My account

Home
Collections
Megan Racing Brand

Megan Racing Brand

Sort products:

Show:

Megan Racing Tie Rod End for Mazda RX-8 2003+ MRS-MZ-1481

Megan Racing Tie Rod End for Mazda RX-8 2003+ RC - MRS-MZ-1481Those who seek the most from their ...

Megan Racing Tie Rod End for Mazda RX-8 2003+ RC - MRS-MZ-1481Those who seek the most from their car know that in the rigors of competition you need to extract every ounce of performance from your machine. You need the capability to have every degree of adjustment above and beyond that of a street driven vehicle. You need the strength to withstands the stresses and strains of hard corners, a rough course and brutal weight transfer and chassis flex. It s within this understanding that Megan R...

{"id":7507250610334,"title":"Megan Racing Tie Rod End for Mazda RX-8 2003+ MRS-MZ-1481","handle":"megan-racing-tie-rod-end-for-mazda-rx-8-2003","description":"Megan Racing Tie Rod End for Mazda RX-8 2003+ RC - MRS-MZ-1481\u003cbr\u003e\u003cbr\u003eThose who seek the most from their car know that in the rigors of competition you need to extract every ounce of performance from your machine. You need the capability to have every degree of adjustment above and beyond that of a street driven vehicle. You need the strength to withstands the stresses and strains of hard corners, a rough course and brutal weight transfer and chassis flex.\n\nIt s within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any competition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.\n\nThese Outer Tie-Rod Ends are compatible with both our Inner Tie-Rods and the OEM Tie Rods. They replace the OEM Tie Rod Ends with a high strength aluminum alloy Tie Rod End that can be used to fine tune Toe-Adjustments and by proper use of spacer combination, can be set to proper suspension geometry to achieve the most steering angle possible which is crucial for drifting and other motor-sports.","published_at":"2023-07-01T08:50:11-07:00","created_at":"2023-07-01T08:17:31-07:00","vendor":"VEX Motorsports","type":"Other","tags":["Suspension Arms"],"price":11941,"price_min":11941,"price_max":11941,"available":true,"price_varies":false,"compare_at_price":12000,"compare_at_price_min":12000,"compare_at_price_max":12000,"compare_at_price_varies":false,"variants":[{"id":42646445162654,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MRS-MZ-1481","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Megan Racing Tie Rod End for Mazda RX-8 2003+ MRS-MZ-1481","public_title":null,"options":["Default Title"],"price":11941,"weight":1814,"compare_at_price":12000,"inventory_quantity":47,"inventory_management":"shopify","inventory_policy":"continue","barcode":"788536935613","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/files\/mrs-mz-1481-1.jpg?v=1688226101"],"featured_image":"\/\/vexms.com\/cdn\/shop\/files\/mrs-mz-1481-1.jpg?v=1688226101","options":["Title"],"media":[{"alt":null,"id":28449793671326,"position":1,"preview_image":{"aspect_ratio":1.502,"height":666,"width":1000,"src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-mz-1481-1.jpg?v=1688226101"},"aspect_ratio":1.502,"height":666,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-mz-1481-1.jpg?v=1688226101","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Megan Racing Tie Rod End for Mazda RX-8 2003+ RC - MRS-MZ-1481\u003cbr\u003e\u003cbr\u003eThose who seek the most from their car know that in the rigors of competition you need to extract every ounce of performance from your machine. You need the capability to have every degree of adjustment above and beyond that of a street driven vehicle. You need the strength to withstands the stresses and strains of hard corners, a rough course and brutal weight transfer and chassis flex.\n\nIt s within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any competition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.\n\nThese Outer Tie-Rod Ends are compatible with both our Inner Tie-Rods and the OEM Tie Rods. They replace the OEM Tie Rod Ends with a high strength aluminum alloy Tie Rod End that can be used to fine tune Toe-Adjustments and by proper use of spacer combination, can be set to proper suspension geometry to achieve the most steering angle possible which is crucial for drifting and other motor-sports."}

$119.41 $120.00

Megan Racing Rear Camber Kit for Mazda CX5 12-16 MRS-MZ-1689

Megan Racing Rear Camber Kit for Mazda CX5 12-16 - MRS-MZ-1689Wheel alignment is absolutely cruci...

Megan Racing Rear Camber Kit for Mazda CX5 12-16 - MRS-MZ-1689Wheel alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under-steer, over-steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to hav...

{"id":7507250544798,"title":"Megan Racing Rear Camber Kit for Mazda CX5 12-16 MRS-MZ-1689","handle":"megan-racing-rear-camber-kit-for-mazda-cx5-12-16","description":"Megan Racing Rear Camber Kit for Mazda CX5 12-16 - MRS-MZ-1689\u003cbr\u003e\u003cbr\u003eWheel alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under-steer, over-steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under-steer and for optimum tire wear at stock height; under-steer is often undesired from a performance standpoint but is always dependent on driver style, therefore the adjust-ability of the alignment of a vehicle is critical when tuning for speed. The clock does not lie and having the vehicle alignment can make seconds of a difference.\n\nMegan Racing Inc. has developed reinforced and adjustable control arms to accommodate the needs of the aggressive and performance oriented tuner. These arms are constructed with Lightweight Steel-Alloy, which is able to withstand the stresses of extreme competition.\n\nThese Rear Arms are adjustable to fine tune your cars handling in the rear. When lowering a car, these will eliminate premature tire wear caused by the rear wheels riding upon the inside tread only. Combine with Rear Toe Arms and Rear-Rear Control Arms for the ultimate in adjust-ability.\n\nAlignment is crucial to the handling of your vehicle. Remembering that the only thing that touches the ground is your \"\"Contact Patch\"\" of your tires you have to make sure that your tires and wheels are doing exactly what you want. With this you must make sure you have the proper camber, caster and toe as well as make sure they are all working together and not against each other.","published_at":"2023-07-01T08:50:08-07:00","created_at":"2023-07-01T08:17:27-07:00","vendor":"VEX Motorsports","type":"Other","tags":["Suspension Arms"],"price":18529,"price_min":18529,"price_max":18529,"available":true,"price_varies":false,"compare_at_price":20600,"compare_at_price_min":20600,"compare_at_price_max":20600,"compare_at_price_varies":false,"variants":[{"id":42646445097118,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MRS-MZ-1689","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Megan Racing Rear Camber Kit for Mazda CX5 12-16 MRS-MZ-1689","public_title":null,"options":["Default Title"],"price":18529,"weight":3175,"compare_at_price":20600,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"continue","barcode":"788536935972","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/files\/mrs-mz-1689-1.jpg?v=1688226096"],"featured_image":"\/\/vexms.com\/cdn\/shop\/files\/mrs-mz-1689-1.jpg?v=1688226096","options":["Title"],"media":[{"alt":null,"id":28449793441950,"position":1,"preview_image":{"aspect_ratio":1.502,"height":643,"width":966,"src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-mz-1689-1.jpg?v=1688226096"},"aspect_ratio":1.502,"height":643,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-mz-1689-1.jpg?v=1688226096","width":966}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Megan Racing Rear Camber Kit for Mazda CX5 12-16 - MRS-MZ-1689\u003cbr\u003e\u003cbr\u003eWheel alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under-steer, over-steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under-steer and for optimum tire wear at stock height; under-steer is often undesired from a performance standpoint but is always dependent on driver style, therefore the adjust-ability of the alignment of a vehicle is critical when tuning for speed. The clock does not lie and having the vehicle alignment can make seconds of a difference.\n\nMegan Racing Inc. has developed reinforced and adjustable control arms to accommodate the needs of the aggressive and performance oriented tuner. These arms are constructed with Lightweight Steel-Alloy, which is able to withstand the stresses of extreme competition.\n\nThese Rear Arms are adjustable to fine tune your cars handling in the rear. When lowering a car, these will eliminate premature tire wear caused by the rear wheels riding upon the inside tread only. Combine with Rear Toe Arms and Rear-Rear Control Arms for the ultimate in adjust-ability.\n\nAlignment is crucial to the handling of your vehicle. Remembering that the only thing that touches the ground is your \"\"Contact Patch\"\" of your tires you have to make sure that your tires and wheels are doing exactly what you want. With this you must make sure you have the proper camber, caster and toe as well as make sure they are all working together and not against each other."}

$185.29 $206.00

Megan Racing Inner Tie Rods for Nissan 240SX 89-94 S13 MRS-NS-1760

Megan Racing Inner Tie Rods for Nissan 240SX 89-94 - MRS-NS-1760The 240SX/Silvia is an amazing p...

Megan Racing Inner Tie Rods for Nissan 240SX 89-94 - MRS-NS-1760The 240SX/Silvia is an amazing platform in all it s generations. The FR-Drivetrain and it s light weight offer a perfect balance between speed and agility. Used in a wide range of motorsports such as drag, drift, autocross, road race and even rally the 240SX has proven it s worth time and time again. As a street car, it s refined and well mannered, comfortable to drive in and stylish with a bit of aggression in it s curves. Alt...

{"id":7507250446494,"title":"Megan Racing Inner Tie Rods for Nissan 240SX 89-94 S13 MRS-NS-1760","handle":"megan-racing-inner-tie-rods-for-nissan-240sx-89-94-s13","description":"Megan Racing Inner Tie Rods for Nissan 240SX 89-94 - MRS-NS-1760\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 240SX\/Silvia is an amazing platform in all it s generations. The FR-Drivetrain and it s light weight offer a perfect balance between speed and agility. Used in a wide range of motorsports such as drag, drift, autocross, road race and even rally the 240SX has proven it s worth time and time again.\u003cbr\u003e \u003cbr\u003e As a street car, it s refined and well mannered, comfortable to drive in and stylish with a bit of aggression in it s curves. Although it s initial design was sporty and aggressive it was still designed as a street car.\u003cbr\u003e \u003cbr\u003e Those who seek the most from their car know that in the rigors of competition you need to extract every ounce of performance from your machine. You need the capability to have every degree of adjustment above and beyond that of a street driven vehicle. You need the strength to withstands the stresses and strains of hard corners, a rough course and brutal weight transfer and chassis flex.\u003cbr\u003e \u003cbr\u003e It s within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any comptition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.\u003cbr\u003e \u003cbr\u003e These Inner Tie Rods are constructed of a durable steel alloy which is much stronger that the OEM pieces that have a tendency to bend and break. With the spacer built into their knuckle, they allow the steering rack more travel to achieve the highest possible angle.\u003cbr\u003e \u003cbr\u003e -Will fit 89-94 180SX\/240SX and JDM Silvia (S13)\u003cbr\u003e -Much stronger than OEM pieces which often break and bend.\u003cbr\u003e -Increases steering angle to achieve a better more stable drift.\u003c\/p\u003e","published_at":"2023-07-01T08:50:08-07:00","created_at":"2023-07-01T08:17:27-07:00","vendor":"VEX Motorsports","type":"Other","tags":["Suspension Arms"],"price":9647,"price_min":9647,"price_max":9647,"available":true,"price_varies":false,"compare_at_price":9000,"compare_at_price_min":9000,"compare_at_price_max":9000,"compare_at_price_varies":false,"variants":[{"id":42646444998814,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MRS-NS-1760","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Megan Racing Inner Tie Rods for Nissan 240SX 89-94 S13 MRS-NS-1760","public_title":null,"options":["Default Title"],"price":9647,"weight":1814,"compare_at_price":9000,"inventory_quantity":11,"inventory_management":"shopify","inventory_policy":"continue","barcode":"788536933619","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1760-1.jpg?v=1688226096"],"featured_image":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1760-1.jpg?v=1688226096","options":["Title"],"media":[{"alt":null,"id":28449793376414,"position":1,"preview_image":{"aspect_ratio":1.502,"height":666,"width":1000,"src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1760-1.jpg?v=1688226096"},"aspect_ratio":1.502,"height":666,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1760-1.jpg?v=1688226096","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Megan Racing Inner Tie Rods for Nissan 240SX 89-94 - MRS-NS-1760\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 240SX\/Silvia is an amazing platform in all it s generations. The FR-Drivetrain and it s light weight offer a perfect balance between speed and agility. Used in a wide range of motorsports such as drag, drift, autocross, road race and even rally the 240SX has proven it s worth time and time again.\u003cbr\u003e \u003cbr\u003e As a street car, it s refined and well mannered, comfortable to drive in and stylish with a bit of aggression in it s curves. Although it s initial design was sporty and aggressive it was still designed as a street car.\u003cbr\u003e \u003cbr\u003e Those who seek the most from their car know that in the rigors of competition you need to extract every ounce of performance from your machine. You need the capability to have every degree of adjustment above and beyond that of a street driven vehicle. You need the strength to withstands the stresses and strains of hard corners, a rough course and brutal weight transfer and chassis flex.\u003cbr\u003e \u003cbr\u003e It s within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any comptition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.\u003cbr\u003e \u003cbr\u003e These Inner Tie Rods are constructed of a durable steel alloy which is much stronger that the OEM pieces that have a tendency to bend and break. With the spacer built into their knuckle, they allow the steering rack more travel to achieve the highest possible angle.\u003cbr\u003e \u003cbr\u003e -Will fit 89-94 180SX\/240SX and JDM Silvia (S13)\u003cbr\u003e -Much stronger than OEM pieces which often break and bend.\u003cbr\u003e -Increases steering angle to achieve a better more stable drift.\u003c\/p\u003e"}

$96.47

Megan Racing Rear Roll Center Adjuster for Nissan 240SX 89-94 S13 MRS-NS-1751

Megan Racing Rear Roll Center Adjuster for Nissan 240SX 89-94 - MRS-NS-1751The 240SX/Silvia is a...

Megan Racing Rear Roll Center Adjuster for Nissan 240SX 89-94 - MRS-NS-1751The 240SX/Silvia is an amazing platform in all it s generations. The FR-Drive-train and it s light weight offer a perfect balance between speed and agility. Used in a wide range of motor-sports such as drag, drift, autocross, road race and even rally the 240SX has proven it s worth time and time again. As a street car, it s refined and well mannered, comfortable to drive in and stylish with a bit of aggression in it ...

{"id":7507250479262,"title":"Megan Racing Rear Roll Center Adjuster for Nissan 240SX 89-94 S13 MRS-NS-1751","handle":"megan-racing-rear-roll-center-adjuster-for-nissan-240sx-89-94-s13","description":"Megan Racing Rear Roll Center Adjuster for Nissan 240SX 89-94 - MRS-NS-1751\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 240SX\/Silvia is an amazing platform in all it s generations. The FR-Drive-train and it s light weight offer a perfect balance between speed and agility. Used in a wide range of motor-sports such as drag, drift, autocross, road race and even rally the 240SX has proven it s worth time and time again.\u003cbr\u003e \u003cbr\u003e As a street car, it s refined and well mannered, comfortable to drive in and stylish with a bit of aggression in it s curves. Although it s initial design was sporty and aggressive it was still designed as a street car.\u003cbr\u003e \u003cbr\u003e Those who seek the most from their car know that in the rigors of competition you need to extract every ounce of performance from your machine. You need the capability to have every degree of adjustment above and beyond that of a street driven vehicle. You need the strength to withstands the stresses and strains of hard corners, a rough course and brutal weight transfer and chassis flex.\u003cbr\u003e \u003cbr\u003e It is within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any competition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.\u003cbr\u003e \u003cbr\u003e These Roll-Center adapters are installed to correct suspension geometry after a car has been lowered. The uneven length of suspension arms causes Toe adjustments to occur drastically during braking suspension \"squat\", these Roll-Center Adjusters make up for the travel in the suspension arms to return suspension geometry to it's correct starting point. This allows alignment and steering to remain more consistent and predictable during aggressive driving and competition.\u003cbr\u003e \u003cbr\u003e ROLL CENTER INFORMATION:\u003cbr\u003e \u003cbr\u003e Front roll center is determined by the angle of the lower control arms and the angle of the upper strut mounting points. These angles, drawn in space, determine the instant centers for the front suspension (instant centers are the points that the entire suspension moves around during body roll). Then take a line from each instant center to the middle of the tire tread on the opposite side, and where these lines intersect, there is your roll center.\u003cbr\u003e \u003cbr\u003e Rear roll center is determined by the use of the angles of the upper and lower control arms to determine the instant centers of the suspension. Then, just like the front, take a line from each instant center to the middle of the tire tread on the opposite sides. The intersection is your roll center.\u003cbr\u003e \u003cbr\u003e Roll center angles must be measured from pivot point to pivot point. Modifying merely the angle of the arm doesn't do anything at all. Most of the \"RCA\" ball joints don't do anything besides move your arms closer to the ground.\u003cbr\u003e [RCA description credit to Andrew Adriance]\u003cbr\u003e \u003cbr\u003e NOTE: Due to the complexity of the installation, professional installation is REQUIRED!\u003cbr\u003e \u003cbr\u003e Application: 1989-1994 Nissan 240SX\/180SX\/Silvia (S13)e\u003c\/p\u003e","published_at":"2023-07-01T08:50:08-07:00","created_at":"2023-07-01T08:17:27-07:00","vendor":"VEX Motorsports","type":"Other","tags":["Suspension Arms"],"price":13088,"price_min":13088,"price_max":13088,"available":true,"price_varies":false,"compare_at_price":13500,"compare_at_price_min":13500,"compare_at_price_max":13500,"compare_at_price_varies":false,"variants":[{"id":42646445031582,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MRS-NS-1751","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Megan Racing Rear Roll Center Adjuster for Nissan 240SX 89-94 S13 MRS-NS-1751","public_title":null,"options":["Default Title"],"price":13088,"weight":907,"compare_at_price":13500,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"continue","barcode":"788536933602","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1751-1.jpg?v=1688226091"],"featured_image":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1751-1.jpg?v=1688226091","options":["Title"],"media":[{"alt":null,"id":28449793278110,"position":1,"preview_image":{"aspect_ratio":1.25,"height":720,"width":900,"src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1751-1.jpg?v=1688226091"},"aspect_ratio":1.25,"height":720,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1751-1.jpg?v=1688226091","width":900}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Megan Racing Rear Roll Center Adjuster for Nissan 240SX 89-94 - MRS-NS-1751\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 240SX\/Silvia is an amazing platform in all it s generations. The FR-Drive-train and it s light weight offer a perfect balance between speed and agility. Used in a wide range of motor-sports such as drag, drift, autocross, road race and even rally the 240SX has proven it s worth time and time again.\u003cbr\u003e \u003cbr\u003e As a street car, it s refined and well mannered, comfortable to drive in and stylish with a bit of aggression in it s curves. Although it s initial design was sporty and aggressive it was still designed as a street car.\u003cbr\u003e \u003cbr\u003e Those who seek the most from their car know that in the rigors of competition you need to extract every ounce of performance from your machine. You need the capability to have every degree of adjustment above and beyond that of a street driven vehicle. You need the strength to withstands the stresses and strains of hard corners, a rough course and brutal weight transfer and chassis flex.\u003cbr\u003e \u003cbr\u003e It is within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any competition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.\u003cbr\u003e \u003cbr\u003e These Roll-Center adapters are installed to correct suspension geometry after a car has been lowered. The uneven length of suspension arms causes Toe adjustments to occur drastically during braking suspension \"squat\", these Roll-Center Adjusters make up for the travel in the suspension arms to return suspension geometry to it's correct starting point. This allows alignment and steering to remain more consistent and predictable during aggressive driving and competition.\u003cbr\u003e \u003cbr\u003e ROLL CENTER INFORMATION:\u003cbr\u003e \u003cbr\u003e Front roll center is determined by the angle of the lower control arms and the angle of the upper strut mounting points. These angles, drawn in space, determine the instant centers for the front suspension (instant centers are the points that the entire suspension moves around during body roll). Then take a line from each instant center to the middle of the tire tread on the opposite side, and where these lines intersect, there is your roll center.\u003cbr\u003e \u003cbr\u003e Rear roll center is determined by the use of the angles of the upper and lower control arms to determine the instant centers of the suspension. Then, just like the front, take a line from each instant center to the middle of the tire tread on the opposite sides. The intersection is your roll center.\u003cbr\u003e \u003cbr\u003e Roll center angles must be measured from pivot point to pivot point. Modifying merely the angle of the arm doesn't do anything at all. Most of the \"RCA\" ball joints don't do anything besides move your arms closer to the ground.\u003cbr\u003e [RCA description credit to Andrew Adriance]\u003cbr\u003e \u003cbr\u003e NOTE: Due to the complexity of the installation, professional installation is REQUIRED!\u003cbr\u003e \u003cbr\u003e Application: 1989-1994 Nissan 240SX\/180SX\/Silvia (S13)e\u003c\/p\u003e"}

$130.88 $135.00

Megan Racing Front Roll Center Adjuster for Nissan 240SX 89-94 MRS-NS-1750

Megan Racing Front Roll Center Adjuster for Nissan 240SX 89-94 - MRS-NS-1750The 240SX/Silvia is ...

Megan Racing Front Roll Center Adjuster for Nissan 240SX 89-94 - MRS-NS-1750The 240SX/Silvia is an amazing platform in all it s generations. The FR-Drive-train and it s light weight offer a perfect balance between speed and agility. Used in a wide range of motor-sports such as drag, drift, autocross, road race and even rally the 240SX has proven it s worth time and time again. As a street car, it s refined and well mannered, comfortable to drive in and stylish with a bit of aggression in it...

{"id":7507250512030,"title":"Megan Racing Front Roll Center Adjuster for Nissan 240SX 89-94 MRS-NS-1750","handle":"megan-racing-front-roll-center-adjuster-for-nissan-240sx-89-94","description":"Megan Racing Front Roll Center Adjuster for Nissan 240SX 89-94 - MRS-NS-1750\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 240SX\/Silvia is an amazing platform in all it s generations. The FR-Drive-train and it s light weight offer a perfect balance between speed and agility. Used in a wide range of motor-sports such as drag, drift, autocross, road race and even rally the 240SX has proven it s worth time and time again.\u003cbr\u003e \u003cbr\u003e As a street car, it s refined and well mannered, comfortable to drive in and stylish with a bit of aggression in it s curves. Although it s initial design was sporty and aggressive it was still designed as a street car.\u003cbr\u003e \u003cbr\u003e Those who seek the most from their car know that in the rigors of competition you need to extract every ounce of performance from your machine. You need the capability to have every degree of adjustment above and beyond that of a street driven vehicle. You need the strength to withstands the stresses and strains of hard corners, a rough course and brutal weight transfer and chassis flex.\u003cbr\u003e \u003cbr\u003e It is within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any competition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.\u003cbr\u003e \u003cbr\u003e These Roll-Center adapters are installed to correct suspension geometry after a car has been lowered. The uneven length of suspension arms causes Toe adjustments to occur drastically during braking suspension \"squat\", these Roll-Center Adjusters make up for the travel in the suspension arms to return suspension geometry to it's correct starting point. This allows alignment and steering to remain more consistent and predictable during aggressive driving and competition.\u003cbr\u003e \u003cbr\u003e ROLL CENTER INFORMATION:\u003cbr\u003e \u003cbr\u003e Front roll center is determined by the angle of the lower control arms and the angle of the upper strut mounting points. These angles, drawn in space, determine the instant centers for the front suspension (instant centers are the points that the entire suspension moves around during body roll). Then take a line from each instant center to the middle of the tire tread on the opposite side, and where these lines intersect, there is your roll center.\u003cbr\u003e \u003cbr\u003e Rear roll center is determined by the use of the angles of the upper and lower control arms to determine the instant centers of the suspension. Then, just like the front, take a line from each instant center to the middle of the tire tread on the opposite sides. The intersection is your roll center.\u003cbr\u003e \u003cbr\u003e Roll center angles must be measured from pivot point to pivot point. Modifying merely the angle of the arm doesn't do anything at all. Most of the \"RCA\" ball joints don't do anything besides move your arms closer to the ground.\u003cbr\u003e [RCA description credit to Andrew Adriance]\u003cbr\u003e \u003cbr\u003e NOTE: Due to the complexity of the installation, professional installation is REQUIRED!\u003cbr\u003e \u003cbr\u003e Application: 1989-1994 Nissan 240SX\/180SX\/Silvia (S13)\u003c\/p\u003e","published_at":"2023-07-01T08:50:08-07:00","created_at":"2023-07-01T08:17:27-07:00","vendor":"VEX Motorsports","type":"Other","tags":["Suspension Arms"],"price":13088,"price_min":13088,"price_max":13088,"available":true,"price_varies":false,"compare_at_price":13500,"compare_at_price_min":13500,"compare_at_price_max":13500,"compare_at_price_varies":false,"variants":[{"id":42646445064350,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MRS-NS-1750","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Megan Racing Front Roll Center Adjuster for Nissan 240SX 89-94 MRS-NS-1750","public_title":null,"options":["Default Title"],"price":13088,"weight":1361,"compare_at_price":13500,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"continue","barcode":"788536933596","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1750-1_1.jpg?v=1688226096"],"featured_image":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1750-1_1.jpg?v=1688226096","options":["Title"],"media":[{"alt":null,"id":28449793409182,"position":1,"preview_image":{"aspect_ratio":1.502,"height":666,"width":1000,"src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1750-1_1.jpg?v=1688226096"},"aspect_ratio":1.502,"height":666,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1750-1_1.jpg?v=1688226096","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Megan Racing Front Roll Center Adjuster for Nissan 240SX 89-94 - MRS-NS-1750\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 240SX\/Silvia is an amazing platform in all it s generations. The FR-Drive-train and it s light weight offer a perfect balance between speed and agility. Used in a wide range of motor-sports such as drag, drift, autocross, road race and even rally the 240SX has proven it s worth time and time again.\u003cbr\u003e \u003cbr\u003e As a street car, it s refined and well mannered, comfortable to drive in and stylish with a bit of aggression in it s curves. Although it s initial design was sporty and aggressive it was still designed as a street car.\u003cbr\u003e \u003cbr\u003e Those who seek the most from their car know that in the rigors of competition you need to extract every ounce of performance from your machine. You need the capability to have every degree of adjustment above and beyond that of a street driven vehicle. You need the strength to withstands the stresses and strains of hard corners, a rough course and brutal weight transfer and chassis flex.\u003cbr\u003e \u003cbr\u003e It is within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any competition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.\u003cbr\u003e \u003cbr\u003e These Roll-Center adapters are installed to correct suspension geometry after a car has been lowered. The uneven length of suspension arms causes Toe adjustments to occur drastically during braking suspension \"squat\", these Roll-Center Adjusters make up for the travel in the suspension arms to return suspension geometry to it's correct starting point. This allows alignment and steering to remain more consistent and predictable during aggressive driving and competition.\u003cbr\u003e \u003cbr\u003e ROLL CENTER INFORMATION:\u003cbr\u003e \u003cbr\u003e Front roll center is determined by the angle of the lower control arms and the angle of the upper strut mounting points. These angles, drawn in space, determine the instant centers for the front suspension (instant centers are the points that the entire suspension moves around during body roll). Then take a line from each instant center to the middle of the tire tread on the opposite side, and where these lines intersect, there is your roll center.\u003cbr\u003e \u003cbr\u003e Rear roll center is determined by the use of the angles of the upper and lower control arms to determine the instant centers of the suspension. Then, just like the front, take a line from each instant center to the middle of the tire tread on the opposite sides. The intersection is your roll center.\u003cbr\u003e \u003cbr\u003e Roll center angles must be measured from pivot point to pivot point. Modifying merely the angle of the arm doesn't do anything at all. Most of the \"RCA\" ball joints don't do anything besides move your arms closer to the ground.\u003cbr\u003e [RCA description credit to Andrew Adriance]\u003cbr\u003e \u003cbr\u003e NOTE: Due to the complexity of the installation, professional installation is REQUIRED!\u003cbr\u003e \u003cbr\u003e Application: 1989-1994 Nissan 240SX\/180SX\/Silvia (S13)\u003c\/p\u003e"}

$130.88 $135.00

Megan Racing Rear Toe Control Arm for Mazda CX5 12-16 MRS-MZ-1670

Megan Racing Rear Toe Control Arm for Mazda CX5 12-16 - MRS-MZ-1670Car alignment is absolutely cr...

Megan Racing Rear Toe Control Arm for Mazda CX5 12-16 - MRS-MZ-1670Car alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under steer, over steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to ...

{"id":7507250413726,"title":"Megan Racing Rear Toe Control Arm for Mazda CX5 12-16 MRS-MZ-1670","handle":"megan-racing-rear-toe-control-arm-for-mazda-cx5-12-16","description":"Megan Racing Rear Toe Control Arm for Mazda CX5 12-16 - MRS-MZ-1670\u003cbr\u003e\u003cbr\u003eCar alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under steer, over steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under steer and for optimum tire wear at stock height; under steer is often undesired from a performance standpoint and almost all performance driven applications are lowered.\n\nIt is within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any competition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.\n\nThese Toe-Control arms allow for fine-tuned adjustments to the rear toe in\/out setting of the vehicle. Toe is crucial for the straight line stability and behavior of a car and is said to have more of an effect than the front toe.","published_at":"2023-07-01T08:50:07-07:00","created_at":"2023-07-01T08:17:24-07:00","vendor":"VEX Motorsports","type":"Other","tags":["Suspension Arms"],"price":13941,"price_min":13941,"price_max":13941,"available":true,"price_varies":false,"compare_at_price":14600,"compare_at_price_min":14600,"compare_at_price_max":14600,"compare_at_price_varies":false,"variants":[{"id":42646444966046,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MRS-MZ-1670","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Megan Racing Rear Toe Control Arm for Mazda CX5 12-16 MRS-MZ-1670","public_title":null,"options":["Default Title"],"price":13941,"weight":3175,"compare_at_price":14600,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"continue","barcode":"788536935620","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/files\/mrs-mz-1670-1.jpg?v=1688226090"],"featured_image":"\/\/vexms.com\/cdn\/shop\/files\/mrs-mz-1670-1.jpg?v=1688226090","options":["Title"],"media":[{"alt":null,"id":28449793245342,"position":1,"preview_image":{"aspect_ratio":1.502,"height":666,"width":1000,"src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-mz-1670-1.jpg?v=1688226090"},"aspect_ratio":1.502,"height":666,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-mz-1670-1.jpg?v=1688226090","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Megan Racing Rear Toe Control Arm for Mazda CX5 12-16 - MRS-MZ-1670\u003cbr\u003e\u003cbr\u003eCar alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under steer, over steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under steer and for optimum tire wear at stock height; under steer is often undesired from a performance standpoint and almost all performance driven applications are lowered.\n\nIt is within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any competition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.\n\nThese Toe-Control arms allow for fine-tuned adjustments to the rear toe in\/out setting of the vehicle. Toe is crucial for the straight line stability and behavior of a car and is said to have more of an effect than the front toe."}

$139.41 $146.00

Megan Racing Rear Subframe Bushings for Nissan 240sx/Skyline (2wd Only) MRS-NS-1706

Megan Racing Rear Subframe Bushing - MRS-NS-1706Applications: Nissan Silvia/240SX: S13, S14, S15 ...

Megan Racing Rear Subframe Bushing - MRS-NS-1706Applications: Nissan Silvia/240SX: S13, S14, S15 Nissan Skyline: R32, R33, R34 (2WD models only) -More response to the driver - Less Wheel Hop - Improved traction - Maintains excellent hardness in bushing without the noise produced from road and differentials that aluminum bushings cannot suppress - Package comes with 4 harden rubbers - 150% Harder that stock bushings - Made with high-strength and anti-cracking rubber material - Rubber v...

{"id":7507250315422,"title":"Megan Racing Rear Subframe Bushings for Nissan 240sx\/Skyline (2wd Only) MRS-NS-1706","handle":"megan-racing-rear-subframe-bushings-for-nissan-240sx-skyline-2wd-only","description":"Megan Racing Rear Subframe Bushing - MRS-NS-1706\u003cbr\u003e\u003cbr\u003e\u003cp\u003eApplications:\u003cbr\u003e Nissan Silvia\/240SX: S13, S14, S15\u003cbr\u003e Nissan Skyline: R32, R33, R34 (2WD models only)\u003cbr\u003e \u003cbr\u003e -More response to the driver\u003cbr\u003e \u003cbr\u003e - Less Wheel Hop\u003cbr\u003e \u003cbr\u003e - Improved traction\u003cbr\u003e \u003cbr\u003e - Maintains excellent hardness in bushing without the noise produced from road and differentials that aluminum bushings cannot suppress\u003cbr\u003e \u003cbr\u003e - Package comes with 4 harden rubbers\u003cbr\u003e \u003cbr\u003e - 150% Harder that stock bushings\u003cbr\u003e \u003cbr\u003e - Made with high-strength and anti-cracking rubber material\u003cbr\u003e \u003cbr\u003e - Rubber viscosity is around 2000KGS\u003cbr\u003e \u003cbr\u003e -Installation Level:\u003cbr\u003e Advance\u003cbr\u003e \u003cbr\u003e NOTE: Will require a PRESS to install on to the sub frame. \u003c\/p\u003e","published_at":"2023-07-01T08:50:07-07:00","created_at":"2023-07-01T08:17:24-07:00","vendor":"VEX Motorsports","type":"Other","tags":["Suspension Arms"],"price":14294,"price_min":14294,"price_max":14294,"available":true,"price_varies":false,"compare_at_price":15100,"compare_at_price_min":15100,"compare_at_price_max":15100,"compare_at_price_varies":false,"variants":[{"id":42646444900510,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MRS-NS-1706","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Megan Racing Rear Subframe Bushings for Nissan 240sx\/Skyline (2wd Only) MRS-NS-1706","public_title":null,"options":["Default Title"],"price":14294,"weight":2722,"compare_at_price":15100,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"788536933503","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1706-1_1.jpg?v=1688226090"],"featured_image":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1706-1_1.jpg?v=1688226090","options":["Title"],"media":[{"alt":null,"id":28449793179806,"position":1,"preview_image":{"aspect_ratio":1.502,"height":666,"width":1000,"src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1706-1_1.jpg?v=1688226090"},"aspect_ratio":1.502,"height":666,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1706-1_1.jpg?v=1688226090","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Megan Racing Rear Subframe Bushing - MRS-NS-1706\u003cbr\u003e\u003cbr\u003e\u003cp\u003eApplications:\u003cbr\u003e Nissan Silvia\/240SX: S13, S14, S15\u003cbr\u003e Nissan Skyline: R32, R33, R34 (2WD models only)\u003cbr\u003e \u003cbr\u003e -More response to the driver\u003cbr\u003e \u003cbr\u003e - Less Wheel Hop\u003cbr\u003e \u003cbr\u003e - Improved traction\u003cbr\u003e \u003cbr\u003e - Maintains excellent hardness in bushing without the noise produced from road and differentials that aluminum bushings cannot suppress\u003cbr\u003e \u003cbr\u003e - Package comes with 4 harden rubbers\u003cbr\u003e \u003cbr\u003e - 150% Harder that stock bushings\u003cbr\u003e \u003cbr\u003e - Made with high-strength and anti-cracking rubber material\u003cbr\u003e \u003cbr\u003e - Rubber viscosity is around 2000KGS\u003cbr\u003e \u003cbr\u003e -Installation Level:\u003cbr\u003e Advance\u003cbr\u003e \u003cbr\u003e NOTE: Will require a PRESS to install on to the sub frame. \u003c\/p\u003e"}

$142.94 $151.00

Megan Racing Reinforced Front Stabilizer Link Kit for Nissan 240sx S13/S14 MRS-NS-1740

Megan Racing Engine Mounts - MRS-NS-1740The 240SX/Silvia is an amazing platform in all it s gener...

Megan Racing Engine Mounts - MRS-NS-1740The 240SX/Silvia is an amazing platform in all it s generations. The FR-Drivetrain and it s light weight offer a perfect balance between speed and agility. Used in a wide range of motorsports such as drag, drift, autocross, road race and even rally the 240SX has proven it s worth time and time again. As a street car, it s refined and well mannered, comfortable to drive in and stylish with a bit of aggression in it s curves. Although the initial design ...

{"id":7507250348190,"title":"Megan Racing Reinforced Front Stabilizer Link Kit for Nissan 240sx S13\/S14 MRS-NS-1740","handle":"megan-racing-reinforced-front-stabilizer-link-kit-for-nissan-240sx-s13-s14","description":"Megan Racing Engine Mounts - MRS-NS-1740\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 240SX\/Silvia is an amazing platform in all it s generations. The FR-Drivetrain and it s light weight offer a perfect balance between speed and agility. Used in a wide range of motorsports such as drag, drift, autocross, road race and even rally the 240SX has proven it s worth time and time again.\u003cbr\u003e \u003cbr\u003e As a street car, it s refined and well mannered, comfortable to drive in and stylish with a bit of aggression in it s curves. Although the initial design was sporty and aggressive it was still designed as a street car and comfort was a priority with soft rubber bushings all around to absorb vibration.\u003cbr\u003e \u003cbr\u003e Through the years the soft rubber bushings deteriorate after constant flexing and vibration as well as being punished through weathering; this can cause them to tear and may seriously damage your engine and transmission. Megan Racing has developed a Hard-Rubber\/Polyurethane motor mounts for the 240SX Chassis that will fit the KA24E, KA24DE and SR20DET powerplants. These reinforced mounts are perfect for the enthusiast who is looking to get the most from their 240SX as they will allow more energy to be transfered to the wheels instead of absorbing the energy into the soft rubber.\u003cbr\u003e \u003cbr\u003e Application:\u003cbr\u003e 1989-1994 Nissan 240sx\u003cbr\u003e 1995-1998 Nissan 240sX\u003cbr\u003e \u003cbr\u003e Motors:\u003cbr\u003e KA24E (SOHC-S13)\u003cbr\u003e KA24DE (DOHC-S13\/S14)\u003cbr\u003e SR20DET (DOHC-S13\/S14)\u003c\/p\u003e","published_at":"2023-07-01T08:50:07-07:00","created_at":"2023-07-01T08:17:24-07:00","vendor":"VEX Motorsports","type":"Other","tags":["Suspension Arms"],"price":17868,"price_min":17868,"price_max":17868,"available":true,"price_varies":false,"compare_at_price":19750,"compare_at_price_min":19750,"compare_at_price_max":19750,"compare_at_price_varies":false,"variants":[{"id":42646444933278,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MRS-NS-1740","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Megan Racing Reinforced Front Stabilizer Link Kit for Nissan 240sx S13\/S14 MRS-NS-1740","public_title":null,"options":["Default Title"],"price":17868,"weight":4536,"compare_at_price":19750,"inventory_quantity":50,"inventory_management":"shopify","inventory_policy":"continue","barcode":"788536933572","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1740-1_1.jpg?v=1688226090"],"featured_image":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1740-1_1.jpg?v=1688226090","options":["Title"],"media":[{"alt":null,"id":28449793212574,"position":1,"preview_image":{"aspect_ratio":1.502,"height":666,"width":1000,"src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1740-1_1.jpg?v=1688226090"},"aspect_ratio":1.502,"height":666,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/files\/mrs-ns-1740-1_1.jpg?v=1688226090","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Megan Racing Engine Mounts - MRS-NS-1740\u003cbr\u003e\u003cbr\u003e\u003cp\u003eThe 240SX\/Silvia is an amazing platform in all it s generations. The FR-Drivetrain and it s light weight offer a perfect balance between speed and agility. Used in a wide range of motorsports such as drag, drift, autocross, road race and even rally the 240SX has proven it s worth time and time again.\u003cbr\u003e \u003cbr\u003e As a street car, it s refined and well mannered, comfortable to drive in and stylish with a bit of aggression in it s curves. Although the initial design was sporty and aggressive it was still designed as a street car and comfort was a priority with soft rubber bushings all around to absorb vibration.\u003cbr\u003e \u003cbr\u003e Through the years the soft rubber bushings deteriorate after constant flexing and vibration as well as being punished through weathering; this can cause them to tear and may seriously damage your engine and transmission. Megan Racing has developed a Hard-Rubber\/Polyurethane motor mounts for the 240SX Chassis that will fit the KA24E, KA24DE and SR20DET powerplants. These reinforced mounts are perfect for the enthusiast who is looking to get the most from their 240SX as they will allow more energy to be transfered to the wheels instead of absorbing the energy into the soft rubber.\u003cbr\u003e \u003cbr\u003e Application:\u003cbr\u003e 1989-1994 Nissan 240sx\u003cbr\u003e 1995-1998 Nissan 240sX\u003cbr\u003e \u003cbr\u003e Motors:\u003cbr\u003e KA24E (SOHC-S13)\u003cbr\u003e KA24DE (DOHC-S13\/S14)\u003cbr\u003e SR20DET (DOHC-S13\/S14)\u003c\/p\u003e"}

$178.68 $197.50

49 – 56 product(s) of 1610