Axles & Driveshafts

Sort products:

Show:

DRIVESHAFT SHOP LEVEL 2 FRONT LEFT AXLE W/20MM LONGER BAR FOR 01-07 EVO

THIS IS FOR A SINGLE AXLEDRIVESHAFT SHOP LEVEL 2 FRONT LEFT AXLE W/20MM LONGER BAR FOR 01-07 EVO

$399.99 $430.00

DRIVESHAFT SHOP DIRECT BOLT IN REAR AXLE FOR 06-07 MAZDASPEED 6 RA6285L2

THIS IS FOR A SINGLE AXLEDRIVESHAFT SHOP DIRECT BOLT IN REAR AXLES FOR 06-07 MAZDASPEED 6

$545.08

DRIVESHAFT SHOP COMPLETE BASIC LEVEL FRONT LEFT AXLE FOR 01-07 MITSUBISHI EVO RA9853L2

THIS IS FOR A SINGLE AXLEDRIVESHAFT SHOP COMPLETE BASIC LEVEL FRONT LEFT AXLE FOR 01-07 MITSUBISH...

THIS IS FOR A SINGLE AXLEDRIVESHAFT SHOP COMPLETE BASIC LEVEL FRONT LEFT AXLE FOR 01-07 MITSUBISHI EVO

$549.76

DRIVESHAFT SHOP REAR AXLE OUTER CV DIFF & 30 SPLINE BARS FOR 95-99 ECLIPSE MI-OUTER-1

THIS IS FOR A SINGLE AXLE So the cars getting old and the outer CV is now stuck in the hub ...

THIS IS FOR A SINGLE AXLE So the cars getting old and the outer CV is now stuck in the hub ? This is an outer CV (1) including boots clamps and grease, This is designed for the Stock axles that have the NTN stamp on them along the large boot surface of the CV. Most will be like this We need to know if its a LSD or an open Diff or not this is where it gets tricky, every LSD diff axle we have seen have 30 internal splines (This is the spline inside the boot) . The open ones we have...

{"id":10514737544,"title":"DRIVESHAFT SHOP REAR AXLE OUTER CV DIFF \u0026 30 SPLINE BARS FOR 95-99 ECLIPSE MI-OUTER-1","handle":"mi-outer-1","description":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n So the cars getting old and the outer CV is now stuck in the hub ? This is an outer CV (1) including boots clamps and grease, This is designed for the Stock axles that have the NTN stamp on them along the large boot surface of the CV. Most will be like this\u003cbr\u003e\n \u003cbr\u003e\n We need to know if its a LSD or an open Diff or not this is where it gets tricky, every LSD diff axle we have seen have 30 internal splines (This is the spline inside the boot) . The open ones we have seen have been 23 internal splines. This holds true for most but we have seen exceptions to this rule. you can base it on this or just pull it apart and count. If you want to make 100% sure you have a factory axle and want the right end pull the CV off and count the spline.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n This is for (1) LSD style outer CV with the 30 internal splines: kit comes with boots clamps and grease along with a new axle nut.\u003c\/p\u003e\n \u003cp\u003e\n \u003c\/p\u003e","published_at":"2017-08-16T01:52:39-07:00","created_at":"2017-08-16T01:52:40-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Mitsubishi"],"price":12999,"price_min":12999,"price_max":12999,"available":true,"price_varies":false,"compare_at_price":17500,"compare_at_price_min":17500,"compare_at_price_max":17500,"compare_at_price_varies":false,"variants":[{"id":45093502091422,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssMI-OUTER-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP REAR AXLE OUTER CV DIFF \u0026 30 SPLINE BARS FOR 95-99 ECLIPSE MI-OUTER-1","public_title":null,"options":["Default Title"],"price":12999,"weight":4082,"compare_at_price":17500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/files\/809075a667bc9d3bf3051d6b82f52f1d.jpg?v=1739682620"],"featured_image":"\/\/vexms.com\/cdn\/shop\/files\/809075a667bc9d3bf3051d6b82f52f1d.jpg?v=1739682620","options":["Title"],"media":[{"alt":null,"id":31541424390302,"position":1,"preview_image":{"aspect_ratio":1.778,"height":405,"width":720,"src":"\/\/vexms.com\/cdn\/shop\/files\/809075a667bc9d3bf3051d6b82f52f1d.jpg?v=1739682620"},"aspect_ratio":1.778,"height":405,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/files\/809075a667bc9d3bf3051d6b82f52f1d.jpg?v=1739682620","width":720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n So the cars getting old and the outer CV is now stuck in the hub ? This is an outer CV (1) including boots clamps and grease, This is designed for the Stock axles that have the NTN stamp on them along the large boot surface of the CV. Most will be like this\u003cbr\u003e\n \u003cbr\u003e\n We need to know if its a LSD or an open Diff or not this is where it gets tricky, every LSD diff axle we have seen have 30 internal splines (This is the spline inside the boot) . The open ones we have seen have been 23 internal splines. This holds true for most but we have seen exceptions to this rule. you can base it on this or just pull it apart and count. If you want to make 100% sure you have a factory axle and want the right end pull the CV off and count the spline.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n This is for (1) LSD style outer CV with the 30 internal splines: kit comes with boots clamps and grease along with a new axle nut.\u003c\/p\u003e\n \u003cp\u003e\n \u003c\/p\u003e"}

$129.99 $175.00

DRIVESHAFT SHOP LEVEL 5 FRONT RIGHT AXLE FOR 08-14 NISSAN GTR RA8015L5

THIS IS FOR A SINGLE AXLE The Level 5 complete front axles for the GT-R. The axl...

THIS IS FOR A SINGLE AXLE The Level 5 complete front axles for the GT-R. The axle center bar (the weakest link on the factory front axles) has been upgraded from the small stock 27 spline to our larger 36 spline bars made from high quality aerospace grade material. this axle features a direct fit outer CV made from a proprietary material, billet inner CV and spline plug into the differential on the male side and a Porsche-style 108mm inner with precision machined adapter plat...

{"id":10514737416,"title":"DRIVESHAFT SHOP LEVEL 5 FRONT RIGHT AXLE FOR 08-14 NISSAN GTR RA8015L5","handle":"ra8015l5","description":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cdiv class=\"std\"\u003e\n \u003cdiv class=\"std\"\u003e\n \u003cdiv class=\"std\"\u003e\n The Level 5 complete front axles for the GT-R. The axle center bar (the weakest link on the factory front axles) has been upgraded from the small stock 27 spline to our larger 36 spline bars made from high quality aerospace grade material. this axle features a direct fit outer CV made from a proprietary material, billet inner CV and spline plug into the differential on the male side and a Porsche-style 108mm inner with precision machined adapter plate to mount to the drive flange on the opposite side. Capable of 1000HP and can be used for street or drag with no modifications required.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e","published_at":"2017-08-16T01:52:38-07:00","created_at":"2017-08-16T01:52:39-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Nissan"],"price":103519,"price_min":103519,"price_max":103519,"available":true,"price_varies":false,"compare_at_price":103448,"compare_at_price_min":103448,"compare_at_price_max":103448,"compare_at_price_varies":false,"variants":[{"id":43740146952,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssRA8015L5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP LEVEL 5 FRONT RIGHT AXLE FOR 08-14 NISSAN GTR RA8015L5","public_title":null,"options":["Default Title"],"price":103519,"weight":8845,"compare_at_price":103448,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_7005524a-b613-4484-a34d-8490474f8639.jpg?v=1676234699"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_7005524a-b613-4484-a34d-8490474f8639.jpg?v=1676234699","options":["Title"],"media":[{"alt":null,"id":27874549989534,"position":1,"preview_image":{"aspect_ratio":1.0,"height":218,"width":218,"src":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_7005524a-b613-4484-a34d-8490474f8639.jpg?v=1676234699"},"aspect_ratio":1.0,"height":218,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_7005524a-b613-4484-a34d-8490474f8639.jpg?v=1676234699","width":218}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cdiv class=\"std\"\u003e\n \u003cdiv class=\"std\"\u003e\n \u003cdiv class=\"std\"\u003e\n The Level 5 complete front axles for the GT-R. The axle center bar (the weakest link on the factory front axles) has been upgraded from the small stock 27 spline to our larger 36 spline bars made from high quality aerospace grade material. this axle features a direct fit outer CV made from a proprietary material, billet inner CV and spline plug into the differential on the male side and a Porsche-style 108mm inner with precision machined adapter plate to mount to the drive flange on the opposite side. Capable of 1000HP and can be used for street or drag with no modifications required.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e"}

$1,035.19

DRIVESHAFT SHOP LEVEL 5 FRONT LEFT AXLE FOR 08-14 NISSAN GTR RA8014L5

THIS IS FOR A SINGLE AXLE The Level 5 complete front axles for the GT-R. The axl...

{"id":10514737160,"title":"DRIVESHAFT SHOP LEVEL 5 FRONT LEFT AXLE FOR 08-14 NISSAN GTR RA8014L5","handle":"ra8014l5","description":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cdiv class=\"std\"\u003e\n \u003cdiv class=\"std\"\u003e\n \u003cdiv class=\"std\"\u003e\n The Level 5 complete front axles for the GT-R. The axle center bar (the weakest link on the factory front axles) has been upgraded from the small stock 27 spline to our larger 36 spline bars made from high quality aerospace grade material. this axle features a direct fit outer CV made from a proprietary material, billet inner CV and spline plug into the differential on the male side and a Porsche-style 108mm inner with precision machined adapter plate to mount to the drive flange on the opposite side. Capable of 1000HP and can be used for street or drag with no modifications required.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e","published_at":"2017-08-16T01:52:38-07:00","created_at":"2017-08-16T01:52:38-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Nissan"],"price":103519,"price_min":103519,"price_max":103519,"available":true,"price_varies":false,"compare_at_price":103448,"compare_at_price_min":103448,"compare_at_price_max":103448,"compare_at_price_varies":false,"variants":[{"id":43740146696,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssRA8014L5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP LEVEL 5 FRONT LEFT AXLE FOR 08-14 NISSAN GTR RA8014L5","public_title":null,"options":["Default Title"],"price":103519,"weight":9752,"compare_at_price":103448,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_18f88f97-11ea-4a37-b560-bc8f33a8393d.jpg?v=1676234706"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_18f88f97-11ea-4a37-b560-bc8f33a8393d.jpg?v=1676234706","options":["Title"],"media":[{"alt":null,"id":27874550448286,"position":1,"preview_image":{"aspect_ratio":1.0,"height":218,"width":218,"src":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_18f88f97-11ea-4a37-b560-bc8f33a8393d.jpg?v=1676234706"},"aspect_ratio":1.0,"height":218,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_18f88f97-11ea-4a37-b560-bc8f33a8393d.jpg?v=1676234706","width":218}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cdiv class=\"std\"\u003e\n \u003cdiv class=\"std\"\u003e\n \u003cdiv class=\"std\"\u003e\n The Level 5 complete front axles for the GT-R. The axle center bar (the weakest link on the factory front axles) has been upgraded from the small stock 27 spline to our larger 36 spline bars made from high quality aerospace grade material. this axle features a direct fit outer CV made from a proprietary material, billet inner CV and spline plug into the differential on the male side and a Porsche-style 108mm inner with precision machined adapter plate to mount to the drive flange on the opposite side. Capable of 1000HP and can be used for street or drag with no modifications required.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e"}

$1,035.19

DRIVESHAFT SHOP 3.5IN ALUMINUM DRIVESHAFT FOR AUTOMATIC 2016 CAMARO V8

Available now for the 2016 Camaro Automatic is our 3-1/2 aluminum shaft with CV . We have don...

Available now for the 2016 Camaro Automatic is our 3-1/2 aluminum shaft with CV . We have done extensive testing with stock rears and with our 9" kit and believe this to the the most cost effective trouble free drive shaft for the Camaro available today. The shaft will come with our signature billet plates for each end so you don't have to go in to the rear taking a chance on upsetting the crush collar (see below for billet plate VS changing to a Pinion yoke below) Our shaft comes with a ...

{"id":10514737096,"title":"DRIVESHAFT SHOP 3.5IN ALUMINUM DRIVESHAFT FOR AUTOMATIC 2016 CAMARO V8","handle":"gmca18-a","description":"\u003cp\u003e\n Available now for the 2016 Camaro Automatic is our 3-1\/2 aluminum shaft with CV . We have done extensive testing with stock rears and with our 9\" kit and believe this to the the most cost effective trouble free drive shaft for the Camaro available today. The shaft will come with our signature billet plates for each end so you don't have to go in to the rear taking a chance on upsetting the crush collar (see below for billet plate VS changing to a Pinion yoke below) Our shaft comes with a 300m stub system mounted into a billet aluminum plate to ensure not only strength but lighter weight than the normal way of doing this type of end (look closely at the CV end its not all steel) The shaft only weighs 26lbs and come with special 12.9 uber strength hardware with back up lock nuts to ensure no loose bolts, we have been using this Billet aluminum style plate for over 10 years on thousands of 1000+Hp Supras-BMW's and many more with out any bolt issues.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n You will have to remove the heat shield from above center hanger mount to install a 3-1\/2\" shaft there is a possibility of clearance issues with aftermarket exhaust, This is a general warning, we have 9 test shafts out and not one had an issue. I have listed this because not all exhaust systems have been tested. (our Carbon fiber shaft will be made from 3-3\/8 and not the 3-3\/4 like other manufacturers)\u003c\/p\u003e","published_at":"2017-08-16T01:52:37-07:00","created_at":"2017-08-16T01:52:37-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Chevrolet"],"price":89999,"price_min":89999,"price_max":89999,"available":true,"price_varies":false,"compare_at_price":89999,"compare_at_price_min":89999,"compare_at_price_max":89999,"compare_at_price_varies":false,"variants":[{"id":43740146632,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssGMCA18-A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 3.5IN ALUMINUM DRIVESHAFT FOR AUTOMATIC 2016 CAMARO V8","public_title":null,"options":["Default Title"],"price":89999,"weight":32,"compare_at_price":89999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/31x_2burhemvl._sx355_92c8df72-2c99-4add-a664-7afe216b138e.jpg?v=1676465938"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/31x_2burhemvl._sx355_92c8df72-2c99-4add-a664-7afe216b138e.jpg?v=1676465938","options":["Title"],"media":[{"alt":null,"id":27891407847582,"position":1,"preview_image":{"aspect_ratio":2.006,"height":177,"width":355,"src":"\/\/vexms.com\/cdn\/shop\/products\/31x_2burhemvl._sx355_92c8df72-2c99-4add-a664-7afe216b138e.jpg?v=1676465938"},"aspect_ratio":2.006,"height":177,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/31x_2burhemvl._sx355_92c8df72-2c99-4add-a664-7afe216b138e.jpg?v=1676465938","width":355}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\n Available now for the 2016 Camaro Automatic is our 3-1\/2 aluminum shaft with CV . We have done extensive testing with stock rears and with our 9\" kit and believe this to the the most cost effective trouble free drive shaft for the Camaro available today. The shaft will come with our signature billet plates for each end so you don't have to go in to the rear taking a chance on upsetting the crush collar (see below for billet plate VS changing to a Pinion yoke below) Our shaft comes with a 300m stub system mounted into a billet aluminum plate to ensure not only strength but lighter weight than the normal way of doing this type of end (look closely at the CV end its not all steel) The shaft only weighs 26lbs and come with special 12.9 uber strength hardware with back up lock nuts to ensure no loose bolts, we have been using this Billet aluminum style plate for over 10 years on thousands of 1000+Hp Supras-BMW's and many more with out any bolt issues.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n You will have to remove the heat shield from above center hanger mount to install a 3-1\/2\" shaft there is a possibility of clearance issues with aftermarket exhaust, This is a general warning, we have 9 test shafts out and not one had an issue. I have listed this because not all exhaust systems have been tested. (our Carbon fiber shaft will be made from 3-3\/8 and not the 3-3\/4 like other manufacturers)\u003c\/p\u003e"}

$899.99

DRIVESHAFT SHOP 3.5IN ALUMINUM DRIVESHAFT FOR AUTOMATIC 10-15 CAMARO V8 GMCA11-A

Available now for the 2010-2015 Camaro Automatic is our 3-1/2 aluminum shaft with CV . We hav...

Available now for the 2010-2015 Camaro Automatic is our 3-1/2 aluminum shaft with CV . We have done extensive testing with stock rears and with our 9" kit and believe this to the the most cost effective trouble free drive shaft for the Camaro available today. The shaft will come with our signature billet plates for each end so you done have to go in to the rear taking a chance on upsetting the crush collar (see below for billet plate VS changing to a Pinion yoke below) Our shaft comes wit...

{"id":10514737032,"title":"DRIVESHAFT SHOP 3.5IN ALUMINUM DRIVESHAFT FOR AUTOMATIC 10-15 CAMARO V8 GMCA11-A","handle":"gmca11-a","description":"\u003cp\u003e\n Available now for the 2010-2015 Camaro Automatic is our 3-1\/2 aluminum shaft with CV . We have done extensive testing with stock rears and with our 9\" kit and believe this to the the most cost effective trouble free drive shaft for the Camaro available today. The shaft will come with our signature billet plates for each end so you done have to go in to the rear taking a chance on upsetting the crush collar (see below for billet plate VS changing to a Pinion yoke below) Our shaft comes with a 300m stub system mounted into a billet aluminum plate to ensure not only strength but lighter weight than the normal way of doing this type of end (look closely at the CV end its not all steel) The shaft only weighs 17lbs and come with special 12.9 uber strength hardware with back up lock nuts to ensure no loose bolts, we have been using this Billet aluminum style plate for over 10 years on thousands of 1000+Hp Supras-BMW's and many more with out any bolt issues.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n You will have to remove the heat shield from above center hanger mount to install a 3-1\/2\" shaft there is a possibility of clearance issues with aftermarket exhaust, This is a general warning, we have 9 test shafts out and not one had an issue. I have listed this because not all exhaust systems have been tested. (our Carbon fiber shaft will be made from 3-3\/8 and not the 3-3\/4 like other manufacturers)\u003c\/p\u003e","published_at":"2017-08-16T01:52:37-07:00","created_at":"2017-08-16T01:52:37-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Chevrolet"],"price":126697,"price_min":126697,"price_max":126697,"available":true,"price_varies":false,"compare_at_price":126697,"compare_at_price_min":126697,"compare_at_price_max":126697,"compare_at_price_varies":false,"variants":[{"id":43740146568,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssGMCA11-A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 3.5IN ALUMINUM DRIVESHAFT FOR AUTOMATIC 10-15 CAMARO V8 GMCA11-A","public_title":null,"options":["Default Title"],"price":126697,"weight":13562,"compare_at_price":126697,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/31x_2burhemvl._sx355.jpg?v=1675957177"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/31x_2burhemvl._sx355.jpg?v=1675957177","options":["Title"],"media":[{"alt":null,"id":27857500078238,"position":1,"preview_image":{"aspect_ratio":2.006,"height":177,"width":355,"src":"\/\/vexms.com\/cdn\/shop\/products\/31x_2burhemvl._sx355.jpg?v=1675957177"},"aspect_ratio":2.006,"height":177,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/31x_2burhemvl._sx355.jpg?v=1675957177","width":355}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\n Available now for the 2010-2015 Camaro Automatic is our 3-1\/2 aluminum shaft with CV . We have done extensive testing with stock rears and with our 9\" kit and believe this to the the most cost effective trouble free drive shaft for the Camaro available today. The shaft will come with our signature billet plates for each end so you done have to go in to the rear taking a chance on upsetting the crush collar (see below for billet plate VS changing to a Pinion yoke below) Our shaft comes with a 300m stub system mounted into a billet aluminum plate to ensure not only strength but lighter weight than the normal way of doing this type of end (look closely at the CV end its not all steel) The shaft only weighs 17lbs and come with special 12.9 uber strength hardware with back up lock nuts to ensure no loose bolts, we have been using this Billet aluminum style plate for over 10 years on thousands of 1000+Hp Supras-BMW's and many more with out any bolt issues.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n You will have to remove the heat shield from above center hanger mount to install a 3-1\/2\" shaft there is a possibility of clearance issues with aftermarket exhaust, This is a general warning, we have 9 test shafts out and not one had an issue. I have listed this because not all exhaust systems have been tested. (our Carbon fiber shaft will be made from 3-3\/8 and not the 3-3\/4 like other manufacturers)\u003c\/p\u003e"}

$1,266.97

17953 – 17960 product(s) of 18012

Previous
1
…
2243
2244
2245
2246
2247
…
2252
Next