My account

Home
Collections
Axles & Driveshafts

Axles & Driveshafts

Sort products:

Show:

DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 6SPD 2015-2016 MUSTANG GT

So the 2015 Mustang now has an independent rear suspension (IRS) and the driveshaft is a...

So the 2015 Mustang now has an independent rear suspension (IRS) and the driveshaft is a little different than the S197 cars. Although the factory one is still a 2 piece shaft, they are different in configuration. Automatic uses a 4-bolt flange on the back of the trans (DSS will be using the new Forged Aluminum 1350 flange for this) but the Manual's (all of them) have a Guibo. What is a Guibo? its a rubber doughnut coupler like ones used in most European cars. They're put on to make ...

{"id":10514748744,"title":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 6SPD 2015-2016 MUSTANG GT","handle":"fdsh25-c","description":"\u003cdiv class=\"std\"\u003e\n \u003cdiv class=\"std\"\u003e\n So the 2015 Mustang now has an independent rear suspension (IRS) and the driveshaft is a little different than the S197 cars. Although the factory one is still a 2 piece shaft, they are different in configuration. Automatic uses a 4-bolt flange on the back of the trans (DSS will be using the new Forged Aluminum 1350 flange for this) but the Manual's (all of them) have a Guibo. What is a Guibo? its a rubber doughnut coupler like ones used in most European cars. They're put on to make the drivetrain smoother and more soft. But lets face it, soft in a performance car is well, kinda soft. What we have done is make a billet plate to eliminate the Guibo, then changed that end to a nice 1350 solid Spicer u-joint. The end is pulse welded to the tube on the aluminum shaft and then a 6-bolt CV just like the factory one. Why does DSS use the CV and not a slider like from a 4x4? The reason is that DSS high-speed balances their driveshafts and found out years ago that the CV is more stable and less likely to have Harmonic issues. Also the CV will have a much higher critical speed then a male\/female slider. We here at DSS have become a leading force in using CV's on Driveshafts in the aftermarket and have come a long way with how they are made and used. What's great about this car being IRS is that there are no issues with angles, adjustable arms or ride height issues that can affect the drivetrain. The Carbon fiber driveshaft will give more of a torsional twist but with out the harmful reverse snap given from steel. The aluminum is about half between steel and carbon fiber. This will not only reduce harmonics but also help with 60ft times (aluminum will also be superior over the stock steel 2 piece). And the ends are either Billet or Forged, we never use inexpensive cast parts in our shafts.\u003cbr\u003e\n \u003cbr\u003e\n So there you have it, the new 2015 Mustang shafts from DSS.\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eFDSH25-C\u003c\/span\u003e\n\u003c\/h4\u003e\n \u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e","published_at":"2017-08-16T01:53:37-07:00","created_at":"2017-08-16T01:53:38-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Ford"],"price":139999,"price_min":139999,"price_max":139999,"available":true,"price_varies":false,"compare_at_price":139999,"compare_at_price_min":139999,"compare_at_price_max":139999,"compare_at_price_varies":false,"variants":[{"id":43740230792,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssFDSH25-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 6SPD 2015-2016 MUSTANG GT","public_title":null,"options":["Default Title"],"price":139999,"weight":32,"compare_at_price":139999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_79c04bd2-700a-4b15-b92b-1dbdb93fd88b.jpg?v=1676473653"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_79c04bd2-700a-4b15-b92b-1dbdb93fd88b.jpg?v=1676473653","options":["Title"],"media":[{"alt":null,"id":27893089763486,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_79c04bd2-700a-4b15-b92b-1dbdb93fd88b.jpg?v=1676473653"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_79c04bd2-700a-4b15-b92b-1dbdb93fd88b.jpg?v=1676473653","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"std\"\u003e\n \u003cdiv class=\"std\"\u003e\n So the 2015 Mustang now has an independent rear suspension (IRS) and the driveshaft is a little different than the S197 cars. Although the factory one is still a 2 piece shaft, they are different in configuration. Automatic uses a 4-bolt flange on the back of the trans (DSS will be using the new Forged Aluminum 1350 flange for this) but the Manual's (all of them) have a Guibo. What is a Guibo? its a rubber doughnut coupler like ones used in most European cars. They're put on to make the drivetrain smoother and more soft. But lets face it, soft in a performance car is well, kinda soft. What we have done is make a billet plate to eliminate the Guibo, then changed that end to a nice 1350 solid Spicer u-joint. The end is pulse welded to the tube on the aluminum shaft and then a 6-bolt CV just like the factory one. Why does DSS use the CV and not a slider like from a 4x4? The reason is that DSS high-speed balances their driveshafts and found out years ago that the CV is more stable and less likely to have Harmonic issues. Also the CV will have a much higher critical speed then a male\/female slider. We here at DSS have become a leading force in using CV's on Driveshafts in the aftermarket and have come a long way with how they are made and used. What's great about this car being IRS is that there are no issues with angles, adjustable arms or ride height issues that can affect the drivetrain. The Carbon fiber driveshaft will give more of a torsional twist but with out the harmful reverse snap given from steel. The aluminum is about half between steel and carbon fiber. This will not only reduce harmonics but also help with 60ft times (aluminum will also be superior over the stock steel 2 piece). And the ends are either Billet or Forged, we never use inexpensive cast parts in our shafts.\u003cbr\u003e\n \u003cbr\u003e\n So there you have it, the new 2015 Mustang shafts from DSS.\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eFDSH25-C\u003c\/span\u003e\n\u003c\/h4\u003e\n \u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e"}

$1,399.99

DRIVESHAFT SHOP 1PC CARBON FIBER CV DRIVESHAFT FOR AUTO 08-09 PONTIAC G8 GMG8SH2-C-CV

Available now for the 2008-2009 G8 is our 3-3/8" Carbon Fiber shaft with CV. We have released...

Available now for the 2008-2009 G8 is our 3-3/8" Carbon Fiber shaft with CV. We have released our new carbon shafts with our "new Bond Technology" call for more info about this, its a company secret and were not going to tell the other driveshaft manufacturers what we now know and they dont. We have been working with Carbon fiber for a few months here at DSS, we actually have been waiting for our new 9500Rpm actual speed balancer to be able to not only bring the Carbon shafts i...

{"id":10514748552,"title":"DRIVESHAFT SHOP 1PC CARBON FIBER CV DRIVESHAFT FOR AUTO 08-09 PONTIAC G8 GMG8SH2-C-CV","handle":"gmg8sh2-c-cv","description":"\u003cp\u003e\n Available now for the 2008-2009 G8 is our 3-3\/8\" Carbon Fiber shaft with CV. We have released our new carbon shafts with our \"new Bond Technology\" call for more info about this, its a company secret and were not going to tell the other driveshaft manufacturers what we now know and they dont.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n We have been working with Carbon fiber for a few months here at DSS, we actually have been waiting for our new 9500Rpm actual speed balancer to be able to not only bring the Carbon shafts into production, but also make sure they are the best balanced and manufactured shafts available. We have done several \"test\" shafts and will be ready to go into production in the very near future with this shaft. it will be a 3-3\/8'' carbon shaft with a special 30 spline ends (same spline as a Viper T56 output and not the standard 28 spline) This custom lightened Porsche style 930 joint is custom made with High grade aerospace grade proprietary material (its a modified 300m from a 475 year old mill in Sweden and about 15% stronger) we have finished destructive testing on all parts to ensure its ability to endure the punishment of this platform.\u003c\/p\u003e","published_at":"2017-08-16T01:53:36-07:00","created_at":"2017-08-16T01:53:37-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Pontiac"],"price":192497,"price_min":192497,"price_max":192497,"available":true,"price_varies":false,"compare_at_price":192497,"compare_at_price_min":192497,"compare_at_price_max":192497,"compare_at_price_varies":false,"variants":[{"id":43740229064,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssGMG8SH2-C-CV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC CARBON FIBER CV DRIVESHAFT FOR AUTO 08-09 PONTIAC G8 GMG8SH2-C-CV","public_title":null,"options":["Default Title"],"price":192497,"weight":12746,"compare_at_price":192497,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/gmg8sh2-c-cv_5a1857bd-8db5-438c-be97-619e3062ad57.jpg?v=1632077600"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/gmg8sh2-c-cv_5a1857bd-8db5-438c-be97-619e3062ad57.jpg?v=1632077600","options":["Title"],"media":[{"alt":null,"id":23107114893470,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/gmg8sh2-c-cv_5a1857bd-8db5-438c-be97-619e3062ad57.jpg?v=1632077600"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/gmg8sh2-c-cv_5a1857bd-8db5-438c-be97-619e3062ad57.jpg?v=1632077600","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\n Available now for the 2008-2009 G8 is our 3-3\/8\" Carbon Fiber shaft with CV. We have released our new carbon shafts with our \"new Bond Technology\" call for more info about this, its a company secret and were not going to tell the other driveshaft manufacturers what we now know and they dont.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n We have been working with Carbon fiber for a few months here at DSS, we actually have been waiting for our new 9500Rpm actual speed balancer to be able to not only bring the Carbon shafts into production, but also make sure they are the best balanced and manufactured shafts available. We have done several \"test\" shafts and will be ready to go into production in the very near future with this shaft. it will be a 3-3\/8'' carbon shaft with a special 30 spline ends (same spline as a Viper T56 output and not the standard 28 spline) This custom lightened Porsche style 930 joint is custom made with High grade aerospace grade proprietary material (its a modified 300m from a 475 year old mill in Sweden and about 15% stronger) we have finished destructive testing on all parts to ensure its ability to endure the punishment of this platform.\u003c\/p\u003e"}

$1,924.97

DRIVESHAFT SHOP REAR AXLE BAR/INNER CV UPGRADE FOR 86-92 RX7 MZIN-1

THIS IS FOR A SINGLE AXLE Introducing the new Axle Bar / Inner CV and Outer Race Upgrade fo...

THIS IS FOR A SINGLE AXLE Introducing the new Axle Bar / Inner CV and Outer Race Upgrade for the 86-92 Mazda RX-7 Turbo II. This upgrade includes high grade aircraft quality axle bars, new porsche-style 108mm inner CV's with bolt-on flanges and inner stubs into the differential. We also include chromoly outer CV races to convert your factory outer CV from 26 spline internal to 36 spline to fit our larger axle bars. You must reuse your factory outer CV with this upgrade. Rated to 800HP w...

{"id":10514748424,"title":"DRIVESHAFT SHOP REAR AXLE BAR\/INNER CV UPGRADE FOR 86-92 RX7 MZIN-1","handle":"mzin-1","description":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cdiv class=\"std\"\u003e\n Introducing the new Axle Bar \/ Inner CV and Outer Race Upgrade for the 86-92 Mazda RX-7 Turbo II. This upgrade includes high grade aircraft quality axle bars, new porsche-style 108mm inner CV's with bolt-on flanges and inner stubs into the differential. We also include chromoly outer CV races to convert your factory outer CV from 26 spline internal to 36 spline to fit our larger axle bars. You must reuse your factory outer CV with this upgrade. Rated to 800HP with a 1-year warranty.\u003c\/div\u003e","published_at":"2017-08-16T01:53:35-07:00","created_at":"2017-08-16T01:53:36-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Mazda"],"price":129999,"price_min":129999,"price_max":129999,"available":true,"price_varies":false,"compare_at_price":129999,"compare_at_price_min":129999,"compare_at_price_max":129999,"compare_at_price_varies":false,"variants":[{"id":43740226696,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssMZIN-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP REAR AXLE BAR\/INNER CV UPGRADE FOR 86-92 RX7 MZIN-1","public_title":null,"options":["Default Title"],"price":129999,"weight":32,"compare_at_price":129999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/mif1_8_1_7304c92c-e6e3-495a-bd1b-0fbe4c567d46.gif?v=1676452146"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/mif1_8_1_7304c92c-e6e3-495a-bd1b-0fbe4c567d46.gif?v=1676452146","options":["Title"],"media":[{"alt":null,"id":27890066227358,"position":1,"preview_image":{"aspect_ratio":1.171,"height":246,"width":288,"src":"\/\/vexms.com\/cdn\/shop\/products\/mif1_8_1_7304c92c-e6e3-495a-bd1b-0fbe4c567d46.gif?v=1676452146"},"aspect_ratio":1.171,"height":246,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/mif1_8_1_7304c92c-e6e3-495a-bd1b-0fbe4c567d46.gif?v=1676452146","width":288}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"THIS IS FOR A SINGLE AXLE\u003cbr\u003e\u003cbr\u003e\n \u003cdiv class=\"std\"\u003e\n Introducing the new Axle Bar \/ Inner CV and Outer Race Upgrade for the 86-92 Mazda RX-7 Turbo II. This upgrade includes high grade aircraft quality axle bars, new porsche-style 108mm inner CV's with bolt-on flanges and inner stubs into the differential. We also include chromoly outer CV races to convert your factory outer CV from 26 spline internal to 36 spline to fit our larger axle bars. You must reuse your factory outer CV with this upgrade. Rated to 800HP with a 1-year warranty.\u003c\/div\u003e"}

$1,299.99

DRIVESHAFT SHOP AXLE/HUB KIT FOR 97-01 INTEGRA TYPE R AC45

This axle/hub system is designed for the real fast street or drag cars with up to 600HP. This...

This axle/hub system is designed for the real fast street or drag cars with up to 600HP. This was our older (pre-2004) Level 5 system and we have brought it out of retirement due to the fact that a 600HP street car is now a normal thing. This has been one of the best systems for a Honda platform to date and is still a staple in most tuner shops around the world. This axle is made from high grade aircraft quality material with billet inner CV housings and the outer CV is 20% larger than a...

{"id":10514748168,"title":"DRIVESHAFT SHOP AXLE\/HUB KIT FOR 97-01 INTEGRA TYPE R AC45","handle":"ac45","description":"\u003cp\u003e\n This axle\/hub system is designed for the real fast street or drag cars with up to 600HP. This was our older (pre-2004) Level 5 system and we have brought it out of retirement due to the fact that a 600HP street car is now a normal thing. This has been one of the best systems for a Honda platform to date and is still a staple in most tuner shops around the world. This axle is made from high grade aircraft quality material with billet inner CV housings and the outer CV is 20% larger than a factory one and is made from a proprietary material that is brutally strong. The kit comes with a custom hub that is an exact replica of the factory one it just has the larger spline inside and includes extended ARP racing studs (standard length studs available upon request). Rated to 600HP with a full 1-year warranty.\u003cbr\u003e\n PART# AC45\u003cbr\u003e\n \u003cbr\u003e\n Please Note: ABS Rings are not included on this system\u003c\/p\u003e","published_at":"2017-08-16T01:53:32-07:00","created_at":"2017-08-16T01:53:35-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Acura"],"price":157656,"price_min":157656,"price_max":157656,"available":true,"price_varies":false,"compare_at_price":157656,"compare_at_price_min":157656,"compare_at_price_max":157656,"compare_at_price_varies":false,"variants":[{"id":43740225608,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssAC45","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP AXLE\/HUB KIT FOR 97-01 INTEGRA TYPE R AC45","public_title":null,"options":["Default Title"],"price":157656,"weight":19504,"compare_at_price":157656,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/ac68.gif?v=1676432974"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/ac68.gif?v=1676432974","options":["Title"],"media":[{"alt":null,"id":27888911876254,"position":1,"preview_image":{"aspect_ratio":0.961,"height":1873,"width":1800,"src":"\/\/vexms.com\/cdn\/shop\/products\/ac68.gif?v=1676432974"},"aspect_ratio":0.961,"height":1873,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/ac68.gif?v=1676432974","width":1800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\n This axle\/hub system is designed for the real fast street or drag cars with up to 600HP. This was our older (pre-2004) Level 5 system and we have brought it out of retirement due to the fact that a 600HP street car is now a normal thing. This has been one of the best systems for a Honda platform to date and is still a staple in most tuner shops around the world. This axle is made from high grade aircraft quality material with billet inner CV housings and the outer CV is 20% larger than a factory one and is made from a proprietary material that is brutally strong. The kit comes with a custom hub that is an exact replica of the factory one it just has the larger spline inside and includes extended ARP racing studs (standard length studs available upon request). Rated to 600HP with a full 1-year warranty.\u003cbr\u003e\n PART# AC45\u003cbr\u003e\n \u003cbr\u003e\n Please Note: ABS Rings are not included on this system\u003c\/p\u003e"}

$1,576.56

DRIVESHAFT SHOP 1PC CARBON FIBER CV SHAFT FOR AUTO 15-16 MUSTANG GT FDSH44-C

So the 2015 Mustang now has an independent rear suspension (IRS) and the driveshaft is a litt...

So the 2015 Mustang now has an independent rear suspension (IRS) and the driveshaft is a little different than the S197 cars. Although the factory one is still a 2 piece shaft, they are different in configuration. Automatic uses a 4-bolt flange on the back of the trans but the Manual's (all of them) have a Guibo. What is a Guibo? its a rubber doughnut coupler like ones used in most European cars. They're put on to make the drivetrain smoother and more soft. But lets face it, soft in a per...

{"id":10514747912,"title":"DRIVESHAFT SHOP 1PC CARBON FIBER CV SHAFT FOR AUTO 15-16 MUSTANG GT FDSH44-C","handle":"fdsh44-c","description":"\u003cdiv class=\"std\"\u003e\n So the 2015 Mustang now has an independent rear suspension (IRS) and the driveshaft is a little different than the S197 cars. Although the factory one is still a 2 piece shaft, they are different in configuration. Automatic uses a 4-bolt flange on the back of the trans but the Manual's (all of them) have a Guibo. What is a Guibo? its a rubber doughnut coupler like ones used in most European cars. They're put on to make the drivetrain smoother and more soft. But lets face it, soft in a performance car is well, kinda soft. What we have done is make a billet plate to eliminate the Guibo, then changed that end to a 108mm CV joint. Why does DSS use the CV and not a slider like from a 4x4? The reason is that DSS high-speed balances their driveshafts and found out years ago that the CV is more stable and less likely to have Harmonic issues. Also the CV will have a much higher critical speed then a male\/female slider. We here at DSS have become a leading force in using CV's on Driveshafts in the aftermarket and have come a long way with how they are made and used. What's great about this car being IRS is that there are no issues with angles, adjustable arms or ride height issues that can affect the drivetrain. The Carbon fiber driveshaft will give more of a torsional twist but with out the harmful reverse snap given from steel. The aluminum is about half between steel and carbon fiber. This will not only reduce harmonics but also help with 60ft times (aluminum will also be superior over the stock steel 2 piece). And the ends are either Billet or Forged, we never use inexpensive cast parts in our shafts.\u003cbr\u003e\n \u003cbr\u003e\n So there you have it, the new 2015 Mustang shafts from DSS.\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eFDSH44-C\u003c\/span\u003e\n\u003c\/h4\u003e","published_at":"2017-08-16T01:53:31-07:00","created_at":"2017-08-16T01:53:32-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Ford"],"price":129999,"price_min":129999,"price_max":129999,"available":true,"price_varies":false,"compare_at_price":129999,"compare_at_price_min":129999,"compare_at_price_max":129999,"compare_at_price_varies":false,"variants":[{"id":43740224712,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssFDSH44-C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC CARBON FIBER CV SHAFT FOR AUTO 15-16 MUSTANG GT FDSH44-C","public_title":null,"options":["Default Title"],"price":129999,"weight":32,"compare_at_price":129999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/gmg8sh2-c-cv.jpg?v=1676452168"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/gmg8sh2-c-cv.jpg?v=1676452168","options":["Title"],"media":[{"alt":null,"id":27890067636382,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/gmg8sh2-c-cv.jpg?v=1676452168"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/gmg8sh2-c-cv.jpg?v=1676452168","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"std\"\u003e\n So the 2015 Mustang now has an independent rear suspension (IRS) and the driveshaft is a little different than the S197 cars. Although the factory one is still a 2 piece shaft, they are different in configuration. Automatic uses a 4-bolt flange on the back of the trans but the Manual's (all of them) have a Guibo. What is a Guibo? its a rubber doughnut coupler like ones used in most European cars. They're put on to make the drivetrain smoother and more soft. But lets face it, soft in a performance car is well, kinda soft. What we have done is make a billet plate to eliminate the Guibo, then changed that end to a 108mm CV joint. Why does DSS use the CV and not a slider like from a 4x4? The reason is that DSS high-speed balances their driveshafts and found out years ago that the CV is more stable and less likely to have Harmonic issues. Also the CV will have a much higher critical speed then a male\/female slider. We here at DSS have become a leading force in using CV's on Driveshafts in the aftermarket and have come a long way with how they are made and used. What's great about this car being IRS is that there are no issues with angles, adjustable arms or ride height issues that can affect the drivetrain. The Carbon fiber driveshaft will give more of a torsional twist but with out the harmful reverse snap given from steel. The aluminum is about half between steel and carbon fiber. This will not only reduce harmonics but also help with 60ft times (aluminum will also be superior over the stock steel 2 piece). And the ends are either Billet or Forged, we never use inexpensive cast parts in our shafts.\u003cbr\u003e\n \u003cbr\u003e\n So there you have it, the new 2015 Mustang shafts from DSS.\u003c\/div\u003e\n \u003ch4\u003e\n Part Number: \u003cspan style=\"font-weight: normal;\"\u003eFDSH44-C\u003c\/span\u003e\n\u003c\/h4\u003e"}

$1,299.99

DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 6SPD 2015 MUSTANG SHELBY

Product Description The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Pi...

Product Description The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts 1.1350 front u-joint with flange to mount up to the transmission 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues. 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft 4. Custom modified High Speed 108mm CV with special ...

{"id":10514747784,"title":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 6SPD 2015 MUSTANG SHELBY","handle":"fdsh10-c-cv","description":"\u003cdiv class=\"std\"\u003e\n \u003ch3\u003e\n Product Description\u003c\/h3\u003e\n The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts\u003cbr\u003e\n \u003cbr\u003e\n 1.1350 front u-joint with flange to mount up to the transmission\u003cbr\u003e\n 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.\u003cbr\u003e\n 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft\u003cbr\u003e\n 4. Custom modified High Speed 108mm CV with special boot and grease.\u003cbr\u003e\n 5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version\u003cbr\u003e\n 6. All Hardware included\u003cbr\u003e\n 7. 1 Year Warranty\u003cbr\u003e\n 8. 900HP Rated\u003cbr\u003e\n 9. Balanced on one of the most sophisticated balancing machines in the industry.\u003cbr\u003e\n 10. with the CV in the rear there is no need to change pinion angle on lowered cars.\u003cbr\u003e\n 11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.\u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e","published_at":"2017-08-16T01:53:30-07:00","created_at":"2017-08-16T01:53:31-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Ford"],"price":124999,"price_min":124999,"price_max":124999,"available":true,"price_varies":false,"compare_at_price":124999,"compare_at_price_min":124999,"compare_at_price_max":124999,"compare_at_price_varies":false,"variants":[{"id":43740224584,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssFDSH10-C-CV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 6SPD 2015 MUSTANG SHELBY","public_title":null,"options":["Default Title"],"price":124999,"weight":32,"compare_at_price":124999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_4354d1ef-b341-4f02-aa13-e97671c45167.jpg?v=1676473758"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_4354d1ef-b341-4f02-aa13-e97671c45167.jpg?v=1676473758","options":["Title"],"media":[{"alt":null,"id":27893097857182,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_4354d1ef-b341-4f02-aa13-e97671c45167.jpg?v=1676473758"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_4354d1ef-b341-4f02-aa13-e97671c45167.jpg?v=1676473758","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"std\"\u003e\n \u003ch3\u003e\n Product Description\u003c\/h3\u003e\n The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts\u003cbr\u003e\n \u003cbr\u003e\n 1.1350 front u-joint with flange to mount up to the transmission\u003cbr\u003e\n 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.\u003cbr\u003e\n 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft\u003cbr\u003e\n 4. Custom modified High Speed 108mm CV with special boot and grease.\u003cbr\u003e\n 5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version\u003cbr\u003e\n 6. All Hardware included\u003cbr\u003e\n 7. 1 Year Warranty\u003cbr\u003e\n 8. 900HP Rated\u003cbr\u003e\n 9. Balanced on one of the most sophisticated balancing machines in the industry.\u003cbr\u003e\n 10. with the CV in the rear there is no need to change pinion angle on lowered cars.\u003cbr\u003e\n 11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.\u003c\/div\u003e\n \u003cp\u003e\n \u003c\/p\u003e"}

$1,249.99

DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 2011-2014 MUSTANG GT/BOSS 302

Product Description The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piec...

{"id":10514747656,"title":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 2011-2014 MUSTANG GT\/BOSS 302","handle":"fdsh22-c-cv","description":"\u003ch3\u003e\n Product Description\u003c\/h3\u003e\n \u003cp\u003e\n The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts\u003cbr\u003e\n \u003cbr\u003e\n 1.1350 front u-joint with flange to mount up to the transmission\u003cbr\u003e\n 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.\u003cbr\u003e\n 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft\u003cbr\u003e\n 4. Custom modified High Speed 108mm CV with special boot and grease.\u003cbr\u003e\n 5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version\u003cbr\u003e\n 6. All Hardware included\u003cbr\u003e\n 7. 1 Year Warranty\u003cbr\u003e\n 8. 900HP Rated\u003cbr\u003e\n 9. Balanced on one of the most sophisticated balancing machines in the industry.\u003cbr\u003e\n 10. with the CV in the rear there is no need to change pinion angle on lowered cars.\u003cbr\u003e\n 11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.\u003c\/p\u003e","published_at":"2017-08-16T01:53:28-07:00","created_at":"2017-08-16T01:53:30-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Ford"],"price":124999,"price_min":124999,"price_max":124999,"available":true,"price_varies":false,"compare_at_price":124999,"compare_at_price_min":124999,"compare_at_price_max":124999,"compare_at_price_varies":false,"variants":[{"id":43740224392,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssFDSH22-C-CV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESHAFT FOR 2011-2014 MUSTANG GT\/BOSS 302","public_title":null,"options":["Default Title"],"price":124999,"weight":32,"compare_at_price":124999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_bc0cf097-389a-4381-8516-7f6aa16bdc18.jpg?v=1676473621"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_bc0cf097-389a-4381-8516-7f6aa16bdc18.jpg?v=1676473621","options":["Title"],"media":[{"alt":null,"id":27893087338654,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_bc0cf097-389a-4381-8516-7f6aa16bdc18.jpg?v=1676473621"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_bc0cf097-389a-4381-8516-7f6aa16bdc18.jpg?v=1676473621","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e\n Product Description\u003c\/h3\u003e\n \u003cp\u003e\n The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts\u003cbr\u003e\n \u003cbr\u003e\n 1.1350 front u-joint with flange to mount up to the transmission\u003cbr\u003e\n 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.\u003cbr\u003e\n 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft\u003cbr\u003e\n 4. Custom modified High Speed 108mm CV with special boot and grease.\u003cbr\u003e\n 5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version\u003cbr\u003e\n 6. All Hardware included\u003cbr\u003e\n 7. 1 Year Warranty\u003cbr\u003e\n 8. 900HP Rated\u003cbr\u003e\n 9. Balanced on one of the most sophisticated balancing machines in the industry.\u003cbr\u003e\n 10. with the CV in the rear there is no need to change pinion angle on lowered cars.\u003cbr\u003e\n 11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.\u003c\/p\u003e"}

$1,249.99

DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESAHFT W/CV FOR 05-10 MUSTANG GT

The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts ...

The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts 1.1350 front u-joint with flange to mount up to the transmission 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues. 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft 4. Custom modified High Speed 108mm CV with special boot and grease. 5. Custo...

{"id":10514747464,"title":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESAHFT W\/CV FOR 05-10 MUSTANG GT","handle":"fdsh9-c-cv","description":"\u003cp\u003e\n The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts\u003cbr\u003e\n \u003cbr\u003e\n 1.1350 front u-joint with flange to mount up to the transmission\u003cbr\u003e\n 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.\u003cbr\u003e\n 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft\u003cbr\u003e\n 4. Custom modified High Speed 108mm CV with special boot and grease.\u003cbr\u003e\n 5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version\u003cbr\u003e\n 6. All Hardware included\u003cbr\u003e\n 7. 1 Year Warranty\u003cbr\u003e\n 8. 900HP Rated\u003cbr\u003e\n 9. Balanced on one of the most sophisticated balancing machines in the industry.\u003cbr\u003e\n 10. with the CV in the rear there is no need to change pinion angle on lowered cars.\u003cbr\u003e\n 11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.\u003c\/p\u003e","published_at":"2017-08-16T01:53:27-07:00","created_at":"2017-08-16T01:53:28-07:00","vendor":"VEX Motorsports","type":"Axles \u0026 Driveshafts","tags":["Ford"],"price":124999,"price_min":124999,"price_max":124999,"available":true,"price_varies":false,"compare_at_price":124999,"compare_at_price_min":124999,"compare_at_price_max":124999,"compare_at_price_varies":false,"variants":[{"id":43740224200,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"dssFDSH9-C-CV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DRIVESHAFT SHOP 1PC CARBON FIBER DRIVESAHFT W\/CV FOR 05-10 MUSTANG GT","public_title":null,"options":["Default Title"],"price":124999,"weight":32,"compare_at_price":124999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_74f5fa68-07b3-47ea-95c5-b9ee2e42883d.jpg?v=1676473701"],"featured_image":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_74f5fa68-07b3-47ea-95c5-b9ee2e42883d.jpg?v=1676473701","options":["Title"],"media":[{"alt":null,"id":27893093695646,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_74f5fa68-07b3-47ea-95c5-b9ee2e42883d.jpg?v=1676473701"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/vexms.com\/cdn\/shop\/products\/gtosh2-c2-0506_74f5fa68-07b3-47ea-95c5-b9ee2e42883d.jpg?v=1676473701","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\n The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts\u003cbr\u003e\n \u003cbr\u003e\n 1.1350 front u-joint with flange to mount up to the transmission\u003cbr\u003e\n 2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.\u003cbr\u003e\n 3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft\u003cbr\u003e\n 4. Custom modified High Speed 108mm CV with special boot and grease.\u003cbr\u003e\n 5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version\u003cbr\u003e\n 6. All Hardware included\u003cbr\u003e\n 7. 1 Year Warranty\u003cbr\u003e\n 8. 900HP Rated\u003cbr\u003e\n 9. Balanced on one of the most sophisticated balancing machines in the industry.\u003cbr\u003e\n 10. with the CV in the rear there is no need to change pinion angle on lowered cars.\u003cbr\u003e\n 11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.\u003c\/p\u003e"}

$1,249.99

17873 – 17880 product(s) of 17995

Previous
1
…
2233
2234
2235
2236
2237
…
2250
Next