Axles & Driveshafts

Sort products:

Show:

DRIVESHAFT SHOP BASIC LEVEL LEFT AXLE FOR 94-01 INTEGRA RA3995L0

THIS IS FOR A SINGLE AXLEDRIVESHAFT SHOP BASIC LEVEL LEFT AXLE FOR 94-01 INTEGRA

$334.57

DRIVESHAFT SHOP BASIC LEVEL LEFT AXLE FOR 90-93 INTEGRA RA3999L0

THIS IS FOR A SINGLE AXLEDRIVESHAFT SHOP BASIC LEVEL LEFT AXLE FOR 90-93 INTEGRA

$334.57

DRIVESHAFT SHOP BASIC LEVEL LEFT AXLE FOR 02-05 CIVIC SI RA4005L0

THIS IS FOR A SINGLE AXLEDRIVESHAFT SHOP BASIC LEVEL LEFT AXLE FOR 02-05 CIVIC SI

$334.57

DRIVESHAFT SHOP CONVERSION PLATE FOR 04-11 GTO/G8/CAMARO/CTS-V GTOPL-2

THIS IS FOR A SINGLE AXLEDRIVESHAFT SHOP CONVERSION PLATE FOR 04-11 GTO/G8/CAMARO/CTS-V

$196.08

DRIVESHAFT SHOP ALUMINUM DRIVESHAFT FOR 5SPD 89-94 240SX W/O ABS NISH1

S13 Non-ABS with KA24/SR20 5-Speed Aluminum driveshaft. This is our single shaft conversion f...

S13 Non-ABS with KA24/SR20 5-Speed Aluminum driveshaft. This is our single shaft conversion for the 240SX platform. This is a complete 6061-T6 aluminum shaft that is about 1/2 the weight of the factory 2-piece. The shaft features larger, replaceable and greaseable u-joints and can handle about 650WHP. By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the fact the hanger bearing is not moving up and down during acceleration. Availa...

{"id":10514731400,"title":"DRIVESHAFT SHOP ALUMINUM DRIVESHAFT FOR 5SPD 89-94 240SX W\/O ABS NISH1","handle":"nish1","description":"\u003cdiv class=\"std\"\u003e\n S13 Non-ABS with KA24\/SR20 5-Speed Aluminum driveshaft. This is our single shaft conversion for the 240SX platform. This is a complete 6061-T6 aluminum shaft that is about 1\/2 the weight of the factory 2-piece. The shaft features larger, replaceable and greaseable u-joints and can handle about 650WHP. By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the fact the hanger bearing is not moving up and down during acceleration. Available for most popular motor\/trans combinations, if you don’t see yours listed, custom shafts are also available.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: Whether or not the car was equipped with ABS from the factory will change the length of the driveshaft. Be sure to check vehicle before ordering.\u003c\/div\u003e","published_at":"2017-08-16T01:52:02-07:00","created_at":"2017-08-16T01:52:03-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Subaru"],"price":77162,"price_min":77162,"price_max":77162,"available":true,"price_varies":false,"compare_at_price":77162,"compare_at_price_min":77162,"compare_at_price_max":77162,"compare_at_price_varies":false,"variants":[{"id":43740091912,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssNISH1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP ALUMINUM DRIVESHAFT FOR 5SPD 89-94 240SX W\/O ABS NISH1","public_title":null,"options":["Default Title"],"price":77162,"weight":6759,"compare_at_price":77162,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/nish1-s_1.jpg?v=1632089206"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/nish1-s_1.jpg?v=1632089206","options":["Title"],"media":[{"alt":null,"id":23109371461790,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/nish1-s_1.jpg?v=1632089206"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/nish1-s_1.jpg?v=1632089206","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"std\"\u003e\n S13 Non-ABS with KA24\/SR20 5-Speed Aluminum driveshaft. This is our single shaft conversion for the 240SX platform. This is a complete 6061-T6 aluminum shaft that is about 1\/2 the weight of the factory 2-piece. The shaft features larger, replaceable and greaseable u-joints and can handle about 650WHP. By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the fact the hanger bearing is not moving up and down during acceleration. Available for most popular motor\/trans combinations, if you don’t see yours listed, custom shafts are also available.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: Whether or not the car was equipped with ABS from the factory will change the length of the driveshaft. Be sure to check vehicle before ordering.\u003c\/div\u003e"}

$771.62

DRIVESHAFT SHOP 1PC ALUMINUM DRIVESHAFT FOR AUTOMATIC 02-07 WRX SUSH6

The 1-piece driveshaft for the Subaru Impreza WRX with 6-Speed transmission conversion is a c...

The 1-piece driveshaft for the Subaru Impreza WRX with 6-Speed transmission conversion is a complete 6061-T6 3" aluminum shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece aluminum shaft features larger, replaceable and greaseable u-joints and can handle about 650WHP and 155 MPH. By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hange...

{"id":10514731272,"title":"DRIVESHAFT SHOP 1PC ALUMINUM DRIVESHAFT FOR AUTOMATIC 02-07 WRX SUSH6","handle":"sush6","description":"\u003cp\u003e\n The 1-piece driveshaft for the Subaru Impreza WRX with 6-Speed transmission conversion is a complete 6061-T6 3\" aluminum shaft that is approximately 1\/2 the weight of the factory 2-piece driveshaft. The 1-piece aluminum shaft features larger, replaceable and greaseable u-joints and can handle about 650WHP and 155 MPH. By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor\/trans combinations, if you don’t see yours listed, custom shafts are also available.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: This driveshaft is rated to 650WHP and a top speed of 155MPH and is not recommended for use above this speed. This aluminum driveshaft is 3\" diameter and your vehicle may require some minor modifications to the driveshaft tunnel in order to ensure proper fitment. Make sure there is at least 3\/4\" clearance around the driveshaft before use, and that the differential bushings are not worn as this can cause damage to the driveshaft. Damage caused by improper fitment will not be covered under warranty.\u003c\/p\u003e","published_at":"2017-08-16T01:52:01-07:00","created_at":"2017-08-16T01:52:02-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Subaru"],"price":76449,"price_min":76449,"price_max":76449,"available":true,"price_varies":false,"compare_at_price":76449,"compare_at_price_min":76449,"compare_at_price_max":76449,"compare_at_price_varies":false,"variants":[{"id":43740091720,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssSUSH6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC ALUMINUM DRIVESHAFT FOR AUTOMATIC 02-07 WRX SUSH6","public_title":null,"options":["Default Title"],"price":76449,"weight":7983,"compare_at_price":76449,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/fdsh9-a-mag2_c90d0bc0-a512-4e91-8c56-1416139ec870.gif?v=1674859424"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/fdsh9-a-mag2_c90d0bc0-a512-4e91-8c56-1416139ec870.gif?v=1674859424","options":["Title"],"media":[{"alt":null,"id":27774958043294,"position":1,"preview_image":{"aspect_ratio":2.007,"height":299,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/fdsh9-a-mag2_c90d0bc0-a512-4e91-8c56-1416139ec870.gif?v=1674859424"},"aspect_ratio":2.007,"height":299,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/fdsh9-a-mag2_c90d0bc0-a512-4e91-8c56-1416139ec870.gif?v=1674859424","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\n The 1-piece driveshaft for the Subaru Impreza WRX with 6-Speed transmission conversion is a complete 6061-T6 3\" aluminum shaft that is approximately 1\/2 the weight of the factory 2-piece driveshaft. The 1-piece aluminum shaft features larger, replaceable and greaseable u-joints and can handle about 650WHP and 155 MPH. By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor\/trans combinations, if you don’t see yours listed, custom shafts are also available.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: This driveshaft is rated to 650WHP and a top speed of 155MPH and is not recommended for use above this speed. This aluminum driveshaft is 3\" diameter and your vehicle may require some minor modifications to the driveshaft tunnel in order to ensure proper fitment. Make sure there is at least 3\/4\" clearance around the driveshaft before use, and that the differential bushings are not worn as this can cause damage to the driveshaft. Damage caused by improper fitment will not be covered under warranty.\u003c\/p\u003e"}

$764.49

DRIVESHAFT SHOP 1PC ALUMINUM DRIVESHAFT FOR 5SPD 02-07 WRX W/R160 SUSH1

The 1-piece driveshaft for the Subaru Impreza WRX is a complete 6061-T6 3" aluminum shaft tha...

The 1-piece driveshaft for the Subaru Impreza WRX is a complete 6061-T6 3" aluminum shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece aluminum shaft features larger, replaceable and greaseable u-joints and can handle about 650WHP and 155 MPH. By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down d...

{"id":10514731144,"title":"DRIVESHAFT SHOP 1PC ALUMINUM DRIVESHAFT FOR 5SPD 02-07 WRX W\/R160 SUSH1","handle":"sush1","description":"\u003cdiv class=\"std\"\u003e\n The 1-piece driveshaft for the Subaru Impreza WRX is a complete 6061-T6 3\" aluminum shaft that is approximately 1\/2 the weight of the factory 2-piece driveshaft. The 1-piece aluminum shaft features larger, replaceable and greaseable u-joints and can handle about 650WHP and 155 MPH. By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor\/trans combinations, if you don’t see yours listed, custom shafts are also available.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: This driveshaft is rated to 650WHP and a top speed of 155MPH and is not recommended for use above this speed. This aluminum driveshaft is 3\" diameter and your vehicle may require some minor modifications to the driveshaft tunnel in order to ensure proper fitment. Make sure there is at least 3\/4\" clearance around the driveshaft before use, and that the differential bushings are not worn as this can cause damage to the driveshaft. Damage caused by improper fitment will not be covered under warranty.\u003cbr\u003e\n \u003cbr\u003e\n New 2-3\/4\" diameter 1-piece Carbon-Fiber driveshaft with no clearance issues or MPH restrictions coming soon...\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eSUSH1\u003c\/span\u003e\n\u003c\/h4\u003e","published_at":"2017-08-16T01:52:00-07:00","created_at":"2017-08-16T01:52:01-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Subaru"],"price":76449,"price_min":76449,"price_max":76449,"available":true,"price_varies":false,"compare_at_price":76449,"compare_at_price_min":76449,"compare_at_price_max":76449,"compare_at_price_varies":false,"variants":[{"id":43740091592,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssSUSH1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC ALUMINUM DRIVESHAFT FOR 5SPD 02-07 WRX W\/R160 SUSH1","public_title":null,"options":["Default Title"],"price":76449,"weight":8119,"compare_at_price":76449,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/fdsh9-a-mag2_46d18752-ed8a-4ab3-8bc0-6040fa78f00a.gif?v=1668045239"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/fdsh9-a-mag2_46d18752-ed8a-4ab3-8bc0-6040fa78f00a.gif?v=1668045239","options":["Title"],"media":[{"alt":null,"id":27292029321374,"position":1,"preview_image":{"aspect_ratio":2.007,"height":299,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/fdsh9-a-mag2_46d18752-ed8a-4ab3-8bc0-6040fa78f00a.gif?v=1668045239"},"aspect_ratio":2.007,"height":299,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/fdsh9-a-mag2_46d18752-ed8a-4ab3-8bc0-6040fa78f00a.gif?v=1668045239","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"std\"\u003e\n The 1-piece driveshaft for the Subaru Impreza WRX is a complete 6061-T6 3\" aluminum shaft that is approximately 1\/2 the weight of the factory 2-piece driveshaft. The 1-piece aluminum shaft features larger, replaceable and greaseable u-joints and can handle about 650WHP and 155 MPH. By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor\/trans combinations, if you don’t see yours listed, custom shafts are also available.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: This driveshaft is rated to 650WHP and a top speed of 155MPH and is not recommended for use above this speed. This aluminum driveshaft is 3\" diameter and your vehicle may require some minor modifications to the driveshaft tunnel in order to ensure proper fitment. Make sure there is at least 3\/4\" clearance around the driveshaft before use, and that the differential bushings are not worn as this can cause damage to the driveshaft. Damage caused by improper fitment will not be covered under warranty.\u003cbr\u003e\n \u003cbr\u003e\n New 2-3\/4\" diameter 1-piece Carbon-Fiber driveshaft with no clearance issues or MPH restrictions coming soon...\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eSUSH1\u003c\/span\u003e\n\u003c\/h4\u003e"}

$764.49

DRIVESHAFT SHOP LEVEL 5 RIGHT AXLE FOR 10-14 CAMARO V8 RA5425X5

THIS IS FOR A SINGLE AXLE 1. Full 30 spline certified 300M center bars (not just 28 spline ...

THIS IS FOR A SINGLE AXLE 1. Full 30 spline certified 300M center bars (not just 28 spline like a factory 108mm CV would use) 30 spline like the Viper T56 and any upgraded T56 its the reason we do too. If the cages are stronger the bars need to be also (same center bar used in Lingenfelter's 6-speed car) 2. Certified 4340AQ cages REM polished with a re-designed radius on the cage window, cages are full 4340 not the standard material that have been carbonized and made brittle. ...

{"id":10514730952,"title":"DRIVESHAFT SHOP LEVEL 5 RIGHT AXLE FOR 10-14 CAMARO V8 RA5425X5","handle":"ra5425x5","description":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n 1. Full 30 spline certified 300M center bars (not just 28 spline like a factory 108mm CV would use) 30 spline like the Viper T56 and any upgraded T56 its the reason we do too. If the cages are stronger the bars need to be also (same center bar used in Lingenfelter's 6-speed car)\u003cbr\u003e\n \u003cbr\u003e\n 2. Certified 4340AQ cages REM polished with a re-designed radius on the cage window, cages are full 4340 not the standard material that have been carbonized and made brittle.\u003cbr\u003e\n \u003cbr\u003e\n 3. Our Center race in the CV is certified 300M, this should need no explanation, no one else uses this and we can prove it.....\u003cbr\u003e\n \u003cbr\u003e\n 4. CNC Rolled splines. Most know a forging is always stronger than billet. Here at The Driveshaft shop we roll our axle splines, this is by far the strongest way to form a spline and is far superior to \"old technology\" cut splines. by rolling a spline you are taking the material that was already there and re-forming it (forging). by cutting a spline you are removing material and the inherent grain structure that its made with. Don't take our word for this, please search the internet and see what spline is better. If your looking for the strongest axle you have arrived at the right place.\u003c\/p\u003e","published_at":"2017-08-16T01:51:59-07:00","created_at":"2017-08-16T01:52:00-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Chevrolet"],"price":92776,"price_min":92776,"price_max":92776,"available":true,"price_varies":false,"compare_at_price":92449,"compare_at_price_min":92449,"compare_at_price_max":92449,"compare_at_price_varies":false,"variants":[{"id":43740091400,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssRA5425X5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP LEVEL 5 RIGHT AXLE FOR 10-14 CAMARO V8 RA5425X5","public_title":null,"options":["Default Title"],"price":92776,"weight":12746,"compare_at_price":92449,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_77602ea8-764a-452d-a9c3-c8a4b8c69cb2.jpg?v=1676452136"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_77602ea8-764a-452d-a9c3-c8a4b8c69cb2.jpg?v=1676452136","options":["Title"],"media":[{"alt":null,"id":27890065866910,"position":1,"preview_image":{"aspect_ratio":1.0,"height":218,"width":218,"src":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_77602ea8-764a-452d-a9c3-c8a4b8c69cb2.jpg?v=1676452136"},"aspect_ratio":1.0,"height":218,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_77602ea8-764a-452d-a9c3-c8a4b8c69cb2.jpg?v=1676452136","width":218}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n 1. Full 30 spline certified 300M center bars (not just 28 spline like a factory 108mm CV would use) 30 spline like the Viper T56 and any upgraded T56 its the reason we do too. If the cages are stronger the bars need to be also (same center bar used in Lingenfelter's 6-speed car)\u003cbr\u003e\n \u003cbr\u003e\n 2. Certified 4340AQ cages REM polished with a re-designed radius on the cage window, cages are full 4340 not the standard material that have been carbonized and made brittle.\u003cbr\u003e\n \u003cbr\u003e\n 3. Our Center race in the CV is certified 300M, this should need no explanation, no one else uses this and we can prove it.....\u003cbr\u003e\n \u003cbr\u003e\n 4. CNC Rolled splines. Most know a forging is always stronger than billet. Here at The Driveshaft shop we roll our axle splines, this is by far the strongest way to form a spline and is far superior to \"old technology\" cut splines. by rolling a spline you are taking the material that was already there and re-forming it (forging). by cutting a spline you are removing material and the inherent grain structure that its made with. Don't take our word for this, please search the internet and see what spline is better. If your looking for the strongest axle you have arrived at the right place.\u003c\/p\u003e"}

$927.76

18497 – 18504 product(s) of 18515

Previous
1
…
2311
2312
2313
2314
2315
Next