is our re-designed Level 5 system for the Evolution VII / VI...
THIS IS FOR A SINGLE AXLE This is our re-designed Level 5 system for the Evolution VII / VIII / IX platform. This system has been tested by the best and can be found in some of the fastest cars in the world. We increased the spline count on the axle bar from 30 to 32 spline and made it from an aerospace grade material, we made the outer CV considerably larger, and were also able to include the ABS rings. We also supply outer hubs and wheel bearings to accomodate the larger outer spline ...
DRIVESHAFT SHOP REAR AXLE/DIFF STUB KIT FOR 08-14 NISSAN GTR
THIS IS FOR A SINGLE AXLE ///// Now with stronger outer CV using 108mm CV with 2-piece bolt...
THIS IS FOR A SINGLE AXLE ///// Now with stronger outer CV using 108mm CV with 2-piece bolt-on outer stub\\\\\ The GT-R Pro-Level Axle Kit feature a direct fit outer CV made from a high grade proprietary material, Porsche style 108mm CV's on both ends but we have upgraded them to use our signature 30 spline bars with billet 4340 cages, our aerospace quality torsional center bars that twist significantly more than a factory unit, allowing them to absorb a great deal of the shock p...
DRIVESHAFT SHOP REAR AXLE STUBS FOR R35 NISSAN GTR
THIS IS FOR A SINGLE AXLE When the R35 first came out we rushed and made axles right away, ...
THIS IS FOR A SINGLE AXLE When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have b...
DRIVESHAFT SHOP REAR AXLE OUTER CV DIFF & 30 SPLINE BARS FOR 95-99 ECLIPSE MI-OUTER-1
THIS IS FOR A SINGLE AXLE So the cars getting old and the outer CV is now stuck in the hub ...
THIS IS FOR A SINGLE AXLE So the cars getting old and the outer CV is now stuck in the hub ? This is an outer CV (1) including boots clamps and grease, This is designed for the Stock axles that have the NTN stamp on them along the large boot surface of the CV. Most will be like this We need to know if its a LSD or an open Diff or not this is where it gets tricky, every LSD diff axle we have seen have 30 internal splines (This is the spline inside the boot) . The open ones we have...
DRIVESHAFT SHOP REAR AXLE BAR/OUTER CV UPGRADE FOR 95-99 ECLIPSE GSX
THIS IS FOR A SINGLE AXLE 95-99 Eclipse GSX / Talon TSi AWD 650HP Rear Bar / Outer Upgrade ...
THIS IS FOR A SINGLE AXLE 95-99 Eclipse GSX / Talon TSi AWD 650HP Rear Bar / Outer Upgrade (LSD rear only). This kit includes 2 Axle bars, outer CV's and boots, clamps and grease to install the factory inner CV from your stock axles. Price listed is for both axles. Please note: This rear axle upgrade is for the LSD rear only, the non-LSD rear axles use different splines and are not compatible with this upgrade. Part Number: MIR3
DRIVESHAFT SHOP REAR AXLE BAR/INNER CV UPGRADE FOR 86-92 RX7 MZIN-1
THIS IS FOR A SINGLE AXLE Introducing the new Axle Bar / Inner CV and Outer Race Upgrade fo...
THIS IS FOR A SINGLE AXLE Introducing the new Axle Bar / Inner CV and Outer Race Upgrade for the 86-92 Mazda RX-7 Turbo II. This upgrade includes high grade aircraft quality axle bars, new porsche-style 108mm inner CV's with bolt-on flanges and inner stubs into the differential. We also include chromoly outer CV races to convert your factory outer CV from 26 spline internal to 36 spline to fit our larger axle bars. You must reuse your factory outer CV with this upgrade. Rated to 800HP w...
DRIVESHAFT SHOP REAR AXLE BAR UPGRADE FOR 2004 WRX SBR1
THIS IS FOR A SINGLE AXLE Subaru 2004 WRX STi Rear Axle Bar Upgrade. The STi is a very stou...
THIS IS FOR A SINGLE AXLE Subaru 2004 WRX STi Rear Axle Bar Upgrade. The STi is a very stout car from the factory, the inner and outer CV's are made from a Japanese spec material very close to our 4130 chromoly, but the center bars are made from a brittle lower grade material. What we have made is a custom set of aerospace grade center bars that will fit your stock inner and outer CV. This kit comes with both axle bars, boots, clamps and grease. Please Note: This axle bar upgrade...