My account

Driveshaft Shop Brand

Sort products:

Show:

DRIVESHAFT SHOP STEEL DRIVESHAFT FOR 5SPD 95-98 240SX W/O ABS NISH2-S

S14 Non-ABS with KA24/SR20 5-Speed Steel Shaft. This is our steel 1-piece replacement shaft f...

S14 Non-ABS with KA24/SR20 5-Speed Steel Shaft. This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the fact the hanger bearing is not moving up and down during acceleration. A less expensive alternative to our aluminum shaft, it has been suggested by a few of the drift cars that we sponsor the steel shaft breaks the tires loose quicker than the aluminum. This stee...

{"id":10514735688,"title":"DRIVESHAFT SHOP STEEL DRIVESHAFT FOR 5SPD 95-98 240SX W\/O ABS NISH2-S","handle":"nish2-s","description":"\u003cp\u003e\n S14 Non-ABS with KA24\/SR20 5-Speed Steel Shaft. This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the fact the hanger bearing is not moving up and down during acceleration. A less expensive alternative to our aluminum shaft, it has been suggested by a few of the drift cars that we sponsor the steel shaft breaks the tires loose quicker than the aluminum. This steel shaft will give you most of the benefits of the aluminum shaft, without the cost.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: Whether or not the car was equipped with ABS from the factory will change the length of the driveshaft. Be sure to check vehicle before ordering.\u003c\/p\u003e","published_at":"2017-08-16T01:52:29-07:00","created_at":"2017-08-16T01:52:29-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Nissan"],"price":59848,"price_min":59848,"price_max":59848,"available":true,"price_varies":false,"compare_at_price":59848,"compare_at_price_min":59848,"compare_at_price_max":59848,"compare_at_price_varies":false,"variants":[{"id":43740143432,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssNISH2-S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP STEEL DRIVESHAFT FOR 5SPD 95-98 240SX W\/O ABS NISH2-S","public_title":null,"options":["Default Title"],"price":59848,"weight":8391,"compare_at_price":59848,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1_d1f13c83-1947-45ca-a672-19a84657b13f.gif?v=1632077528"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1_d1f13c83-1947-45ca-a672-19a84657b13f.gif?v=1632077528","options":["Title"],"media":[{"alt":null,"id":23107098706078,"position":1,"preview_image":{"aspect_ratio":1.704,"height":338,"width":576,"src":"\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1_d1f13c83-1947-45ca-a672-19a84657b13f.gif?v=1632077528"},"aspect_ratio":1.704,"height":338,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1_d1f13c83-1947-45ca-a672-19a84657b13f.gif?v=1632077528","width":576}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\n S14 Non-ABS with KA24\/SR20 5-Speed Steel Shaft. This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the fact the hanger bearing is not moving up and down during acceleration. A less expensive alternative to our aluminum shaft, it has been suggested by a few of the drift cars that we sponsor the steel shaft breaks the tires loose quicker than the aluminum. This steel shaft will give you most of the benefits of the aluminum shaft, without the cost.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: Whether or not the car was equipped with ABS from the factory will change the length of the driveshaft. Be sure to check vehicle before ordering.\u003c\/p\u003e"}

$598.48

DRIVESHAFT SHOP STEEL DRIVESHAFT FOR 5SPD 95-98 240SX W/ABS NISH4-S

S14 ABS with KA24/SR20 5-Speed Steel Driveshaft. This is our steel 1-piece replacement shaft ...

S14 ABS with KA24/SR20 5-Speed Steel Driveshaft. This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the fact the hanger bearing is not moving up and down during acceleration. A less expensive alternative to our aluminum shaft, it has been suggested by a few of the drift cars that we sponsor the steel shaft breaks the tires loose quicker than the aluminum. This ste...

{"id":10514735560,"title":"DRIVESHAFT SHOP STEEL DRIVESHAFT FOR 5SPD 95-98 240SX W\/ABS NISH4-S","handle":"nish4-s","description":"\u003cdiv class=\"std\"\u003e\n S14 ABS with KA24\/SR20 5-Speed Steel Driveshaft. This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the fact the hanger bearing is not moving up and down during acceleration. A less expensive alternative to our aluminum shaft, it has been suggested by a few of the drift cars that we sponsor the steel shaft breaks the tires loose quicker than the aluminum. This steel shaft will give you most of the benefits of the aluminum shaft, without the cost.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: Whether or not the car was equipped with ABS from the factory will change the length of the driveshaft. Be sure to check vehicle before ordering.\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eNISH4-S\u003c\/span\u003e\n\u003c\/h4\u003e","published_at":"2017-08-16T01:52:28-07:00","created_at":"2017-08-16T01:52:28-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Nissan"],"price":59848,"price_min":59848,"price_max":59848,"available":true,"price_varies":false,"compare_at_price":59848,"compare_at_price_min":59848,"compare_at_price_max":59848,"compare_at_price_varies":false,"variants":[{"id":43740142856,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssNISH4-S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP STEEL DRIVESHAFT FOR 5SPD 95-98 240SX W\/ABS NISH4-S","public_title":null,"options":["Default Title"],"price":59848,"weight":9072,"compare_at_price":59848,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1_6bf0de19-ee24-4548-8c3c-c2ddb8bf9859.gif?v=1676018697"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1_6bf0de19-ee24-4548-8c3c-c2ddb8bf9859.gif?v=1676018697","options":["Title"],"media":[{"alt":null,"id":27860942684318,"position":1,"preview_image":{"aspect_ratio":1.704,"height":338,"width":576,"src":"\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1_6bf0de19-ee24-4548-8c3c-c2ddb8bf9859.gif?v=1676018697"},"aspect_ratio":1.704,"height":338,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1_6bf0de19-ee24-4548-8c3c-c2ddb8bf9859.gif?v=1676018697","width":576}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"std\"\u003e\n S14 ABS with KA24\/SR20 5-Speed Steel Driveshaft. This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the fact the hanger bearing is not moving up and down during acceleration. A less expensive alternative to our aluminum shaft, it has been suggested by a few of the drift cars that we sponsor the steel shaft breaks the tires loose quicker than the aluminum. This steel shaft will give you most of the benefits of the aluminum shaft, without the cost.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: Whether or not the car was equipped with ABS from the factory will change the length of the driveshaft. Be sure to check vehicle before ordering.\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eNISH4-S\u003c\/span\u003e\n\u003c\/h4\u003e"}

$598.48

DRIVESHAFT SHOP STEEL DRIVESHAFT FOR 5SPD 89-94 240SX W/O ABS NISH1-S

S13 Non-ABS with KA24 / SR20 (5-Speed) Steel driveshaft. This is our steel 1-piece replacemen...

S13 Non-ABS with KA24 / SR20 (5-Speed) Steel driveshaft. This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the fact the hanger bearing is not moving up and down during acceleration. A less expensive alternative to our aluminum shaft, it has been suggested by a few of the drift cars that we sponsor the steel shaft breaks the tires loose quicker than the aluminum. ...

{"id":10514735368,"title":"DRIVESHAFT SHOP STEEL DRIVESHAFT FOR 5SPD 89-94 240SX W\/O ABS NISH1-S","handle":"nish1-s","description":"\u003cdiv class=\"std\"\u003e\n S13 Non-ABS with KA24 \/ SR20 (5-Speed) Steel driveshaft. This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the fact the hanger bearing is not moving up and down during acceleration. A less expensive alternative to our aluminum shaft, it has been suggested by a few of the drift cars that we sponsor the steel shaft breaks the tires loose quicker than the aluminum. This steel shaft will give you most of the benefits of the aluminum shaft, without the cost.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: Whether or not the car was equipped with ABS from the factory will change the length of the driveshaft. Be sure to check vehicle before ordering.\u003c\/div\u003e","published_at":"2017-08-16T01:52:27-07:00","created_at":"2017-08-16T01:52:27-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Nissan"],"price":59848,"price_min":59848,"price_max":59848,"available":true,"price_varies":false,"compare_at_price":59848,"compare_at_price_min":59848,"compare_at_price_max":59848,"compare_at_price_varies":false,"variants":[{"id":43740140616,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssNISH1-S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP STEEL DRIVESHAFT FOR 5SPD 89-94 240SX W\/O ABS NISH1-S","public_title":null,"options":["Default Title"],"price":59848,"weight":8165,"compare_at_price":59848,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1_3b8de8c1-56dd-48e7-9def-dfacd71fd636.gif?v=1632070244"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1_3b8de8c1-56dd-48e7-9def-dfacd71fd636.gif?v=1632070244","options":["Title"],"media":[{"alt":null,"id":23105969324190,"position":1,"preview_image":{"aspect_ratio":1.704,"height":338,"width":576,"src":"\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1_3b8de8c1-56dd-48e7-9def-dfacd71fd636.gif?v=1632070244"},"aspect_ratio":1.704,"height":338,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1_3b8de8c1-56dd-48e7-9def-dfacd71fd636.gif?v=1632070244","width":576}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"std\"\u003e\n S13 Non-ABS with KA24 \/ SR20 (5-Speed) Steel driveshaft. This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the fact the hanger bearing is not moving up and down during acceleration. A less expensive alternative to our aluminum shaft, it has been suggested by a few of the drift cars that we sponsor the steel shaft breaks the tires loose quicker than the aluminum. This steel shaft will give you most of the benefits of the aluminum shaft, without the cost.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: Whether or not the car was equipped with ABS from the factory will change the length of the driveshaft. Be sure to check vehicle before ordering.\u003c\/div\u003e"}

$598.48

DRIVESHAFT SHOP STEEL DRIVESHAFT FOR 5SPD 89-94 240SX W/ABS NISH3-S

S13 KA24/SR20 5-Speed with ABS Aluminum Driveshaft. This is our steel 1-piece replacement sha...

S13 KA24/SR20 5-Speed with ABS Aluminum Driveshaft. This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the fact the hanger bearing is not moving up and down during acceleration. A less expensive alternative to our aluminum shaft, it has been suggested by a few of the drift cars that we sponsor the steel shaft breaks the tires loose quicker than the aluminum. This ...

{"id":10514735240,"title":"DRIVESHAFT SHOP STEEL DRIVESHAFT FOR 5SPD 89-94 240SX W\/ABS NISH3-S","handle":"nish3-s","description":"\u003cdiv class=\"std\"\u003e\n S13 KA24\/SR20 5-Speed with ABS Aluminum Driveshaft. This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the fact the hanger bearing is not moving up and down during acceleration. A less expensive alternative to our aluminum shaft, it has been suggested by a few of the drift cars that we sponsor the steel shaft breaks the tires loose quicker than the aluminum. This steel shaft will give you most of the benefits of the aluminum shaft, without the cost. Available for most popular motor\/trans combinations, if you don’t see yours listed, custom shafts are also available.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: Whether or not the car was equipped with ABS from the factory will change the length of the driveshaft. Be sure to check vehicle before ordering.\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eNISH3-S\u003c\/span\u003e\n\u003c\/h4\u003e","published_at":"2017-08-16T01:52:26-07:00","created_at":"2017-08-16T01:52:26-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Nissan"],"price":59848,"price_min":59848,"price_max":59848,"available":true,"price_varies":false,"compare_at_price":59848,"compare_at_price_min":59848,"compare_at_price_max":59848,"compare_at_price_varies":false,"variants":[{"id":43740136200,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssNISH3-S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP STEEL DRIVESHAFT FOR 5SPD 89-94 240SX W\/ABS NISH3-S","public_title":null,"options":["Default Title"],"price":59848,"weight":8074,"compare_at_price":59848,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1.gif?v=1632077567"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1.gif?v=1632077567","options":["Title"],"media":[{"alt":null,"id":23107108765854,"position":1,"preview_image":{"aspect_ratio":1.704,"height":338,"width":576,"src":"\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1.gif?v=1632077567"},"aspect_ratio":1.704,"height":338,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/nish1_s_2_1.gif?v=1632077567","width":576}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"std\"\u003e\n S13 KA24\/SR20 5-Speed with ABS Aluminum Driveshaft. This is our steel 1-piece replacement shaft for the 240SX platform. This shaft is about 5lb less than the factory 2-piece and will give the car a faster throttle response due to the fact the hanger bearing is not moving up and down during acceleration. A less expensive alternative to our aluminum shaft, it has been suggested by a few of the drift cars that we sponsor the steel shaft breaks the tires loose quicker than the aluminum. This steel shaft will give you most of the benefits of the aluminum shaft, without the cost. Available for most popular motor\/trans combinations, if you don’t see yours listed, custom shafts are also available.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: Whether or not the car was equipped with ABS from the factory will change the length of the driveshaft. Be sure to check vehicle before ordering.\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eNISH3-S\u003c\/span\u003e\n\u003c\/h4\u003e"}

$598.48

DRIVESHAFT SHOP SINGLE RIGHT REAR AXLE STUBS FOR NISSAN GTR R35 108-NI-I-GTRR

THIS IS FOR A SINGLE AXLE When the R35 first came out we rushed and made axles right away, ...

THIS IS FOR A SINGLE AXLE When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have b...

{"id":10514742664,"title":"DRIVESHAFT SHOP SINGLE RIGHT REAR AXLE STUBS FOR NISSAN GTR R35 108-NI-I-GTRR","handle":"108-ni-i-gtrr","description":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have been using from Sweden) along with the billet 4340 housings will handle anything you want to put into them (these will not work with the stock axles).\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Please Note: Stubs will not fit the stock axles, only the Driveshaft Shop Pro-Level kit (NI66 and NI68)\u003c\/p\u003e","published_at":"2017-08-16T01:53:00-07:00","created_at":"2017-08-16T01:53:03-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Nissan"],"price":29999,"price_min":29999,"price_max":29999,"available":true,"price_varies":false,"compare_at_price":34000,"compare_at_price_min":34000,"compare_at_price_max":34000,"compare_at_price_varies":false,"variants":[{"id":43740184264,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dss108-NI-I-GTRR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP SINGLE RIGHT REAR AXLE STUBS FOR NISSAN GTR R35 108-NI-I-GTRR","public_title":null,"options":["Default Title"],"price":29999,"weight":18,"compare_at_price":34000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2_4095e124-c8d1-4876-9090-0754530fd05f.jpg?v=1676452168"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2_4095e124-c8d1-4876-9090-0754530fd05f.jpg?v=1676452168","options":["Title"],"media":[{"alt":null,"id":27890067538078,"position":1,"preview_image":{"aspect_ratio":0.985,"height":2133,"width":2100,"src":"\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2_4095e124-c8d1-4876-9090-0754530fd05f.jpg?v=1676452168"},"aspect_ratio":0.985,"height":2133,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2_4095e124-c8d1-4876-9090-0754530fd05f.jpg?v=1676452168","width":2100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have been using from Sweden) along with the billet 4340 housings will handle anything you want to put into them (these will not work with the stock axles).\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Please Note: Stubs will not fit the stock axles, only the Driveshaft Shop Pro-Level kit (NI66 and NI68)\u003c\/p\u003e"}

$299.99 $340.00

DRIVESHAFT SHOP SINGLE LEFT REAR AXLE STUBS FOR NISSAN GTR R35 108-NI-I-GTRL

THIS IS FOR A SINGLE AXLE When the R35 first came out we rushed and made axles right away, ...

{"id":10514742280,"title":"DRIVESHAFT SHOP SINGLE LEFT REAR AXLE STUBS FOR NISSAN GTR R35 108-NI-I-GTRL","handle":"108-ni-i-gtrl","description":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have been using from Sweden) along with the billet 4340 housings will handle anything you want to put into them (these will not work with the stock axles).\u003c\/p\u003e\n \u003cp\u003e\n \u003c\/p\u003e\n \u003cp\u003e\n Please Note: Stubs will not fit the stock axles, only the Driveshaft Shop Pro-Level kit (NI66 and NI68)\u003c\/p\u003e","published_at":"2017-08-16T01:52:57-07:00","created_at":"2017-08-16T01:53:00-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Nissan"],"price":33243,"price_min":33243,"price_max":33243,"available":true,"price_varies":false,"compare_at_price":31499,"compare_at_price_min":31499,"compare_at_price_max":31499,"compare_at_price_varies":false,"variants":[{"id":43740181128,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dss108-NI-I-GTRL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP SINGLE LEFT REAR AXLE STUBS FOR NISSAN GTR R35 108-NI-I-GTRL","public_title":null,"options":["Default Title"],"price":33243,"weight":6668,"compare_at_price":31499,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2.jpg?v=1676452146"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2.jpg?v=1676452146","options":["Title"],"media":[{"alt":null,"id":27890066129054,"position":1,"preview_image":{"aspect_ratio":0.985,"height":2133,"width":2100,"src":"\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2.jpg?v=1676452146"},"aspect_ratio":0.985,"height":2133,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2.jpg?v=1676452146","width":2100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have been using from Sweden) along with the billet 4340 housings will handle anything you want to put into them (these will not work with the stock axles).\u003c\/p\u003e\n \u003cp\u003e\n \u003c\/p\u003e\n \u003cp\u003e\n Please Note: Stubs will not fit the stock axles, only the Driveshaft Shop Pro-Level kit (NI66 and NI68)\u003c\/p\u003e"}

$332.43

DRIVESHAFT SHOP REAR AXLE/DIFF STUB KIT FOR 08-14 NISSAN GTR

THIS IS FOR A SINGLE AXLE ///// Now with stronger outer CV using 108mm CV with 2-piece bolt...

THIS IS FOR A SINGLE AXLE ///// Now with stronger outer CV using 108mm CV with 2-piece bolt-on outer stub\\\\\ The GT-R Pro-Level Axle Kit feature a direct fit outer CV made from a high grade proprietary material, Porsche style 108mm CV's on both ends but we have upgraded them to use our signature 30 spline bars with billet 4340 cages, our aerospace quality torsional center bars that twist significantly more than a factory unit, allowing them to absorb a great deal of the shock p...

{"id":10514752584,"title":"DRIVESHAFT SHOP REAR AXLE\/DIFF STUB KIT FOR 08-14 NISSAN GTR","handle":"ni68","description":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n \/\/\/\/\/ Now with stronger outer CV using 108mm CV with 2-piece bolt-on outer stub\\\\\\\\\\\u003cbr\u003e\n \u003cbr\u003e\n The GT-R Pro-Level Axle Kit feature a direct fit outer CV made from a high grade proprietary material, Porsche style 108mm CV's on both ends but we have upgraded them to use our signature 30 spline bars with billet 4340 cages, our aerospace quality torsional center bars that twist significantly more than a factory unit, allowing them to absorb a great deal of the shock produced by high horsepower applications. The axle kit also includes our 300M differential stub flange upgrade with all necessary hardware to mount them. Price listed is for both axles.\u003c\/p\u003e","published_at":"2017-08-16T01:54:04-07:00","created_at":"2017-08-16T01:54:05-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Nissan"],"price":259999,"price_min":259999,"price_max":259999,"available":true,"price_varies":false,"compare_at_price":259999,"compare_at_price_min":259999,"compare_at_price_max":259999,"compare_at_price_varies":false,"variants":[{"id":43740262280,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssNI68","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP REAR AXLE\/DIFF STUB KIT FOR 08-14 NISSAN GTR","public_title":null,"options":["Default Title"],"price":259999,"weight":59,"compare_at_price":259999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/mif1_8_1_8d5e979f-80f5-49eb-ad77-d19102977bfb.gif?v=1676665429"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/mif1_8_1_8d5e979f-80f5-49eb-ad77-d19102977bfb.gif?v=1676665429","options":["Title"],"media":[{"alt":null,"id":27908797857950,"position":1,"preview_image":{"aspect_ratio":1.171,"height":246,"width":288,"src":"\/\/vexms.com\/cdn\/shop\/products\/mif1_8_1_8d5e979f-80f5-49eb-ad77-d19102977bfb.gif?v=1676665429"},"aspect_ratio":1.171,"height":246,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/mif1_8_1_8d5e979f-80f5-49eb-ad77-d19102977bfb.gif?v=1676665429","width":288}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n \/\/\/\/\/ Now with stronger outer CV using 108mm CV with 2-piece bolt-on outer stub\\\\\\\\\\\u003cbr\u003e\n \u003cbr\u003e\n The GT-R Pro-Level Axle Kit feature a direct fit outer CV made from a high grade proprietary material, Porsche style 108mm CV's on both ends but we have upgraded them to use our signature 30 spline bars with billet 4340 cages, our aerospace quality torsional center bars that twist significantly more than a factory unit, allowing them to absorb a great deal of the shock produced by high horsepower applications. The axle kit also includes our 300M differential stub flange upgrade with all necessary hardware to mount them. Price listed is for both axles.\u003c\/p\u003e"}

$2,599.99

DRIVESHAFT SHOP REAR AXLE STUBS FOR R35 NISSAN GTR

THIS IS FOR A SINGLE AXLE When the R35 first came out we rushed and made axles right away, ...

{"id":10514752456,"title":"DRIVESHAFT SHOP REAR AXLE STUBS FOR R35 NISSAN GTR","handle":"ni66","description":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cdiv class=\"std\"\u003e\n When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have been using from Sweden) along with the billet 4340 housings will handle anything you want to put into them (these will not work with the stock axles).\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Please Note: Stubs will not fit the stock axles, only the Driveshaft Shop Pro-Level kit (NI66 and NI68)\u003c\/div\u003e","published_at":"2017-08-16T01:54:03-07:00","created_at":"2017-08-16T01:54:03-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Nissan"],"price":219999,"price_min":219999,"price_max":219999,"available":true,"price_varies":false,"compare_at_price":219999,"compare_at_price_min":219999,"compare_at_price_max":219999,"compare_at_price_varies":false,"variants":[{"id":43740262088,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssNI66","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP REAR AXLE STUBS FOR R35 NISSAN GTR","public_title":null,"options":["Default Title"],"price":219999,"weight":68,"compare_at_price":219999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/mif1_8_1_57e8e230-42f1-40cc-9003-82421294286f.gif?v=1676665334"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/mif1_8_1_57e8e230-42f1-40cc-9003-82421294286f.gif?v=1676665334","options":["Title"],"media":[{"alt":null,"id":27908789239966,"position":1,"preview_image":{"aspect_ratio":1.171,"height":246,"width":288,"src":"\/\/vexms.com\/cdn\/shop\/products\/mif1_8_1_57e8e230-42f1-40cc-9003-82421294286f.gif?v=1676665334"},"aspect_ratio":1.171,"height":246,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/mif1_8_1_57e8e230-42f1-40cc-9003-82421294286f.gif?v=1676665334","width":288}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cdiv class=\"std\"\u003e\n When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have been using from Sweden) along with the billet 4340 housings will handle anything you want to put into them (these will not work with the stock axles).\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Please Note: Stubs will not fit the stock axles, only the Driveshaft Shop Pro-Level kit (NI66 and NI68)\u003c\/div\u003e"}

$2,199.99

1 – 8 product(s) of 12