Axles & Driveshafts

Sort products:

Show:

DRIVESHAFT SHOP BASIC LEVEL AXLE FOR 92-00 HONDA CIVIC RA2897L0

THIS IS FOR A SINGLE AXLEDRIVESHAFT SHOP BASIC LEVEL AXLE FOR 92-00 HONDA CIVIC

$400.64

DRIVESHAFT SHOP CARBON FIBER DRIVESHAFT FOR 7SPD AUTOMATIC 09-12 G37 COUPE INSH5-C

This is the complete Carbon Fiber Driveshaft for the G37 platform, its weighs less than ...

This is the complete Carbon Fiber Driveshaft for the G37 platform, its weighs less than half as much as the factory 2 piece shaft. It's made from 3.25" carbon fiber with billet aluminum ends and adapter plate is a direct bolt on with no modification required. By removing the factory 2 piece shaft the car will lose the excessive motion caused by the hanger bearing moving up and down when you step on the gas, this will make the car react faster to throttle input and make the car feel m...

{"id":10514743240,"title":"DRIVESHAFT SHOP CARBON FIBER DRIVESHAFT FOR 7SPD AUTOMATIC 09-12 G37 COUPE INSH5-C","handle":"insh5-c","description":"\u003cdiv class=\"std\"\u003e\n \u003cdiv class=\"std\"\u003e\n This is the complete Carbon Fiber Driveshaft for the G37 platform, its weighs less than half as much as the factory 2 piece shaft. It's made from 3.25\" carbon fiber with billet aluminum ends and adapter plate is a direct bolt on with no modification required. By removing the factory 2 piece shaft the car will lose the excessive motion caused by the hanger bearing moving up and down when you step on the gas, this will make the car react faster to throttle input and make the car feel more responsive. It is also significantly more torsional than the OE shaft which helps relieve some of the instantaneous shock at launch and between shifts. Rated to over 1000HP with a 1-year warranty.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: For 2009-2012 7-Speed Automatic ONLY\u003cbr\u003e\n For 2008 5-Speed Automatic see part number INSH3-A \/ INSH3-C\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eINSH5-C\u003c\/span\u003e\n\u003c\/h4\u003e\n \u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e","published_at":"2017-08-16T01:53:05-07:00","created_at":"2017-08-16T01:53:05-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Infiniti"],"price":189498,"price_min":189498,"price_max":189498,"available":true,"price_varies":false,"compare_at_price":189498,"compare_at_price_min":189498,"compare_at_price_max":189498,"compare_at_price_varies":false,"variants":[{"id":43740191560,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssINSH5-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP CARBON FIBER DRIVESHAFT FOR 7SPD AUTOMATIC 09-12 G37 COUPE INSH5-C","public_title":null,"options":["Default Title"],"price":189498,"weight":9072,"compare_at_price":189498,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/hysh-2-c_6.jpg?v=1675957026"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/hysh-2-c_6.jpg?v=1675957026","options":["Title"],"media":[{"alt":null,"id":27857486119070,"position":1,"preview_image":{"aspect_ratio":1.0,"height":330,"width":330,"src":"\/\/vexms.com\/cdn\/shop\/products\/hysh-2-c_6.jpg?v=1675957026"},"aspect_ratio":1.0,"height":330,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/hysh-2-c_6.jpg?v=1675957026","width":330}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"std\"\u003e\n \u003cdiv class=\"std\"\u003e\n This is the complete Carbon Fiber Driveshaft for the G37 platform, its weighs less than half as much as the factory 2 piece shaft. It's made from 3.25\" carbon fiber with billet aluminum ends and adapter plate is a direct bolt on with no modification required. By removing the factory 2 piece shaft the car will lose the excessive motion caused by the hanger bearing moving up and down when you step on the gas, this will make the car react faster to throttle input and make the car feel more responsive. It is also significantly more torsional than the OE shaft which helps relieve some of the instantaneous shock at launch and between shifts. Rated to over 1000HP with a 1-year warranty.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: For 2009-2012 7-Speed Automatic ONLY\u003cbr\u003e\n For 2008 5-Speed Automatic see part number INSH3-A \/ INSH3-C\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eINSH5-C\u003c\/span\u003e\n\u003c\/h4\u003e\n \u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e"}

$1,894.98

DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 5SPD 08-14 WRX W/R160 SUSH11-C

The 1-piece driveshaft for the Subaru WRX is a complete 2.370" Carbon Fiber shaft that is app...

The 1-piece driveshaft for the Subaru WRX is a complete 2.370" Carbon Fiber shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece carbon shaft features larger, replaceable u-joints and can handle about 850WHP and 180 MPH. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car...

{"id":10514743112,"title":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 5SPD 08-14 WRX W\/R160 SUSH11-C","handle":"sush11-c","description":"\u003cp\u003e\n The 1-piece driveshaft for the Subaru WRX is a complete 2.370\" Carbon Fiber shaft that is approximately 1\/2 the weight of the factory 2-piece driveshaft. The 1-piece carbon shaft features larger, replaceable u-joints and can handle about 850WHP and 180 MPH. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car at all. The ends are made from 6061-T6 aluminum and that shaft weighs a mere 12.2lbs. Not only will the car feel more responsive but it will also make a noticeable difference on the noise level in the car.\u003cbr\u003e\n \u003cbr\u003e\n By removing the factory 2-piece shaft and installing a single shaft, the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor\/trans combinations, if you don’t see yours listed, custom shafts are also available.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: This driveshaft is rated to 850WHP and a top speed of 180MPH and is not recommended for use above this speed.\u003c\/p\u003e","published_at":"2017-08-16T01:53:04-07:00","created_at":"2017-08-16T01:53:04-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Subaru"],"price":162998,"price_min":162998,"price_max":162998,"available":true,"price_varies":false,"compare_at_price":162998,"compare_at_price_min":162998,"compare_at_price_max":162998,"compare_at_price_varies":false,"variants":[{"id":43740188168,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssSUSH11-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 5SPD 08-14 WRX W\/R160 SUSH11-C","public_title":null,"options":["Default Title"],"price":162998,"weight":7893,"compare_at_price":162998,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_06bcdcfb-3fe4-44b1-b41b-8ff3e745e558.jpg?v=1676018639"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_06bcdcfb-3fe4-44b1-b41b-8ff3e745e558.jpg?v=1676018639","options":["Title"],"media":[{"alt":null,"id":27860941176990,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_06bcdcfb-3fe4-44b1-b41b-8ff3e745e558.jpg?v=1676018639"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_06bcdcfb-3fe4-44b1-b41b-8ff3e745e558.jpg?v=1676018639","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\n The 1-piece driveshaft for the Subaru WRX is a complete 2.370\" Carbon Fiber shaft that is approximately 1\/2 the weight of the factory 2-piece driveshaft. The 1-piece carbon shaft features larger, replaceable u-joints and can handle about 850WHP and 180 MPH. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car at all. The ends are made from 6061-T6 aluminum and that shaft weighs a mere 12.2lbs. Not only will the car feel more responsive but it will also make a noticeable difference on the noise level in the car.\u003cbr\u003e\n \u003cbr\u003e\n By removing the factory 2-piece shaft and installing a single shaft, the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor\/trans combinations, if you don’t see yours listed, custom shafts are also available.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: This driveshaft is rated to 850WHP and a top speed of 180MPH and is not recommended for use above this speed.\u003c\/p\u003e"}

$1,629.98

DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 2015 SUBARU WRX SUSH14-C

The 1-piece driveshaft for the Subaru WRX Sti is a complete 2.75" Carbon Fiber shaft that is ...

The 1-piece driveshaft for the Subaru WRX Sti is a complete 2.75" Carbon Fiber shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece carbon shaft features larger, replaceable u-joints and can handle about 850WHP and 180 MPH. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the ...

{"id":10514742920,"title":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 2015 SUBARU WRX SUSH14-C","handle":"sush14-c","description":"\u003cp\u003e\n The 1-piece driveshaft for the Subaru WRX Sti is a complete 2.75\" Carbon Fiber shaft that is approximately 1\/2 the weight of the factory 2-piece driveshaft. The 1-piece carbon shaft features larger, replaceable u-joints and can handle about 850WHP and 180 MPH. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car at all. The ends are made from 6061-T6 aluminum and that shaft weighs a mere 12.2lbs. Not only will the car feel more responsive but it will also make a noticeable difference on the noise level in the car.\u003cbr\u003e\n \u003cbr\u003e\n By removing the factory 2-piece shaft and installing a single shaft, the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor\/trans combinations, if you don’t see yours listed, custom shafts are also available.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: This driveshaft is rated to 850WHP and a top speed of 180MPH and is not recommended for use above this speed.\u003c\/p\u003e","published_at":"2017-08-16T01:53:03-07:00","created_at":"2017-08-16T01:53:04-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Subaru"],"price":167088,"price_min":167088,"price_max":167088,"available":true,"price_varies":false,"compare_at_price":167088,"compare_at_price_min":167088,"compare_at_price_max":167088,"compare_at_price_varies":false,"variants":[{"id":43740187272,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssSUSH14-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 2015 SUBARU WRX SUSH14-C","public_title":null,"options":["Default Title"],"price":167088,"weight":7530,"compare_at_price":167088,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_914b1ccf-12c4-4b22-a7fa-734c12d4bb74.jpg?v=1632077577"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_914b1ccf-12c4-4b22-a7fa-734c12d4bb74.jpg?v=1632077577","options":["Title"],"media":[{"alt":null,"id":23107111288990,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_914b1ccf-12c4-4b22-a7fa-734c12d4bb74.jpg?v=1632077577"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_914b1ccf-12c4-4b22-a7fa-734c12d4bb74.jpg?v=1632077577","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\n The 1-piece driveshaft for the Subaru WRX Sti is a complete 2.75\" Carbon Fiber shaft that is approximately 1\/2 the weight of the factory 2-piece driveshaft. The 1-piece carbon shaft features larger, replaceable u-joints and can handle about 850WHP and 180 MPH. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car at all. The ends are made from 6061-T6 aluminum and that shaft weighs a mere 12.2lbs. Not only will the car feel more responsive but it will also make a noticeable difference on the noise level in the car.\u003cbr\u003e\n \u003cbr\u003e\n By removing the factory 2-piece shaft and installing a single shaft, the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor\/trans combinations, if you don’t see yours listed, custom shafts are also available.\u003cbr\u003e\n \u003cbr\u003e\n Please Note: This driveshaft is rated to 850WHP and a top speed of 180MPH and is not recommended for use above this speed.\u003c\/p\u003e"}

$1,670.88

DRIVESHAFT SHOP SINGLE RIGHT REAR AXLE STUBS FOR NISSAN GTR R35 108-NI-I-GTRR

THIS IS FOR A SINGLE AXLE When the R35 first came out we rushed and made axles right away, ...

THIS IS FOR A SINGLE AXLE When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have b...

{"id":10514742664,"title":"DRIVESHAFT SHOP SINGLE RIGHT REAR AXLE STUBS FOR NISSAN GTR R35 108-NI-I-GTRR","handle":"108-ni-i-gtrr","description":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have been using from Sweden) along with the billet 4340 housings will handle anything you want to put into them (these will not work with the stock axles).\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Please Note: Stubs will not fit the stock axles, only the Driveshaft Shop Pro-Level kit (NI66 and NI68)\u003c\/p\u003e","published_at":"2017-08-16T01:53:00-07:00","created_at":"2017-08-16T01:53:03-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Nissan"],"price":29999,"price_min":29999,"price_max":29999,"available":true,"price_varies":false,"compare_at_price":34000,"compare_at_price_min":34000,"compare_at_price_max":34000,"compare_at_price_varies":false,"variants":[{"id":43740184264,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dss108-NI-I-GTRR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP SINGLE RIGHT REAR AXLE STUBS FOR NISSAN GTR R35 108-NI-I-GTRR","public_title":null,"options":["Default Title"],"price":29999,"weight":18,"compare_at_price":34000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2_4095e124-c8d1-4876-9090-0754530fd05f.jpg?v=1676452168"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2_4095e124-c8d1-4876-9090-0754530fd05f.jpg?v=1676452168","options":["Title"],"media":[{"alt":null,"id":27890067538078,"position":1,"preview_image":{"aspect_ratio":0.985,"height":2133,"width":2100,"src":"\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2_4095e124-c8d1-4876-9090-0754530fd05f.jpg?v=1676452168"},"aspect_ratio":0.985,"height":2133,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2_4095e124-c8d1-4876-9090-0754530fd05f.jpg?v=1676452168","width":2100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have been using from Sweden) along with the billet 4340 housings will handle anything you want to put into them (these will not work with the stock axles).\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Please Note: Stubs will not fit the stock axles, only the Driveshaft Shop Pro-Level kit (NI66 and NI68)\u003c\/p\u003e"}

$299.99 $340.00

DRIVESHAFT SHOP SINGLE LEFT REAR AXLE STUBS FOR NISSAN GTR R35 108-NI-I-GTRL

THIS IS FOR A SINGLE AXLE When the R35 first came out we rushed and made axles right away, ...

{"id":10514742280,"title":"DRIVESHAFT SHOP SINGLE LEFT REAR AXLE STUBS FOR NISSAN GTR R35 108-NI-I-GTRL","handle":"108-ni-i-gtrl","description":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have been using from Sweden) along with the billet 4340 housings will handle anything you want to put into them (these will not work with the stock axles).\u003c\/p\u003e\n \u003cp\u003e\n \u003c\/p\u003e\n \u003cp\u003e\n Please Note: Stubs will not fit the stock axles, only the Driveshaft Shop Pro-Level kit (NI66 and NI68)\u003c\/p\u003e","published_at":"2017-08-16T01:52:57-07:00","created_at":"2017-08-16T01:53:00-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Nissan"],"price":33243,"price_min":33243,"price_max":33243,"available":true,"price_varies":false,"compare_at_price":31499,"compare_at_price_min":31499,"compare_at_price_max":31499,"compare_at_price_varies":false,"variants":[{"id":43740181128,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dss108-NI-I-GTRL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP SINGLE LEFT REAR AXLE STUBS FOR NISSAN GTR R35 108-NI-I-GTRL","public_title":null,"options":["Default Title"],"price":33243,"weight":6668,"compare_at_price":31499,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2.jpg?v=1676452146"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2.jpg?v=1676452146","options":["Title"],"media":[{"alt":null,"id":27890066129054,"position":1,"preview_image":{"aspect_ratio":0.985,"height":2133,"width":2100,"src":"\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2.jpg?v=1676452146"},"aspect_ratio":0.985,"height":2133,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/r35_stubs1_2.jpg?v=1676452146","width":2100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cp\u003e\n When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have been using from Sweden) along with the billet 4340 housings will handle anything you want to put into them (these will not work with the stock axles).\u003c\/p\u003e\n \u003cp\u003e\n \u003c\/p\u003e\n \u003cp\u003e\n Please Note: Stubs will not fit the stock axles, only the Driveshaft Shop Pro-Level kit (NI66 and NI68)\u003c\/p\u003e"}

$332.43

DRIVESHAFT SHOP 3.5IN ALUMINUM DRIVESHAFT FOR MANUAL 08-12 G37 NON IPL INSH2

This is the complete Aluminum Driveshaft for the G37 platform, its weighs only about half as ...

This is the complete Aluminum Driveshaft for the G37 platform, its weighs only about half as much as the factory 2 piece shaft. It's a 3.5" 6061-T6 aluminum shaft that is a direct bolt on. By removing the factory 2 piece shaft the car will lose the excessive motion caused by the hanger bearing moving up and down when you step on the gas. This will make the car react faster to throttle input and make the car feel more responsive. Rated to 1000HP with a 1-year warranty.

{"id":10514741704,"title":"DRIVESHAFT SHOP 3.5IN ALUMINUM DRIVESHAFT FOR MANUAL 08-12 G37 NON IPL INSH2","handle":"insh2","description":"\u003cdiv class=\"std\"\u003e\n This is the complete Aluminum Driveshaft for the G37 platform, its weighs only about half as much as the factory 2 piece shaft. It's a 3.5\" 6061-T6 aluminum shaft that is a direct bolt on. By removing the factory 2 piece shaft the car will lose the excessive motion caused by the hanger bearing moving up and down when you step on the gas. This will make the car react faster to throttle input and make the car feel more responsive. Rated to 1000HP with a 1-year warranty.\u003c\/div\u003e","published_at":"2017-08-16T01:52:57-07:00","created_at":"2017-08-16T01:52:57-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Infiniti"],"price":89479,"price_min":89479,"price_max":89479,"available":true,"price_varies":false,"compare_at_price":89479,"compare_at_price_min":89479,"compare_at_price_max":89479,"compare_at_price_varies":false,"variants":[{"id":43740173128,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssINSH2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 3.5IN ALUMINUM DRIVESHAFT FOR MANUAL 08-12 G37 NON IPL INSH2","public_title":null,"options":["Default Title"],"price":89479,"weight":9571,"compare_at_price":89479,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/31x_2burhemvl._sx355_3ab8ee39-b3bc-423d-9d19-b1e7556fba27.jpg?v=1676018697"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/31x_2burhemvl._sx355_3ab8ee39-b3bc-423d-9d19-b1e7556fba27.jpg?v=1676018697","options":["Title"],"media":[{"alt":null,"id":27860942651550,"position":1,"preview_image":{"aspect_ratio":2.006,"height":177,"width":355,"src":"\/\/vexms.com\/cdn\/shop\/products\/31x_2burhemvl._sx355_3ab8ee39-b3bc-423d-9d19-b1e7556fba27.jpg?v=1676018697"},"aspect_ratio":2.006,"height":177,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/31x_2burhemvl._sx355_3ab8ee39-b3bc-423d-9d19-b1e7556fba27.jpg?v=1676018697","width":355}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"std\"\u003e\n This is the complete Aluminum Driveshaft for the G37 platform, its weighs only about half as much as the factory 2 piece shaft. It's a 3.5\" 6061-T6 aluminum shaft that is a direct bolt on. By removing the factory 2 piece shaft the car will lose the excessive motion caused by the hanger bearing moving up and down when you step on the gas. This will make the car react faster to throttle input and make the car feel more responsive. Rated to 1000HP with a 1-year warranty.\u003c\/div\u003e"}

$894.79

DRIVESHAFT SHOP 3 BOLT DIFF TO U-JOINT DIFF CONVERTER FOR Toyota Supra 93-98 Rear TOPL1

This 7075 aluminum conversion plate will adapt the factory Toyota 3-Bolt Differential Flange ...

This 7075 aluminum conversion plate will adapt the factory Toyota 3-Bolt Differential Flange (auto and manual) to a 1350 4-Bolt U-Joint Flange. This is the same adapter plate as can be found on our line of pro-series driveshafts for these vehicles. They are precision machined on centers to maintain perfect centerline and will fit onto the centering-pin that is on the factory differential flange. Includes all necessary hardware to mount the adapter.

{"id":10514741384,"title":"DRIVESHAFT SHOP 3 BOLT DIFF TO U-JOINT DIFF CONVERTER FOR Toyota Supra 93-98 Rear TOPL1","handle":"topl1","description":"\u003cp\u003e\n This 7075 aluminum conversion plate will adapt the factory Toyota 3-Bolt Differential Flange (auto and manual) to a 1350 4-Bolt U-Joint Flange. This is the same adapter plate as can be found on our line of pro-series driveshafts for these vehicles. They are precision machined on centers to maintain perfect centerline and will fit onto the centering-pin that is on the factory differential flange. Includes all necessary hardware to mount the adapter.\u003c\/p\u003e","published_at":"2017-08-16T01:52:55-07:00","created_at":"2017-08-16T01:52:55-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Toyota"],"price":22783,"price_min":22783,"price_max":22783,"available":true,"price_varies":false,"compare_at_price":20789,"compare_at_price_min":20789,"compare_at_price_max":20789,"compare_at_price_varies":false,"variants":[{"id":43740172040,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssTOPL1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 3 BOLT DIFF TO U-JOINT DIFF CONVERTER FOR Toyota Supra 93-98 Rear TOPL1","public_title":null,"options":["Default Title"],"price":22783,"weight":1451,"compare_at_price":20789,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/topl_1_1.jpg?v=1676449951"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/topl_1_1.jpg?v=1676449951","options":["Title"],"media":[{"alt":null,"id":27889942659230,"position":1,"preview_image":{"aspect_ratio":1.337,"height":374,"width":500,"src":"\/\/vexms.com\/cdn\/shop\/products\/topl_1_1.jpg?v=1676449951"},"aspect_ratio":1.337,"height":374,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/topl_1_1.jpg?v=1676449951","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\n This 7075 aluminum conversion plate will adapt the factory Toyota 3-Bolt Differential Flange (auto and manual) to a 1350 4-Bolt U-Joint Flange. This is the same adapter plate as can be found on our line of pro-series driveshafts for these vehicles. They are precision machined on centers to maintain perfect centerline and will fit onto the centering-pin that is on the factory differential flange. Includes all necessary hardware to mount the adapter.\u003c\/p\u003e"}

$227.83

17905 – 17912 product(s) of 17995

Previous
1
…
2237
2238
2239
2240
2241
…
2250
Next