Axles & Driveshafts

Sort products:

Show:

DRIVESHAFT SHOP 1PC CARBON FIBER CV SHAFT FOR AUTO 15-16 MUSTANG GT FDSH44-C

So the 2015 Mustang now has an independent rear suspension (IRS) and the driveshaft is a litt...

So the 2015 Mustang now has an independent rear suspension (IRS) and the driveshaft is a little different than the S197 cars. Although the factory one is still a 2 piece shaft, they are different in configuration. Automatic uses a 4-bolt flange on the back of the trans but the Manual's (all of them) have a Guibo. What is a Guibo? its a rubber doughnut coupler like ones used in most European cars. They're put on to make the drivetrain smoother and more soft. But lets face it, soft in a per...

{"id":10514747912,"title":"DRIVESHAFT SHOP 1PC CARBON FIBER CV SHAFT FOR AUTO 15-16 MUSTANG GT FDSH44-C","handle":"fdsh44-c","description":"\u003cdiv class=\"std\"\u003e\n So the 2015 Mustang now has an independent rear suspension (IRS) and the driveshaft is a little different than the S197 cars. Although the factory one is still a 2 piece shaft, they are different in configuration. Automatic uses a 4-bolt flange on the back of the trans but the Manual's (all of them) have a Guibo. What is a Guibo? its a rubber doughnut coupler like ones used in most European cars. They're put on to make the drivetrain smoother and more soft. But lets face it, soft in a performance car is well, kinda soft. What we have done is make a billet plate to eliminate the Guibo, then changed that end to a 108mm CV joint. Why does DSS use the CV and not a slider like from a 4x4? The reason is that DSS high-speed balances their driveshafts and found out years ago that the CV is more stable and less likely to have Harmonic issues. Also the CV will have a much higher critical speed then a male\/female slider. We here at DSS have become a leading force in using CV's on Driveshafts in the aftermarket and have come a long way with how they are made and used. What's great about this car being IRS is that there are no issues with angles, adjustable arms or ride height issues that can affect the drivetrain. The Carbon fiber driveshaft will give more of a torsional twist but with out the harmful reverse snap given from steel. The aluminum is about half between steel and carbon fiber. This will not only reduce harmonics but also help with 60ft times (aluminum will also be superior over the stock steel 2 piece). And the ends are either Billet or Forged, we never use inexpensive cast parts in our shafts.\u003cbr\u003e\n \u003cbr\u003e\n So there you have it, the new 2015 Mustang shafts from DSS.\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eFDSH44-C\u003c\/span\u003e\n\u003c\/h4\u003e","published_at":"2017-08-16T01:53:31-07:00","created_at":"2017-08-16T01:53:32-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Ford"],"price":129999,"price_min":129999,"price_max":129999,"available":true,"price_varies":false,"compare_at_price":129999,"compare_at_price_min":129999,"compare_at_price_max":129999,"compare_at_price_varies":false,"variants":[{"id":43740224712,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssFDSH44-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC CARBON FIBER CV SHAFT FOR AUTO 15-16 MUSTANG GT FDSH44-C","public_title":null,"options":["Default Title"],"price":129999,"weight":32,"compare_at_price":129999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/vexms.com\/cdn\/shop\/products\/gmg8sh2-c-cv.jpg?v=1676452168"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/gmg8sh2-c-cv.jpg?v=1676452168","options":["Title"],"media":[{"alt":null,"id":27890067636382,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/gmg8sh2-c-cv.jpg?v=1676452168"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/gmg8sh2-c-cv.jpg?v=1676452168","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"std\"\u003e\n So the 2015 Mustang now has an independent rear suspension (IRS) and the driveshaft is a little different than the S197 cars. Although the factory one is still a 2 piece shaft, they are different in configuration. Automatic uses a 4-bolt flange on the back of the trans but the Manual's (all of them) have a Guibo. What is a Guibo? its a rubber doughnut coupler like ones used in most European cars. They're put on to make the drivetrain smoother and more soft. But lets face it, soft in a performance car is well, kinda soft. What we have done is make a billet plate to eliminate the Guibo, then changed that end to a 108mm CV joint. Why does DSS use the CV and not a slider like from a 4x4? The reason is that DSS high-speed balances their driveshafts and found out years ago that the CV is more stable and less likely to have Harmonic issues. Also the CV will have a much higher critical speed then a male\/female slider. We here at DSS have become a leading force in using CV's on Driveshafts in the aftermarket and have come a long way with how they are made and used. What's great about this car being IRS is that there are no issues with angles, adjustable arms or ride height issues that can affect the drivetrain. The Carbon fiber driveshaft will give more of a torsional twist but with out the harmful reverse snap given from steel. The aluminum is about half between steel and carbon fiber. This will not only reduce harmonics but also help with 60ft times (aluminum will also be superior over the stock steel 2 piece). And the ends are either Billet or Forged, we never use inexpensive cast parts in our shafts.\u003cbr\u003e\n \u003cbr\u003e\n So there you have it, the new 2015 Mustang shafts from DSS.\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eFDSH44-C\u003c\/span\u003e\n\u003c\/h4\u003e"}

$1,299.99

DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 6SPD 2015 MUSTANG SHELBY

Product Description The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Pi...

Product Description The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts 1.1350 front u-joint with flange to mount up to the transmission 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues. 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft 4. Custom modified High Speed 108mm CV with special ...

{"id":10514747784,"title":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 6SPD 2015 MUSTANG SHELBY","handle":"fdsh10-c-cv","description":"\u003cdiv class=\"std\"\u003e\n \u003ch3\u003e\n Product Description\u003c\/h3\u003e\n The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts\u003cbr\u003e\n \u003cbr\u003e\n 1.1350 front u-joint with flange to mount up to the transmission\u003cbr\u003e\n 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.\u003cbr\u003e\n 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft\u003cbr\u003e\n 4. Custom modified High Speed 108mm CV with special boot and grease.\u003cbr\u003e\n 5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version\u003cbr\u003e\n 6. All Hardware included\u003cbr\u003e\n 7. 1 Year Warranty\u003cbr\u003e\n 8. 900HP Rated\u003cbr\u003e\n 9. Balanced on one of the most sophisticated balancing machines in the industry.\u003cbr\u003e\n 10. with the CV in the rear there is no need to change pinion angle on lowered cars.\u003cbr\u003e\n 11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.\u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e","published_at":"2017-08-16T01:53:30-07:00","created_at":"2017-08-16T01:53:31-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Ford"],"price":124999,"price_min":124999,"price_max":124999,"available":true,"price_varies":false,"compare_at_price":124999,"compare_at_price_min":124999,"compare_at_price_max":124999,"compare_at_price_varies":false,"variants":[{"id":43740224584,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssFDSH10-C-CV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 6SPD 2015 MUSTANG SHELBY","public_title":null,"options":["Default Title"],"price":124999,"weight":32,"compare_at_price":124999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_4354d1ef-b341-4f02-aa13-e97671c45167.jpg?v=1676473758"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_4354d1ef-b341-4f02-aa13-e97671c45167.jpg?v=1676473758","options":["Title"],"media":[{"alt":null,"id":27893097857182,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_4354d1ef-b341-4f02-aa13-e97671c45167.jpg?v=1676473758"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_4354d1ef-b341-4f02-aa13-e97671c45167.jpg?v=1676473758","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"std\"\u003e\n \u003ch3\u003e\n Product Description\u003c\/h3\u003e\n The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts\u003cbr\u003e\n \u003cbr\u003e\n 1.1350 front u-joint with flange to mount up to the transmission\u003cbr\u003e\n 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.\u003cbr\u003e\n 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft\u003cbr\u003e\n 4. Custom modified High Speed 108mm CV with special boot and grease.\u003cbr\u003e\n 5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version\u003cbr\u003e\n 6. All Hardware included\u003cbr\u003e\n 7. 1 Year Warranty\u003cbr\u003e\n 8. 900HP Rated\u003cbr\u003e\n 9. Balanced on one of the most sophisticated balancing machines in the industry.\u003cbr\u003e\n 10. with the CV in the rear there is no need to change pinion angle on lowered cars.\u003cbr\u003e\n 11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.\u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e"}

$1,249.99

DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 2011-2014 MUSTANG GT/BOSS 302

Product Description The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piec...

{"id":10514747656,"title":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 2011-2014 MUSTANG GT\/BOSS 302","handle":"fdsh22-c-cv","description":"\u003ch3\u003e\n Product Description\u003c\/h3\u003e\n \u003cp\u003e\n The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts\u003cbr\u003e\n \u003cbr\u003e\n 1.1350 front u-joint with flange to mount up to the transmission\u003cbr\u003e\n 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.\u003cbr\u003e\n 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft\u003cbr\u003e\n 4. Custom modified High Speed 108mm CV with special boot and grease.\u003cbr\u003e\n 5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version\u003cbr\u003e\n 6. All Hardware included\u003cbr\u003e\n 7. 1 Year Warranty\u003cbr\u003e\n 8. 900HP Rated\u003cbr\u003e\n 9. Balanced on one of the most sophisticated balancing machines in the industry.\u003cbr\u003e\n 10. with the CV in the rear there is no need to change pinion angle on lowered cars.\u003cbr\u003e\n 11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.\u003c\/p\u003e","published_at":"2017-08-16T01:53:28-07:00","created_at":"2017-08-16T01:53:30-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Ford"],"price":124999,"price_min":124999,"price_max":124999,"available":true,"price_varies":false,"compare_at_price":124999,"compare_at_price_min":124999,"compare_at_price_max":124999,"compare_at_price_varies":false,"variants":[{"id":43740224392,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssFDSH22-C-CV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 2011-2014 MUSTANG GT\/BOSS 302","public_title":null,"options":["Default Title"],"price":124999,"weight":32,"compare_at_price":124999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_bc0cf097-389a-4381-8516-7f6aa16bdc18.jpg?v=1676473621"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_bc0cf097-389a-4381-8516-7f6aa16bdc18.jpg?v=1676473621","options":["Title"],"media":[{"alt":null,"id":27893087338654,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_bc0cf097-389a-4381-8516-7f6aa16bdc18.jpg?v=1676473621"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_bc0cf097-389a-4381-8516-7f6aa16bdc18.jpg?v=1676473621","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e\n Product Description\u003c\/h3\u003e\n \u003cp\u003e\n The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts\u003cbr\u003e\n \u003cbr\u003e\n 1.1350 front u-joint with flange to mount up to the transmission\u003cbr\u003e\n 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.\u003cbr\u003e\n 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft\u003cbr\u003e\n 4. Custom modified High Speed 108mm CV with special boot and grease.\u003cbr\u003e\n 5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version\u003cbr\u003e\n 6. All Hardware included\u003cbr\u003e\n 7. 1 Year Warranty\u003cbr\u003e\n 8. 900HP Rated\u003cbr\u003e\n 9. Balanced on one of the most sophisticated balancing machines in the industry.\u003cbr\u003e\n 10. with the CV in the rear there is no need to change pinion angle on lowered cars.\u003cbr\u003e\n 11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.\u003c\/p\u003e"}

$1,249.99

DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESAHFT W/CV FOR 05-10 MUSTANG GT

The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts ...

The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts 1.1350 front u-joint with flange to mount up to the transmission 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues. 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft 4. Custom modified High Speed 108mm CV with special boot and grease. 5. Custo...

{"id":10514747464,"title":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESAHFT W\/CV FOR 05-10 MUSTANG GT","handle":"fdsh9-c-cv","description":"\u003cp\u003e\n The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts\u003cbr\u003e\n \u003cbr\u003e\n 1.1350 front u-joint with flange to mount up to the transmission\u003cbr\u003e\n 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.\u003cbr\u003e\n 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft\u003cbr\u003e\n 4. Custom modified High Speed 108mm CV with special boot and grease.\u003cbr\u003e\n 5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version\u003cbr\u003e\n 6. All Hardware included\u003cbr\u003e\n 7. 1 Year Warranty\u003cbr\u003e\n 8. 900HP Rated\u003cbr\u003e\n 9. Balanced on one of the most sophisticated balancing machines in the industry.\u003cbr\u003e\n 10. with the CV in the rear there is no need to change pinion angle on lowered cars.\u003cbr\u003e\n 11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.\u003c\/p\u003e","published_at":"2017-08-16T01:53:27-07:00","created_at":"2017-08-16T01:53:28-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Ford"],"price":124999,"price_min":124999,"price_max":124999,"available":true,"price_varies":false,"compare_at_price":124999,"compare_at_price_min":124999,"compare_at_price_max":124999,"compare_at_price_varies":false,"variants":[{"id":43740224200,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssFDSH9-C-CV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESAHFT W\/CV FOR 05-10 MUSTANG GT","public_title":null,"options":["Default Title"],"price":124999,"weight":32,"compare_at_price":124999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_74f5fa68-07b3-47ea-95c5-b9ee2e42883d.jpg?v=1676473701"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_74f5fa68-07b3-47ea-95c5-b9ee2e42883d.jpg?v=1676473701","options":["Title"],"media":[{"alt":null,"id":27893093695646,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_74f5fa68-07b3-47ea-95c5-b9ee2e42883d.jpg?v=1676473701"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_74f5fa68-07b3-47ea-95c5-b9ee2e42883d.jpg?v=1676473701","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\n The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts\u003cbr\u003e\n \u003cbr\u003e\n 1.1350 front u-joint with flange to mount up to the transmission\u003cbr\u003e\n 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.\u003cbr\u003e\n 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft\u003cbr\u003e\n 4. Custom modified High Speed 108mm CV with special boot and grease.\u003cbr\u003e\n 5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version\u003cbr\u003e\n 6. All Hardware included\u003cbr\u003e\n 7. 1 Year Warranty\u003cbr\u003e\n 8. 900HP Rated\u003cbr\u003e\n 9. Balanced on one of the most sophisticated balancing machines in the industry.\u003cbr\u003e\n 10. with the CV in the rear there is no need to change pinion angle on lowered cars.\u003cbr\u003e\n 11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.\u003c\/p\u003e"}

$1,249.99

DRIVESHAFT SHOP DIRECT BOLT IN REAR AXLE FOR 13-15 SCION FRS/BRZ

THIS IS FOR A SINGLE AXLEDRIVESHAFT SHOP DIRECT BOLT IN REAR AXLE FOR 13-15 SCION FRS/BRZ

$499.99 $540.00

DRIVESHAFT SHOP OUTER RACE UPGRADE FOR 93-95 RX7 W/8.8 CONVERSION MZFD16

This is our Rear Axle Bar Upgrade for the RX-7 with the Ford 8.8 rear conversion. The outer C...

This is our Rear Axle Bar Upgrade for the RX-7 with the Ford 8.8 rear conversion. The outer CV on these cars are made from a jis spec material close to our 4130 chromoly, and the OEM 03-04 Cobra inner CV's are forged cromoly. What we have done is made a set of 36 spline center bars and chromoly outer races to convert the factory RX-7 outer to 36 spline internals. The center bars are made from aerospace grade material with our special heat-treat and double temper, rolled splines for extra ...

{"id":10514747272,"title":"DRIVESHAFT SHOP OUTER RACE UPGRADE FOR 93-95 RX7 W\/8.8 CONVERSION MZFD16","handle":"mzfd16","description":"\u003cp\u003e\n This is our Rear Axle Bar Upgrade for the RX-7 with the Ford 8.8 rear conversion. The outer CV on these cars are made from a jis spec material close to our 4130 chromoly, and the OEM 03-04 Cobra inner CV's are forged cromoly. What we have done is made a set of 36 spline center bars and chromoly outer races to convert the factory RX-7 outer to 36 spline internals. The center bars are made from aerospace grade material with our special heat-treat and double temper, rolled splines for extra strength, de-stressed and ready to install. This set includes bars, outer races, boots, clamps and grease.\u003cbr\u003e\n \u003cbr\u003e\n Please note: This bar kit will use OEM 03-04 Cobra inner cv and tripod and will not work with the earlier Cobra inners.\u003c\/p\u003e","published_at":"2017-08-16T01:53:25-07:00","created_at":"2017-08-16T01:53:26-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Mazda"],"price":59999,"price_min":59999,"price_max":59999,"available":true,"price_varies":false,"compare_at_price":63000,"compare_at_price_min":63000,"compare_at_price_max":63000,"compare_at_price_varies":false,"variants":[{"id":43740223944,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssMZFD16","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP OUTER RACE UPGRADE FOR 93-95 RX7 W\/8.8 CONVERSION MZFD16","public_title":null,"options":["Default Title"],"price":59999,"weight":32,"compare_at_price":63000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/vexms.com\/cdn\/shop\/products\/outer-drive-shaft-flange.jpg?v=1676452146"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/outer-drive-shaft-flange.jpg?v=1676452146","options":["Title"],"media":[{"alt":null,"id":27890066063518,"position":1,"preview_image":{"aspect_ratio":1.493,"height":670,"width":1000,"src":"\/\/vexms.com\/cdn\/shop\/products\/outer-drive-shaft-flange.jpg?v=1676452146"},"aspect_ratio":1.493,"height":670,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/outer-drive-shaft-flange.jpg?v=1676452146","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\n This is our Rear Axle Bar Upgrade for the RX-7 with the Ford 8.8 rear conversion. The outer CV on these cars are made from a jis spec material close to our 4130 chromoly, and the OEM 03-04 Cobra inner CV's are forged cromoly. What we have done is made a set of 36 spline center bars and chromoly outer races to convert the factory RX-7 outer to 36 spline internals. The center bars are made from aerospace grade material with our special heat-treat and double temper, rolled splines for extra strength, de-stressed and ready to install. This set includes bars, outer races, boots, clamps and grease.\u003cbr\u003e\n \u003cbr\u003e\n Please note: This bar kit will use OEM 03-04 Cobra inner cv and tripod and will not work with the earlier Cobra inners.\u003c\/p\u003e"}

$599.99 $630.00

DRIVESHAFT SHOP LEVEL 4 RIGHT AXLE FOR 10-14 CAMARO V8

THIS IS FOR A SINGLE AXLE 1. New Anti-Wheel hop design with re-engineered thick bar ...

THIS IS FOR A SINGLE AXLE 1. New Anti-Wheel hop design with re-engineered thick bar 2. 108mm CV's on both ends for longer life 3. 300M center bars (from material out of Sweden) 4. Rated at 1000HP 5. Special grease use in conjunction with harder internal designed especially for the Camaro's unique axle angle. 6. E-coated housings and powder coated bars for superior corrosion protection 7. 1 year warranty 8. great for Daily driven and road ...

{"id":10514747080,"title":"DRIVESHAFT SHOP LEVEL 4 RIGHT AXLE FOR 10-14 CAMARO V8","handle":"ra5425x4","description":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n 1. New Anti-Wheel hop design with re-engineered thick bar\u003cbr\u003e\n \u003cbr\u003e\n 2. 108mm CV's on both ends for longer life\u003cbr\u003e\n \u003cbr\u003e\n 3. 300M center bars (from material out of Sweden)\u003cbr\u003e\n \u003cbr\u003e\n 4. Rated at 1000HP\u003cbr\u003e\n \u003cbr\u003e\n 5. Special grease use in conjunction with harder internal designed especially for the Camaro's unique axle angle.\u003cbr\u003e\n \u003cbr\u003e\n 6. E-coated housings and powder coated bars for superior corrosion protection\u003cbr\u003e\n \u003cbr\u003e\n 7. 1 year warranty\u003cbr\u003e\n \u003cbr\u003e\n 8. great for Daily driven and road course\/circuit cars.\u003c\/p\u003e","published_at":"2017-08-16T01:53:25-07:00","created_at":"2017-08-16T01:53:25-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Chevrolet"],"price":59999,"price_min":59999,"price_max":59999,"available":true,"price_varies":false,"compare_at_price":63000,"compare_at_price_min":63000,"compare_at_price_max":63000,"compare_at_price_varies":false,"variants":[{"id":43740223304,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssRA5425X4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP LEVEL 4 RIGHT AXLE FOR 10-14 CAMARO V8","public_title":null,"options":["Default Title"],"price":59999,"weight":32,"compare_at_price":63000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_f1874906-9495-4dc7-a0be-95a17ce1e1a8.jpg?v=1676457706"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_f1874906-9495-4dc7-a0be-95a17ce1e1a8.jpg?v=1676457706","options":["Title"],"media":[{"alt":null,"id":27890408063134,"position":1,"preview_image":{"aspect_ratio":1.0,"height":218,"width":218,"src":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_f1874906-9495-4dc7-a0be-95a17ce1e1a8.jpg?v=1676457706"},"aspect_ratio":1.0,"height":218,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_f1874906-9495-4dc7-a0be-95a17ce1e1a8.jpg?v=1676457706","width":218}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n 1. New Anti-Wheel hop design with re-engineered thick bar\u003cbr\u003e\n \u003cbr\u003e\n 2. 108mm CV's on both ends for longer life\u003cbr\u003e\n \u003cbr\u003e\n 3. 300M center bars (from material out of Sweden)\u003cbr\u003e\n \u003cbr\u003e\n 4. Rated at 1000HP\u003cbr\u003e\n \u003cbr\u003e\n 5. Special grease use in conjunction with harder internal designed especially for the Camaro's unique axle angle.\u003cbr\u003e\n \u003cbr\u003e\n 6. E-coated housings and powder coated bars for superior corrosion protection\u003cbr\u003e\n \u003cbr\u003e\n 7. 1 year warranty\u003cbr\u003e\n \u003cbr\u003e\n 8. great for Daily driven and road course\/circuit cars.\u003c\/p\u003e"}

$599.99 $630.00

DRIVESHAFT SHOP LEVEL 4 RIGHT AXLE FOR 08-09 PONTIAC G8 RA5266X4

THIS IS FOR A SINGLE AXLE The Level 4 G8 axles are designed to handle up to 1000HP, featuri...

THIS IS FOR A SINGLE AXLE The Level 4 G8 axles are designed to handle up to 1000HP, featuring our chromoly center bars, 108mm Porsche-style CV's and bolt-on chromoly inner and outer stubs, these are a direct bolt-on that fit the stock hubs and come complete with all the necessary hardware. Not only will these axles handle the horsepower, we have used different diameter bars on each side which will help eliminate wheelhop. The G8 is notorious for wheelhop at launch which can be extremely...

{"id":10514746952,"title":"DRIVESHAFT SHOP LEVEL 4 RIGHT AXLE FOR 08-09 PONTIAC G8 RA5266X4","handle":"ra5266x4","description":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cdiv class=\"std\"\u003e\n The Level 4 G8 axles are designed to handle up to 1000HP, featuring our chromoly center bars, 108mm Porsche-style CV's and bolt-on chromoly inner and outer stubs, these are a direct bolt-on that fit the stock hubs and come complete with all the necessary hardware. Not only will these axles handle the horsepower, we have used different diameter bars on each side which will help eliminate wheelhop. The G8 is notorious for wheelhop at launch which can be extremely damaging to the drivetrain and makes getting traction very difficult. By allowing the axle bars to torsionally twist at different rates the result is traction, not wheelhop.\u003c\/div\u003e","published_at":"2017-08-16T01:53:24-07:00","created_at":"2017-08-16T01:53:24-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Pontiac"],"price":59999,"price_min":59999,"price_max":59999,"available":true,"price_varies":false,"compare_at_price":63000,"compare_at_price_min":63000,"compare_at_price_max":63000,"compare_at_price_varies":false,"variants":[{"id":43740223176,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssRA5266X4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP LEVEL 4 RIGHT AXLE FOR 08-09 PONTIAC G8 RA5266X4","public_title":null,"options":["Default Title"],"price":59999,"weight":32,"compare_at_price":63000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_3d859f69-787c-4ae8-bbb7-b2dd8b9ad392.jpg?v=1676452198"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_3d859f69-787c-4ae8-bbb7-b2dd8b9ad392.jpg?v=1676452198","options":["Title"],"media":[{"alt":null,"id":27890070126750,"position":1,"preview_image":{"aspect_ratio":1.0,"height":218,"width":218,"src":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_3d859f69-787c-4ae8-bbb7-b2dd8b9ad392.jpg?v=1676452198"},"aspect_ratio":1.0,"height":218,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/41v0wrvzbfl._ac_us218_3d859f69-787c-4ae8-bbb7-b2dd8b9ad392.jpg?v=1676452198","width":218}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cdiv class=\"std\"\u003e\n The Level 4 G8 axles are designed to handle up to 1000HP, featuring our chromoly center bars, 108mm Porsche-style CV's and bolt-on chromoly inner and outer stubs, these are a direct bolt-on that fit the stock hubs and come complete with all the necessary hardware. Not only will these axles handle the horsepower, we have used different diameter bars on each side which will help eliminate wheelhop. The G8 is notorious for wheelhop at launch which can be extremely damaging to the drivetrain and makes getting traction very difficult. By allowing the axle bars to torsionally twist at different rates the result is traction, not wheelhop.\u003c\/div\u003e"}

$599.99 $630.00

18849 – 18856 product(s) of 18967

Previous
1
…
2355
2356
2357
2358
2359
…
2371
Next