DRIVESHAFT SHOP AXLE/HUB 850HP KIT FOR 97-01 INTEGRA TYPE R AC66
Level 5.9 Axle/Hub system 850HP for 97-01 USDM Integra Type-R with a B-series motor and Hydra...
Level 5.9 Axle/Hub system 850HP for 97-01 USDM Integra Type-R with a B-series motor and Hydraulic trans (1 year warranty). The new level 5.9 axle/hub set, similar to our Level 5 system but with some major upgrades, the inner cv and now featuring our new tapered 300M bars. We now have created a Pro race worthy system that works with the standard spline size on the differential end, you can now use our system with Quaife and other aftermarket limited slip diffs and spools. What we have done...
DRIVESHAFT SHOP ANTI WHEEL HOP AXLE FOR 04-06 GTO GM41
Product Description What we have done different is this, our skinny bar is smaller in d...
Product Description What we have done different is this, our skinny bar is smaller in diameter than a standard 28 spline a stock 108mm CV would use and its made from 300m, We have rolled the spline onto a ground piece of the material that during the rolling process raises the spline above the center diameter of the bar (this is done with all rolled splines DSS uses), what this also does is allow us to make the axle with out any internal snap ring (no internal groove for a square edg...
DRIVESHAFT SHOP ALUMINUM CV DRIVESHAFT FOR 6SPD 09-12 GENESIS COUPE HYSH-2-A
Now available is the 1-piece 4" Aluminum CV Driveshaft for the 2009-2012 Hyundai Genesis 2.0 ...
Now available is the 1-piece 4" Aluminum CV Driveshaft for the 2009-2012 Hyundai Genesis 2.0 Coupe. This 1-piece shaft will eliminate the factory 2-piece shaft, hanger bearing and rubber couplers, and includes aluminum adapter plates to mount to the transmission and differential. This aluminum shaft uses a 300M stub system mounted into a billet aluminum plate to mount the CV. This ensures not only strength, but lighter weight than the normal way of doing this type of end (look closely at ...
DRIVESHAFT SHOP ALUMINUM DRIVESHAFT FOR 5SPD 89-94 240SX W/O ABS NISH1
S13 Non-ABS with KA24/SR20 5-Speed Aluminum driveshaft. This is our single shaft conversion f...
S13 Non-ABS with KA24/SR20 5-Speed Aluminum driveshaft. This is our single shaft conversion for the 240SX platform. This is a complete 6061-T6 aluminum shaft that is about 1/2 the weight of the factory 2-piece. The shaft features larger, replaceable and greaseable u-joints and can handle about 650WHP. By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the fact the hanger bearing is not moving up and down during acceleration. Availa...
DRIVESHAFT SHOP 550HP ALUM DRIVESHAFT W/BILLET REAR SDAPTER PLATE FOR 04-06 GTO GTOSH1-A
This is the all new 550HP 1-piece shaft from DSS (well maybe not all new just re-instate...
This is the all new 550HP 1-piece shaft from DSS (well maybe not all new just re-instated) after carefully reviewing the needs of the GTO community we have realized the need for a lesser strength shaft that is not only a good value but still gives the car that athletic feeling only a single shaft can give. This shaft will be a 3.5" aluminum shaft with the smaller 1310 joint but will have the Performance Dynamic solid joint that will ensure strength and longevity of the drive train. O...
DRIVESHAFT SHOP 3IN ALUMINUM DRIVESHAFT FOR 05-08 CORVETTE GMC6M-1
Product Description Our new torque tube driveshaft is made from 3" x.125" wall 6061-T6 ...
Product Description Our new torque tube driveshaft is made from 3" x.125" wall 6061-T6 aluminum and uses our own custom machined ends. This will ensure that the shaft will not distort or break like the factory units. The factory shaft is made from a smaller tube (there are 2 different types) and will flex and actually bend during hard acceleration, causing the rubber drives to wear out prematurely. Available for C5 and C6 applications, and can also be made to custom lengths. Rated t...
DRIVESHAFT SHOP 3.5IN CARBON FIBER DRIVESHAFT FOR AUTOMATIC 10-15 CAMARO V8 GMCA11-C
We have released our new carbon shafts with our "new Bond Technology" call for more info abou...
We have released our new carbon shafts with our "new Bond Technology" call for more info about this, its a company secret and were not going to tell the other driveshaft manufacturers what we now know and they dont. Carbon Fiber shaft is15.5lbs We have been working with Carbon fiber for a few months here at DSS, we actually have been waiting for our new 9500Rpm actual speed balancer to be able to not only bring the Carbon shafts into production, but also make sure they are t...
DRIVESHAFT SHOP 3.5IN ALUMINUM DRIVESHAFT FOR MANUAL 08-12 G37 NON IPL INSH2
This is the complete Aluminum Driveshaft for the G37 platform, its weighs only about half as ...
This is the complete Aluminum Driveshaft for the G37 platform, its weighs only about half as much as the factory 2 piece shaft. It's a 3.5" 6061-T6 aluminum shaft that is a direct bolt on. By removing the factory 2 piece shaft the car will lose the excessive motion caused by the hanger bearing moving up and down when you step on the gas. This will make the car react faster to throttle input and make the car feel more responsive. Rated to 1000HP with a 1-year warranty.